适用于 Dell PowerEdge VRTX 的 Dell Chassis Management Controller 3.
注、小心和警告 注: “注”表示帮助您更好地使用该产品的重要信息。 小心: “小心”表示可能会损坏硬件或导致数据丢失,并说明如何避免此类问题。 警告: “警告”表示可能会造成财产损失、人身伤害甚至死亡。 © 2013 - 2018 Dell Inc. 或其子公司。保留所有权利 Dell、EMC 和其他商标为 Dell Inc. 或其子公司的商标。其他商标均为其各自所有者的商标。 2018 - 06 Rev.
目录 1 概览.............................................................................................................................................................. 15 本发行版中的新增功能...................................................................................................................................................16 主要功能............................................................................................................................................................................
访问 CMC 的界面和协议...............................................................................................................................................35 使用其他系统管理工具启动 CMC......................................................................................................................... 36 下载和更新 CMC 固件................................................................................................................................................... 36 设置机箱物理位置和机箱名称....................................
使用 Web 界面将 External Shared PERC 8 卡非高可用性模式转换为高可用性模式................................... 48 使用 RACADM 将 External Shared PERC 8 卡高可用性模式转换为非高可用性模式...................................49 使用 RACADM 将 External Shared PERC 8 卡非高可用性模式转换为高可用性模式...................................49 4 更新固件...................................................................................................................................................... 51 下载 CMC 固件.........................................................................
5 查看机箱信息和监测机箱与组件运行状况....................................................................................................68 查看机箱和组件摘要...................................................................................................................................................... 68 机箱图形.....................................................................................................................................................................69 所选组件信息................................................
设置机箱组.......................................................................................................................................................................85 将成员添加到机箱组................................................................................................................................................ 86 从主机箱中移除成员................................................................................................................................................ 86 解散机箱组..................
使用 CMC Web 界面为多个服务器设置第一引导设备.....................................................................................103 使用 CMC Web 界面为单个服务器设置第一引导设备.....................................................................................103 使用 RACADM 设置第一引导设备....................................................................................................................... 104 配置服务器 FlexAddress.........................................................................................................................
用户的类型...................................................................................................................................................................... 121 修改根用户管理员帐户设置........................................................................................................................................ 124 配置本地用户.................................................................................................................................................................
配置 Linux 在引导期间进行服务器串行控制台重定向..................................................................................... 152 配置 Linux 在引导后进行服务器串行控制台重定向..........................................................................................152 12 使用 FlexAddress 和 FlexAdress Plus........................................................................................................ 154 关于 FlexAddress.....................................................................................................................
使用 CMC Web 界面查看电源预算状态.....................................................................................................................171 使用 RACADM 查看电源预算状态........................................................................................................................ 171 冗余状态和总体电源运行状况.................................................................................................................................... 172 PSU 出现故障后的电源管理。..............................................................
使用 CMC Web 界面查看物理磁盘属性....................................................................................................................188 使用 RACADM 查看物理磁盘驱动器属性................................................................................................................. 188 识别物理磁盘和虚拟磁盘............................................................................................................................................ 188 使用 CMC Web 界面分配全局热备用........................................................
使用 RACADM 配置 PCIe 穿越属性状态............................................................................................................. 201 17 故障排除和恢复........................................................................................................................................ 202 重设忘记的管理密码....................................................................................................................................................202 使用 RACDUMP 收集配置信息、机箱状态和日志.....................................
IOM..................................................................................................................................................................................
1 概览 适用于 Dell EMC PowerEdge VRTX 的 Dell Chassis Management Controller (CMC) 是系统管理硬件和软件解决方案,用于管理 PowerEdge VRTX 机箱。CMC 具有自己的微处理器和内存,由插入其中的模块化机箱供电。 IT 管理员使用 CMC 可以: • 查看资源清册 • 执行配置并监测任务 • 远程打开和关闭机箱和服务器的电源 • 启用针对服务器模块中的服务器和组件事件的警报 • 查看和管理 VRTX 机箱中的存储控制器和硬盘驱动器 • 管理 VRTX 机箱中的 PCIe 子系统 • 为机箱中的 iDRAC 和 I/O 模块提供一对多管理界面 您可以将 PowerEdge VRTX 机箱配置为使用一个 CMC 或冗余 CMC。在冗余 CMC 配置中,如果主 CMC 与机箱或管理网络失去通 信,则备用 CMC 会接管机箱管理。 CMC 为服务器提供多种系统管理功能。电源和温度管理是 CMC 的主要功能,下面列出了这些功能: • 机柜级别电源和温度实时自动管理。 – CMC 可监测系统电源要求,并支持可选的动
• 主要功能 • 机箱概览 • 最低 CMC 版本 • 支持的远程访问连接 • 支持的平台 • 支持的 Web 浏览器 • 管理许可证 • 查看 CMC Web 界面的本地化版本 • 支持的管理控制台应用程序 • 如何使用本指南 • 您可能需要的其他说明文件 • 访问 Dell EMC 支持站点上的文档 本发行版中的新增功能 此版本适用于 Dell EMC PowerEdge VRTX 的 CMC 支持: • 更新 Linux 内核开放源代码软件包至版本 4.9.31。 • 启用 Windows 文件共享协议版本 SMBv2 和 SMBv3。 • 更新 OpenSSH 开放源代码软件包到版本 7.
• 远程电源管理 - 从管理控制台提供远程电源管理功能,如关机和重设任意机箱组件。 • 电源使用情况报告。 • 安全套接字层 (SSL) 加密 - 通过 Web 界面提供安全的远程系统管理。 • Integrated Dell Remote Access Controller (iDRAC) Web 界面的启动点。 • 支持 WS-Management。 • FlexAddress 功能 - 使用特定插槽的机箱分配 WWN/MAC 地址替换工厂分配的全球名称/介质访问控制 (WWN/MAC) 地址。 • 增强型 WWN/MAC 地址资源清册的 iDRAC I/O 标识功能支持。 • 机箱组件状态和运行状况的图形显示。 • 支持一个和多个插槽的服务器。 • LCD iDRAC 配置向导支持 iDRAC 网络配置。 • iDRAC 单点登录。 • 网络时间协议 (NTP) 支持。 • 增强的服务器摘要、电源报告和电源控制页面。 • 强制 CMC 故障转移以及服务器的虚拟重置。 • 多机箱管理,可从主机箱查看最多 8 个其他机箱。 • 配置机箱中的存储组
图 1: CMC 连接器和 LED 表.
图 2: CMC 背面板 表.
图 3: 前面板功能部件和指示灯 - 3.5 英寸硬盘驱动器机箱 表. 3: 前面板 — 功能部件和指示灯 项目 指示灯、按钮或连接器 说明 1 USB 连接器(2 个) 用于将键盘和鼠标连接到系统。 2 LCD 面板 提供系统信息、状态和错误消息,以指示系统何时运行正常或何时需要注意。 3 LCD 菜单滚动按钮(4 个) 使光标移动一格。 4 选择(“选中”)按钮 选择和保存 LCD 屏幕上的项目,以及移动到下一个屏幕。 5 机柜通电指示灯、电源按钮 通电指示灯在机柜开机时亮起。电源按钮控制对系统的 PSU 输出。 6 硬盘驱动器 (HDD) 2.5 英寸硬盘驱动 器机柜 最多 25 个 2.5 英寸可热插拔硬盘驱动器。 3.5 英寸硬盘驱动 器机柜 最多 12 个 3.
项目 指示灯、按钮或连接器 说明 11 服务器模块 最多四个专为机柜配置的 PowerEdge M520、M620、M630 或 M640 服务器模块,或 者两个 M820 服务器模块。 最低 CMC 版本 下表列出了启用罗列的服务器模块所需的最低 CMC 版本。 表. 4: 服务器模块的最低 CMC 版本 服务器 CMC 的最低版本 PowerEdge M520 CMC 1.36 PowerEdge M620 CMC 1.36 PowerEdge M820 CMC 1.36 PowerEdge M630 CMC 2.00 PowerEdge M830 CMC 2.00 PowerEdge M640 CMC 3.00 下表列出了启用罗列的 I/O 模块所需的最低 CMC 版本。 表. 5: I/O 模块的最低 CMC 版本 IOM 交换机 CMC 的最低版本 R1 VRTX 1Gb 直通 CMC 1.20 R1-2401 VRTX 1GbE 交换机 CMC 1.20 R1-2210 VRTX 10Gb 交换机 CMC 2.
支持的平台 CMC 支持为 PowerEdge VRTX 平台设计的模块化服务器。有关 CMC 兼容性的信息,请参阅设备的说明文件。 有关最新支持的平台的信息,请参阅 dell.com/support/manuals 上的 Dell Chassis Management Controller (CMC) Version 3.0 for Dell PowerEdge VRTX Release Notes(适用于 Dell PowerEdge VRTX 的 Dell Chassis Management Controller (CMC) 3.0 版本发行说明)。 支持的 Web 浏览器 Dell PowerEdge VRTX 支持以下 Web 浏览器: • Microsoft Internet Explorer 11 • Microsoft EDGE • Safari 版本 8.0.8 • Safari 版本 9.0.
许可证操作 在执行许可证管理任务之前,请确保获得许可证。有关详细信息,请参阅 support.dell.com 上提供的《概览和功能指南》。 对于一对一许可证管理,您可以使用 CMC、RACADM 和 WS-MAN 执行以下许可操作;对于一对多许可证管理,您可以使用 Dell License Manager 执行以下许可操作: 注: 如果您购买的系统已预先安装所有许可证,请无需进行许可证管理。 • 查看 - 查看当前许可证信息。 • 导入 - 获取许可证后,将许可证存储在本地存储位置,并使用支持的界面之一将其导入 CMC。如果许可证通过验证检查,则会导 入。 • 导出 - 将已安装的许可证导出至外部存储设备进行备份,或者在更换维修部件后重新安装许可证。导出许可证的文件名和格式为 .
许可页面显示与设备相关联的许可证,或者已安装但系统中不存在的设备的许可证。有关导入、导出、删除或替换许可证的更多信 息,请参阅联机帮助。 使用 RACADM 管理许可证 要使用 RACADM 命令管理许可证,请使用以下许可证子命令。 racadm license 有关 RACADM 命令的更多信息,请参阅 dell.com/support/manuals 上的 Chassis Management Controller for PowerEdge VRTX RACADM Command Line Reference Guide(Chassis Management Controller for PowerEdge VRTX RACADM 命令行参考指南)。 CMC 中的可授权功能 此表中列出了基于您的许可证启用的 CMC 功能列表。 表.
功能 Express 企业 双重验证 否 是 PK 验证 否 是 远程文件共享 是 是 插槽资源管理 否 是 机柜级功率上限 否* 是 *对于非默认电源上限设置,Express 许可证仅允许“还原功率上 限”操作。“还原功率上限”将功率上限设置重设为出厂默认值。 动态电源设备接入 否* 是 *对于非默认 DPSE 设置,Express 许可证仅允许“还原 DPSE”操 作。“还原 DPSE”将 DPSE 重设为出厂默认值。 多机箱管理 否 是 高级配置 否 是 机柜级备份 否 是 FlexAddress 启用 否* 是 *对于非默认 FlexAddress 设置,Express 许可证仅允许“还原默认” 操作。“还原默认”将 FlexAddress 设置重设为出厂默认值。 PCIe 适配器映射 是* 是 *Express 许可证最多可为每个服务器分配两个 PCIe 适配器。 虚拟适配器至插槽的映射 否* 是 *对于非默认虚拟适配器映射,Express 许可证仅允许默认映射。 “还原默认”将虚拟适配器映射更改为出厂默认值。
如何使用本指南 本用户指南中的内容指导您使用以下工具执行任务: • Web 界面:此处仅提供与任务相关的信息。有关字段和选项的信息,请参阅可从 Web 界面打开的 CMC for Dell PowerEdge VRTX Online Help(适用于 Dell PowerEdge VRTX 的 CMC 联机帮助)。 • RACADM 命令:此处提供您必须使用的 RACADM 命令或对象。有关 RACADM 命令的更多信息,请参阅 dell.com/cmcmanuals 上 的 Chassis Management Controller for PowerEdge VRTX RACADM Command Line Reference Guide(Chassis Management Controller for PowerEdge VRTX RACADM 命令行参考指南)。 您可能需要的其他说明文件 要从 Dell 支持站点访问说明文件。除了本参考指南,您可以在 dell.
访问 Dell EMC 支持站点上的文档 您可以使用以下链接访问所需的文档: • Dell EMC 企业系统管理文档 — www.dell.com/SoftwareSecurityManuals • Dell EMC OpenManage 文档 — www.dell.com/OpenManageManuals • Dell EMC 远程企业系统管理文档 — www.dell.com/esmmanuals • iDRAC 和 Dell EMC Lifecycle Controller 文档 — www.dell.com/idracmanuals • Dell EMC OpenManage 连接企业系统管理文档 — www.dell.com/OMConnectionsEnterpriseSystemsManagement • Dell EMC 可维护性工具文档 — www.dell.com/ServiceabilityTools • a 转至 www.dell.
2 安装和设置 CMC 本节介绍如何安装 CMC 硬件、建立对 CMC 的访问、配置您的管理环境以使用 CMC 并引导您完成配置 CMC 的任务: • 设置对 CMC 的初始访问。 • 通过网络访问 CMC。 • 添加并配置 CMC 用户。 • 更新 CMC 固件。 有关安装和设置冗余 CMC 环境的更多信息,请参阅了解冗余 CMC 环境。 主题: • 开始之前 • 安装 CMC 硬件 • 在管理站上安装远程访问软件 • 配置 Web 浏览器 • 设置对 CMC 的初始访问 • 访问 CMC 的界面和协议 • 下载和更新 CMC 固件 • 设置机箱物理位置和机箱名称 • 设置 CMC 的日期和时间 • 配置 LED 以识别机箱上的组件 • 配置 CMC 属性 • 使用 CMC Web 界面配置 iDRAC 启动方法 • 使用 RACADM 配置 iDRAC 启动方法 • 使用 CMC Web 界面配置登录锁定策略属性 • 使用 RACADM 配置登录锁定策略属性 • 了解冗余 CMC 环境 • 配置前面板 开始之前 在设置
设置机箱一览表 使用以下任务可准确设置机箱: 1 CMC 与使用浏览器的管理站必须位于同一网络,即管理网络。将以太网网络电缆从 CMC 活动端口连接至管理网络。 2 在机箱中安装 I/O 模块,并将网络电缆连接到机箱。 3 在机箱中插入服务器。 4 将机箱与电源相连。 5 在完成第 7 步中的任务之后,按电源按钮或者从 CMC Web 界面打开机箱电源。 注: 不要打开服务器电源。 6 使用 LCD 面板,导航到“IP 摘要”并单击“选中”按钮选择。在管理系统浏览器(IE、Chrome 或 Mozilla)中使用 CMC 的 IP 地址。要设置 CMC 的 DHCP,请使用 LCD 面板,单击主菜单 > 设置 > 网络设置。 7 使用 Web 浏览器通过键入默认用户名 (root) 和密码 (calvin) 连接到 CMC IP 地址。 8 在 CMC Web 界面中为每个 iDRAC 提供一个 IP 地址并启用 LAN 和 IPMI 界面。 注: 有些服务器上的 iDRAC LAN 接口默认为禁用。此信息可以在 CMC Web 界面的服务器概览 > 设置下找到。这可能是一 个高
在 Linux 管理站上安装 RACADM 1 以 root 用户身份登录到运行支持的 Red Hat Enterprise Linux 或 SUSE Linux Enterprise Server 操作系统的系统,从而在该系统中 安装管理系统组件。 2 将 Dell Systems Management Tools and Documentation DVD 插入 DVD 驱动器。 3 若要将 DVD 装载到所需位置,则使用 mount 命令或类似命令。 注: 在 Red Hat Enterprise Linux 5 操作系统中,通过 -noexec mount 选项自动装载 DVD。该选项不允许从 DVD 运行任何 可执行程序。您需要手动装载 DVD-ROM,然后运行命令。 4 导航至 SYSMGMT/ManagementStation/linux/rac 目录。要安装 RAC 软件,请输入以下命令: rpm -ivh *.
Internet Explorer 要编辑 Internet Explorer 中的例外列表,请执行以下操作: 1 启动 Internet Explorer。 2 单击工具 > Internet 选项 > 连接。 3 在局域网 (LAN) 设置部分,单击 LAN 设置。 4 在代理服务器部分,选择为 LAN 使用代理服务器(这些设置不会应用于拨号或 VPN 连接)选项,然后单击高级。 5 在例外部分,将管理网络上的 CMC 和 iDRAC 地址添加到分号分隔的列表。可以在条目中使用 DNS 名称和通配符。 Mozilla Firefox 要在 Mozilla Firefox 版本 19.
要启用不将加密的页保存到磁盘选项,请执行以下操作: 1 启动 Internet Explorer。 2 单击工具 > Internet 选项 > 高级。 3 在安全部分,选中不将加密的页保存到磁盘选项。 允许在 Internet Explorer 中播放动画 在 Web 界面之间传输文件时,文件传输图标将旋转以显示传输活动。在使用 Internet Explorer 时,您需要配置浏览器才能播放动画。 要将 Internet Explorer 配置为播放动画,请执行以下操作: 1 启动 Internet Explorer。 2 单击工具 > Internet 选项 > 高级。 3 转到多媒体部分,然后选中播放网页中的动画选项。 设置对 CMC 的初始访问 要远程管理 CMC,请将 CMC 连接到您的管理网络,然后配置 CMC 网络设置。 注: 要管理 PowerEdge VRTX 解决方案,它必须连接到您的管理网络。 有关配置 CMC 网络设置的信息,请参阅配置初始 CMC 网络。此初始配置将分配 TCP/IP 联网参数,以支持访问 CMC。 各服务器上的 CMC 和 iDRAC 以及
使用 LCD 面板界面配置 CMC 网络 可以使用 LCD 面板界面来设置 CMC 网络。 注: 通过按住上-下按钮两秒钟,您可以自定义 LCD 显示屏的方向(针对机架式或塔式模式)。或者,您也可以使用右-左按钮。 有关 CMC LCD 面板上的可用按钮的更多信息,请参阅 LCD 导航。 1 2 要启动 CMC 配置,请执行以下操作: • 对于先前未配置的机箱,将显示 LCD Language(LCD 语言)面板。在 LCD Language(LCD 语言)面板中,使用箭头按钮 导航至所需的语言。高亮显示所需的语言时,可通过按中心按钮选择语言。此时会显示 Network Settings(网络设置)面 板。 • 对于先前已配置的机箱,将显示 Main Menu(主菜单)面板。从 Main Menu(主菜单)中,选择 Settings(设置),然后选 择 Network Settings(网络设置)。 在 Network Settings(网络设置)面板中,选择所需的设置模式: • Quick Setup (DHCP)(快速设置 (DHCP))— 选择此模式可以使用 DHCP 地址快速设置 CMC
6 在协议面板中,选择您要为 CMC 使用的 Internet 协议(仅 IPv4、仅 IPv6 或两者),按两下中央按钮。 7 • 如果您选择 IPv4 或 Both(两者),则选择 DHCP 或 Static(静态)模式。请转至步骤 8。 • 此外,如果您选择 IPV6,将会显示 Configure iDRAC(配置 iDRAC)面板。请转至本过程后面的步骤 11。 8 9 在 Mode(模式)面板上,选择 CMC 必须获取 NIC IP 地址的模式。如果选择 DHCP,CMC 会自动从网络上的 DHCP 服务器检 索 IP 配置(IP 地址、掩码和网关)。CMC 将获得在您的网络上分配的唯一 IP 地址。如果您选择 DHCP,请按中央按钮,然后 再次按下中央按钮。此时会显示 Configure iDRAC(配置 iDRAC)面板。请转至本过程后面的步骤 11。 如果选择静态,请按照 LCD 面板上的说明输入 IP 地址、网关和子网掩码。 此时会显示您输入的 IP 信息。按中央按钮,然后再次按下中央按钮。CMC Configuration(CMC 配置)屏幕中列出了您输入的 Static
要将所有 iDRAC 网络设置应用到已安装的服务器,请选择复选图标,然后按下中央按钮。否则,选择“X”图标并按下中央按 钮。 16 在接下来的 iDRAC 配置面板中,将显示以下消息。 Auto-Apply settings to newly-inserted servers? 要将所有 iDRAC 网络设置应用到新安装的服务器,请选择复选图标,然后按下中央按钮。将新服务器插入机箱中时,LCD 将提 示您是否要使用之前配置的网络设置策略自动部署服务器。如果您不需要将 iDRAC 网络设置应用到新安装的服务器,请选择 “X”图标并按下中央按钮。将新服务器插入机箱中时,iDRAC 网络设置不会被配置。 17 在 iDRAC 配置面板中,将显示以下消息。 Apply All Enclosure Settings? 要应用所有机柜设置,请选择复选图标并按下中央按钮。否则,选择“X”图标并按下中央按钮。 18 在 IP Summary(IP 摘要)面板上,等待 30 秒面板显示内容后,查看您提供的 IP 地址以确保地址是否正确。要更正设置,请按 左箭头图标,然后按下中央键返回该设置屏幕。更正 IP 地址后,按
界面 说明 SSH 使用 SSH 运行 RACADM 命令。它所提供的功能与使用加密传输层的 Telnet 控制台相同,可 提供更高的安全性。SSH 服务默认在 CMC 上处于启用状态,可以被禁用。 WSMan WSMan 服务基于 Web 管理服务 (WSMan) 协议执行一对多系统管理任务。您必须使用 WSMan 客户端(如 WinRM 客户端 (Windows) 或 Open WSMan 客户端 (Linux) 来使用 CMC 远程服务功能。您也可以使用 Power Shell 和 Python 来编写 WSMan 界面脚本。 WSMan 是基于简单对象访问协议 (SOAP) 的系统管理协议。CMC 使用 WS–Management 传递分布式管理综合小组 (DMTF) 基于公用信息模型 (CIM) 的管理信息。CIM 信息定义了可 在管理系统中修改的语义和信息类型。 CMC WSMan 实施在端口 443 上采用 SSL 实现传输安全性,并且支持基本验证。通过 WSManagement 获得的数据由映射到 DMTF 配置文件和扩展名配置文件的 CMC 工具界面提 供。 有关更多信息,请参阅:
设置机箱物理位置和机箱名称 您可以设置机箱在数据中心的位置,以及用于在网络上标识机箱的机箱名称(默认名称为 Dell Rack System)。例如,对机箱名称的 SNMP 查询将返回您所配置的名称。 使用 Web 界面设置机箱物理位置和机箱名称 要使用 CMC Web 界面设置机箱位置和机箱名称,请执行以下操作: 1 在左侧窗格中,转至机箱概览,然后单击设置。 2 在常规机箱设置页面中,键入位置属性和机箱名称。有关设置机箱属性的更多信息,请参阅 CMC 联机帮助。 注: 机箱位置字段是可选字段。建议使用数据中心、通道、机架和机架插槽字段来表示机箱的物理位置。 3 单击应用。将保存设置。 使用 RACADM 设置机箱物理位置和机箱名称 要通过使用命令行界面设置机箱名称、位置、日期和时间,请使用 setsysinfo 和 setchassisname 命令。有关更多信息,请参阅 Chassis Management Controller for PowerEdge VRTX RACADM Command Line Reference Guide(Chassis Management Control
使用 CMC Web 界面配置 LED 闪烁 要为一个、多个或所有组件 LED 启用闪烁,请执行以下操作: • 在左侧窗格中,转至下列任意页面: – 机箱概览 > 故障排除。 – 机箱概览 > 机箱控制器 > 故障排除。 – 机箱概览 > 服务器概览 > 故障排除。 注: 只能在此页上选择服务器。 – 机箱概览 > I/O 模块概览 > 故障排除。 – 存储 > 故障排除 > 标识。 注: 在此页面,可以选择每个机柜的物理磁盘、每个机柜的虚拟磁盘以及外部存储组件 LED。 要启用组件 LED 闪烁,请选中物理磁盘驱动器、虚拟磁盘或机柜对应的全选/取消全选选项,然后单击闪烁。要禁用组件 LED 闪烁, 请清除 LED 对应的全选/取消全选选项,然后单击取消闪烁。 使用 RACADM 配置 LED 闪烁 打开到 CMC 的串行/Telnet/SSH 文本控制台,登录并键入: racadm setled -m [-l ],其中 指定您要配置其 LED 的模块。配置选项包括: • server-n 其中 n = 1-4 • switch-1 •
注: 仅在以下情况下需要使用基于 DNS 的方法来启动任何特定 iDRAC: • 机箱设置为 DNS。 • CMC 检测到特定 iDRAC 是使用 DNS 名称配置的。 使用 RACADM 配置 iDRAC 启动方法 要使用 RACADM 更新 CMC 固件,使用 cfgRacTuneIdracDNSLaunchEnable 子命令。有关更多信息,请参阅 dell.
了解冗余 CMC 环境 您可以安装待机 CMC,如果活动 CMC 停止工作,可以使用待机 CMC 继续工作。冗余 CMC 可以提前安装也可以之后安装。为确保 完全冗余或最佳性能,有必要正确连接 CMC 网络电缆。 故障转移发生在以下时候: • 运行 RACADM cmcchangeover 命令。请参阅 dell.com/support/manuals 上的 Chassis Management Controller for PowerEdge VRTX RACADM Command Line Reference Guide(Chassis Management Controller for PowerEdge VRTX RACADM 命令行参考指 南)中的 cmcchangeover 命令部分。 • 在活动 CMC 上运行 RACADM racreset 命令。请参阅 dell.
注: 您可以将机柜配置为使用一个 CMC 或冗余 CMC。在冗余 CMC 配置中,如果主 CMC 与机柜或管理网络失去通信,则待机 CMC 会接替机箱进行管理。 活动 CMC 自举过程 两个 CMC 插槽之间没有任何区别,即插槽不具有优先顺序。而首先安装或启动的 CMC 将担任活动 CMC 角色。如果接通交流电源 时已安装了两个 CMC,则安装在 CMC 机箱插槽 1 中的 CMC 通常担任活动角色。活动 CMC 由蓝色 LED 表示。 如果将两个 CMC 插入已经打开电源的机箱,将需要最多两分钟来进行自动的活动/待机协商。协商完成后,将恢复正常的机箱运 行。 获得冗余 CMC 的运行状况 可以在 Web 界面中查看待机 CMC 的运行状况。有关在 Web 界面中访问 CMC 运行状况的更多信息,请参阅查看机箱信息和监测机 箱及组件运行状况。 配置前面板 您可以配置以下各项: • 电源按钮 • LCD • DVD 驱动器 配置电源按钮 要配置机箱电源按钮,请执行以下操作: 1 2 在左侧窗格中,单击机箱概览 > 前面板 > 设置。 在前面板配置页面的电源按钮配置部分下,选择禁用机箱电源按钮
使用 KVM 访问服务器 要通过 KVM 界面将服务器映射到 KVM 并启用到服务器远程控制台的访问,您可以使用 CMC Web 界面、RACADM 或 LCD 界面。 使用 CMC Web 界面将服务器映射到 KVM 确保 KVM 控制台连接到机箱。 要将服务器映射到 KVM,请执行以下操作: 1 在左侧窗格中,单击机箱概览 > 前面板 > 设置。 2 在前面板配置页上的 KVM 配置部分下,从 KVM 映射列表中选择必须映射到 KVM 的插槽,然后单击应用。 注: 该 KVM 允许映射到所有服务器插槽。插入全高服务器或以全高服务器更换半高服务器不会更改映射行为。但是,如果 KVM 映射到下部的插槽,并且该插槽有全高服务器,则该 KVM 仅可通过上部的插槽使用。您必须将该 KVM 重新映射至上部插槽。 使用 LCD 将服务器映射到 KVM 确保 KVM 控制台连接到机箱。 使用 LCD 将服务器映射到 KVM - 从 LCD 上的主菜单屏幕转到 KVM 映射,选择必须映射的服务器,然后按“确定”。 将服务器映射到 DVD 驱动器 要将服务器映射到机箱 DVD 驱动器,请执行以下操作: 1 在左
3 登录 CMC 您可以以 CMC 本地用户、Microsoft Active Directory 用户或 LDAP 用户身份登录 CMC。默认用户名和密码分别是 root 和 calvin。您还可以使用单点登录或智能卡进行登录。 注: 对于使用 XML 的机箱配置文件,CMC 不支持以下特殊字符作为其用户名或密码: "、!、#、$、%、^、&、*、(、)、-、_、+、=、?、{、}、+、&、>、|、.
注: 使用 IPv6 时,必须用方括号 ([ ]) 将 CMC IP 地址括起来。 以本地用户、Active Directory 用户或 LDAP 用户身份 登录 CMC 要登录 CMC,您必须具有登录 CMC 权限的 CMC 帐户。默认 CMC 用户名是 root,密码是 calvin。root 帐户是随 CMC 一起提供的默 认管理帐户。 注: • 为增强安全性,强烈建议您在首次设置时更改 root 帐户的默认密码。 • 如果启用了证书验证,应提供系统的 FQDN。如果在启用证书验证的同时提供域控制器的 IP 地址,则登录会失败。 CMC 不支持扩展的 ASCII 字符(如 ß、å、é、ü)或主要在非英语语言中使用的其他字符。 要以本地用户、Active Directory 用户或 LDAP 用户身份登录,请执行以下操作: 1 在用户名字段中,键入您的用户名: • CMC 用户名: • Active Directory 用户名:\、/ 或 @。 • LDAP
要使用智能卡以 Active Directory 用户身份登录 CMC,请执行以下操作: 1 使用链接 https:// 登录 CMC。 此时将显示 CMC 登录页面,提示插入智能卡。 注: 如果您更改了默认 HTTPS 端口号(端口 80),则使用
相关链接 将 Telnet 控制台与 CMC 配合使用 配置 Linux Minicom 将 SSH 与 CMC 配合使用 使用 RACADM 访问 CMC RACADM 提供了一组命令,允许您通过基于文本的界面来配置和管理 CMC。可以使用 Telnet/SSH 或串行连接、KVM 上的 Dell CMC 控制台访问 RACADM,或者通过安装在管理站上的 RACADM 命令行界面从远程访问。 RACADM 界面的分类如下: • 远程 RACADM - 允许使用 -r 选项和 CMC 的 DNS 名称或 IP 地址在管理站上运行 RACADM 命令。 注: 远程 RACADM 包含在 Dell Systems Management Tools and Documentation DVD 中,并已安装在管理站上。 • 固件 RACADM - 允许使用 Telnet、SSH 或串行连接登录到 CMC。利用固件 RACADM,可将 RACADM 作为 CMC 固件的一部分实 现。 您可以在脚本中使用远程 RACADM 命令来配置多个 CMC。您不能直接在 CMC Web 界面上运行脚本,因为 CMC 不
更改默认登录密码 在以下情况下,系统会发送警告消息提示您更改默认密码: • 您以配置用户权限登录到 CMC。 • 默认密码警告功能已启用。 • 当前启用的任何帐户的默认用户名和密码都分别是 root 和 calvin。 如果使用 Active Directory 或 LDAP 登录,会显示同一条警告消息。在确定是否有任何(本地)帐户将 root 和 calvin 作为凭据 时,不考虑 Active Directory 和 LDAP 帐户。在使用 SSH、Telnet、远程 RACADM 或 Web 界面登录 CMC 时,也会显示警告消息。对 于 Web 界面、SSH 和 Telnet,会为每个会话显示一条警告消息。对于远程 RACADM,会为每个命令显示警告消息。 要更改凭据,您必须拥有配置用户权限。 注: 如果在 CMC 登录页面上选中不再显示该警告选项,则会生成 CMC 日志消息。 使用 Web 界面更改默认登录密码 当您登录 CMC Web 界面时,如果显示默认密码警告页面,您可以更改密码。要更改密码,请执行以下操作: 1 选择更改默认密码选项。 2 在新密码字段中,输入新密码。 密
使用 Web 界面启用或禁用默认密码警告消息 要在登录 iDRAC 后启用或禁用默认密码警告消息的显示,请执行以下操作: 1 转至机箱控制器 > 用户验证 > 本地用户。 此时将显示用户页面。 2 在默认密码警告部分,选择启用,然后单击应用以允许在登录到 CMC 时显示默认密码警告页面。否则,请选择禁用。 或者,如果此功能已启用并且您不希望为后续登录操作显示警告消息,请在默认密码警告页面上,选择不再显示此警告选项,然 后单击应用。 使用 RACADM 启用或禁用警告消息以更改默认登录密码 要在使用 RACADM 更改默认登录密码时显示警告消息,使用 racadm config -g cfgRacTuning -o cfgRacTuneDefCredentialWarningEnable<0> or <1> 对象。有关更多信息,请参阅 dell.
1 关闭机箱电源。断开 External Shared PERC 8 卡与 MD12x0 机柜之间的所有 SAS 电缆。 2 打开机箱电源。 3 登录 CMC Web 界面,然后导航至存储→控制器→故障排除 ,并启用插槽 5 中 External Shared PERC 8 卡下拉菜单中的容错。 单击应用,并为插槽 6 选择“禁用”,然后单击应用。 4 在高可用性模式下,重设这两个 PERC 可能需要两分钟才会反映出来。 5 关闭机箱电源,并在高可用性模式下连接机柜。 6 打开机箱电源。 7 现在 External Shared PERC 8 卡处于高可用性模式。导航至存储→故障排除→设置故障排除可以查看高可用性状态。 使用 RACADM 将 External Shared PERC 8 卡高可用性模式转 换为非高可用性模式 Dell PowerEdge VRTX 机箱 PCI 插槽 5 和 PCI 插槽 6 中必须要有 2 个 External Shared PERC 8 卡处于高可用性模式。 工作流程 1 关闭机箱电源。断开 External Shared PERC 8 卡与
8 现在 External Shared PERC 8 卡处于高可用性模式。使用以下命令可以查看高可用性状态: racadm raid get controllers -o -p HighAvailabilityMode 。 50 登录 CMC
4 更新固件 可以为以下各项更新固件: • CMC • 机箱基础结构 • 集成机柜或外部机柜的 VRTX 扩展器或存储背板扩展器固件 • 每个机柜的物理磁盘 (HDD) 注: 您只能更新 HDD 固件(必要时)。 您可以更新下列 I/O 组件及服务器组件的固件: • I/O 模块 • BIOS • iDRAC • Lifecycle Controller • 32 位诊断程序 • 操作系统驱动程序包 • 网络接口控制器 • 服务器模块上的 RAID 控制器 注: 固件更新过程可能需要几分钟。 主题: • 下载 CMC 固件 • 查看当前安装的固件版本 • 更新 CMC 固件 • 更新机箱基础结构固件 • 更新服务器 iDRAC 固件 • 更新服务器组件固件 • 查看固件资源清册 • 使用 CMC Web 界面保存机箱资源清册报告 • 使用 CMC Web 界面配置网络共享 • Lifecycle Controller 作业操作 • 回滚服务器组件固件 • 升级服务器组件固件 • 删除计划的服务器组件固件作业 •
更新 VRTX 机箱固件时,建议按以下顺序更新机箱组件的固件版本: 1 刀片组件固件 2 CMC 固件 3 机箱基础结构固件 4 Shared PERC8 固件(集成和外部) 5 内部存储背板固件和外部机柜扩展器 6 HDD 固件(外部机柜与集成机柜) 有关 VRTX 机箱更新顺序的更多信息,请参阅 dell.com/cmcmanuals 上的 CMC Firmware 3.0 Release Notes(CMC 固件 3.
注: • CMC 固件无法更新为 2.0 以外的任何较早版本,因为机箱已配置为使用 1600W PSU。 • CMC 固件更新或回滚仅支持固件版本 1.2、1.25、1.3、1.31、1.35、1.36、2.0、2.01 和 2.
要更新 CMC 和主板固件,请执行以下操作: 1 更新 CMC 固件。 2 更新主板固件。 3 关闭机箱电源,然后在 PCIe 插槽 5 和插槽 6 中安装共享存储适配器。 4 打开机箱电源。 5 打开机箱电源后,更新外部共享存储适配器。 注: 默认情况下,外部共享外部 PERC 8 卡处于非容错模式。它必须更改为容错模式后,才能进行相应的布线。有关更多信息, 请参阅将 PowerEdge VRTX 升级至支持共享存储扩展。 在某个事件中,如果要回滚 CMC 或 MPC/主板固件或 CMC 和 MPC 固件版本,请执行以下任务: 要回滚 CMC 和主板固件: 1 关闭机箱电源。 2 卸下 PCI 插槽中的所有外部存储适配器。 3 给机箱通电。 4 回滚 CMC 和/或主板固件。 如检测到外部共享存储适配器,不能将 CMC 降级。 如果按顺序执行步骤,系统行为将会随机执行并且系统部件可能会变得不稳定。CMC 日志 IOV 或 RAID 控制器消息。在较早版本的 CMC 中,仅 PERC 1 和 PERC 2 的共享存储 VA 映射可见。以前版本的 CMC 中不存在所有外部共享
• 要取消该过程,请选择取消文件传输和更新选项。该选项仅在文件传输过程中可用。 • 更新状态字段显示固件更新状态。 注: CMC 的更新过程可能需要几分钟时间。 使用 RACADM 更新 CMC 固件 要使用 RACADM 更新 CMC 固件,请使用 fwupdate 子命令。有关 RACADM 命令的更多信息,请参阅 Chassis Management Controller for PowerEdge VRTX RACADM Command Line Reference Guide(Chassis Management Controller for PowerEdge VRTX RACADM 命令行参考指南)。 注: 运行固件更新命令的方式是一次只打开一个远程 RACADM 会话。 更新机箱基础结构固件 机箱基础结构更新操作可更新主板和 PCIe 子系统管理固件等组件。 注: 要更新机箱基础结构固件,请确保机箱已打开电源并且服务器已关机。 注: 主板升级到更高版本时,机箱和 Chassis Management Controller 可能会重新引导。 使用 CMC Web 界面更新机箱基础结构
更新固件后,iDRAC(服务器上)将重设并暂时不可用。 注: 要使用 Chassis Management Controller 更新 iDRAC 固件,机箱中必须有 SD 卡。但是,要通过 iDRAC Web 界面更新 iDRAC 固件,CMC 中不需要有 SD 卡。有关从 CMC 中启动 iDRAC Web 界面的更多信息,请参阅从服务器状态页启动 iDRAC。 使用 Web 界面更新服务器 iDRAC 固件 要更新服务器中的 iDRAC 固件,请执行以下操作: 1 转至以下任一页: • 机箱概览 > 更新。 • 服务器概览 > 更新 > 服务器组件更新。 此时将显示 Firmware Update(固件更新)页面。 注: 您还可以使用机箱概览 > 服务器概览 > 更新来更新服务器 iDRAC 固件。有关更多信息,请参阅更新服务器组件固件。 2 要更新 iDRAC7 或 iDRAC8 固件,请分别在 iDRAC7 固件或 iDRAC8 固件部分中,单击要更新其固件的服务器的更新链接。 此时将显示服务器组件更新页面。要继续,请参阅更新服务器组件固件。 3 在固件映像字段中,输入管理站或共享
从文件更新方法使您能够使用本地系统中存储的 DUP 文件更新服务器组件固件。您可以选择单独的服务器组件以使用所需的 DUP 文 件更新固件。您可以通过使用 SD 卡存储超过 48 MB 内存大小的 DUP 文件来一次更新大量组件。 注: 请注意下列事项: • 在选择单独的服务器组件进行更新时,确保所选组件之间不存在依赖性。否则,如果选择和其他组件有依赖性的一些组件进 行更新可能导致服务器突然停止工作。 • 确保以建议的顺序更新服务器组件。否则,组件固件更新的过程可能会失败。 始终采用以下顺序更新服务器组件固件模块: – BIOS – Lifecycle Controller – iDRAC 一键更新所有刀片或从网络共享更新方法使您能够使用网络共享中存储的 DUP 文件更新服务器组件固件。您可以使用基于 Dell Repository Manager (DRM) 的更新功能访问网络共享中存储的 DUP 文件并通过一个操作更新服务器组件。您可以使用 Dell Repository Manager 设置固件 DUP 和二进制映像的自定义远程存储库,并在网络共享上进行共享。或者,使用 Dell Reposit
服务器组件更新顺序 对于单个组件的更新,必须按以下顺序为服务器组件更新固件版本: • iDRAC • Lifecycle Controller • 诊断程序(可选) • 操作系统驱动程序包(可选) • BIOS • NIC • RAID • 其他组件 注: 当一次性更新所有服务器组件的固件版本时,由 Lifecycle Controller 处理更新顺序。 启用 Lifecycle Controller 在打开服务器电源时,您可以启用 Lifecycle Controller 服务: • 对于 iDRAC 服务器,在引导控制台中,按 键访问系统设置。 • 在系统设置主菜单页上,转到 iDRAC 设置 > Lifecycle Controller,单击已启用。转到系统设置主菜单页,并单击完成以保存设 置。 “取消系统服务”可用于取消挂起的所有计划作业并将其从队列中移除。 有关 Lifecycle Controller 和支持的服务器组件以及设备固件管理的更多信息,请参阅: • Lifecycle Controller 远程服务快速入门指南。 • dellt
筛选进行固件更新的组件 可同时检索所有服务器上所有组件和设备的相关信息。为了管理这些数量庞大的信息,Lifecycle Controller 提供了各种筛选机制。 注: 要使用此功能,必须具有企业版许可证。 服务器组件更新页面中的组件/设备更新筛选器部分允许您基于组件筛选信息,仅可用于通过文件更新模式。 这些筛选器支持: • 选择一个或多个组件或设备类别以便于查看。 • 对服务器的组件和设备的固件版本进行比较。 • 基于类型或型号缩小特定组件或设备类别的范围,从而自动筛选所选组件和设备。 注: 自动筛选功能在使用 Dell Update Package (DUP) 时非常重要。DUP 的更新编程可基于组件或设备的类型或型号。自动筛 选行为旨在将进行初始选择后的后续选择决策减至最少。 以下是应用筛选机制的一些示例: • 如果选定 BIOS 筛选器,则只显示所有服务器的 BIOS 资源清册。如果服务器组包含许多服务器型号,并且选定一台服务器用于 BIOS 更新,则自动筛选逻辑会自动删除不匹配所选服务器型号的所有其他服务器。这将确保选择的 BIOS 固件更新映像 (DUP) 与 正确的服务器型号兼容。
使用 RACADM 筛选进行固件更新的组件 要使用 RACADM 筛选进行固件更新的组件,请使用 getversion 命令: racadm getversion -l [-m ] [-f ] 有关更多信息,请参阅 dell.
字段 说明 组件/设备 显示服务器上组件或设备的说明。如果列宽过窄,鼠标悬停触发工具会提供说明视图。 当前版本 显示服务器上组件或设备的当前版本。 回滚版本 显示服务器上组件或设备的回滚版本。 作业状态 显示服务器上计划的任何操作的作业状态。作业状态会持续动态更新。如果作业完成并检测到状态为“已 完成”,则服务器上的任何组件或设备的固件版本发生更改时,会自动刷新组件和设备的固件版本。当前 状态旁还会显示信息图标,提供关于当前作业状态的附加信息。可通过单击或将鼠标悬停在图标上来查看 此信息。 更新 单击可选择服务器上进行固件更新的组件或设备。 使用 RACADM 查看固件资源清册 要使用 RACADM 查看固件资源清册,请使用 getversion 命令: racadm getversion -l [-m ] [-f ] 有关更多信息,请参阅 dell.
• 域名 • 用户名 • 密码 • SMB 版本 注: 仅当协议类型为 CIFS 时,SMB 版本选项才可用。 注: 如果正在使用借助域注册的 CIFS,并且使用带有 CIFS 本地用户凭据的 IP 访问 CIFS,则必须在域名字段中输入主机名 或主机 IP。 有关更多信息,请参阅 CMC Online Help(CMC 联机帮助)。 3 单击测试目录以验证目录是否可读及可写。 4 单击测试网络连接来检查是否可访问网络共享位置。 应用 SMB 版本时,将卸载现有的网络共享,并且单击测试网络连接或导航到其他 GUI 页面时再次安装。 5 单击应用将更改应用到网络共享属性。 注: 单击后退返回服务器组件更新页面。 Lifecycle Controller 作业操作 注: 要使用此功能,必须具有企业版许可证。 您可以执行 Lifecycle Controller 操作,例如: • 重新安装 • 回滚 • 更新 • 删除作业 一次只能执行一种类型的操作。不支持的组件和设备可能会作为资源清册的一部分列出,但不允许 Lifecycle Controller 操作。 要执行 Li
使用 Web 界面重新安装服务器组件固件 要重新安装服务器组件固件,请执行以下操作: 1 在左侧窗格中,单击服务器概览 > 更新。 2 在服务器组件更新页面上的选择更新类型部分中,选择从文件更新。 3 在当前版本列中,选择您要重新安装固件的组件或设备对应的选项。 4 选择以下选项之一: 5 • 立即重新引导 - 立即重新启动服务器。 • 下一次重新引导时 - 稍后手动重新启动服务器。 单击重新安装。将为所选组件或设备重新安装固件版本。 回滚服务器组件固件 您可以在一个或多个服务器上为所选的组件或设备安装以前已安装的固件的固件映像。固件映像可在回滚操作的 Lifecycle Controller 中获得。可用性受 Lifecycle Controller 的版本兼容性逻辑影响。它还假定 Lifecycle Controller 为以前的更新提供便利。 注: 要使用此功能,必须具有企业版许可证。 使用 CMC Web 界面回滚服务器组件固件 要将服务器组件固件版本回滚到较早的版本,请执行以下操作: 1 在左侧窗格中,单击服务器概览→ 更新。 2 在服务器组件更新页面上的选择更新
通常,所有 Lifecycle Controller 更新都计划立即执行。不过,系统服务可延迟一段时间再执行更新。在这种情况下,会由于通过 CMC 托管的远程共享不再可用而导致更新失败。 使用 CMC Web 界面从文件升级服务器组件固件 使用从文件更新方法,将服务器组件固件版本升级至下个版本: 1 在 CMC Web 界面的系统树中,转至服务器概述,然后单击更新 > 服务器组件更新。 此时将显示服务器组件更新页。 2 在选择更新类型部分中,选择从文件更新。有关更多信息,请参阅使用 CMC Web 界面选择服务器组件固件更新类型 3 在组件/设备更新筛选器部分中,筛选组件或设备(可选)。有关更多信息,请参阅使用 CMC Web 界面筛选进行固件更新的组 件。 4 在更新列中,选中要将固件更新到下一版本的组件或设备对应的复选框。使用 CRTL 键快捷方式选择要在所有适用服务器上进行 更新的组件或设备类型。按住 CRTL 键以黄色高亮度显示所有组件。按住 CRTL 键的同时,通过启用更新列中关联的复选框选择 所需的组件或设备。 此时将显示另外一个表,该表列出所选类型的组件或设备以及固件映像文件的选
• CMC 版本必须为版本 2.0 或更高版本。 • 必须在服务器上启用 Lifecycle Controller。 • 必须在第 12 代服务器上提供 iDRAC 版本 1.50.50 或更高版本。 • 必须在系统上安装 Dell Repository Manager 1.8 或更高版本。 • 您必须具有 CMC 管理员权限。 使用 CMC Web 界面从网络共享升级服务器组件固件 使用从网络共享更新模式,将服务器组件固件版本升级至下个版本: 1 在 CMC Web 界面的系统树中,转至服务器概览,然后单击更新 > 服务器组件更新。 此时将显示服务器组件更新页。 2 在选择更新类型部分中,选择从网络共享更新。有关更多信息,请参阅选择服务器组件固件更新类型。 3 如果网络共享未连接,则配置机箱的网络共享。要配置或编辑网络共享详细信息,在“网络共享属性”表中单击编辑。有关更多 信息,请参阅使用 CMC Web 界面配置网络共享。 4 单击保存资源清册报告以导出包含组件和固件详细信息的机箱资源清册文件。 Inventory.
表. 13: 服务器组件更新至 N 版本时支持的服务器组件版本 平台 服务器组件 上一组件版本(N-1 版本) 更新后的组件版本(N 版本) M520 iDRAC 2.52.52.52 2.60.60.60 Lifecycle Controller 2.52.52.52 2.60.60.60 诊断程序 4231A0 4247A1 BIOS 2.4.2 2.6.1 NIC 19.2.0 20.00.00.13 iDRAC 2.52.52.52 2.60.60.60 Lifecycle Controller 2.52.52.52 2.60.60.60 诊断程序 4231A0 4247A1 BIOS 2.5.4 2.6.1 iDRAC 2.52.52.52 2.60.60.60 Lifecycle Controller 2.52.52.52 2.60.60.60 诊断程序 4231A0 4247A1 BIOS 2.6.1 2.6.1 iDRAC 2.52.52.52 2.60.60.
删除计划的服务器组件固件作业 注: 要使用此功能,必须具有企业版许可证。 您可以删除为一个或多个服务器上所选组件和/或设备计划的作业。 使用 Web 界面删除计划的服务器组件固件作业 要删除计划的服务器组件固件作业,请执行以下操作: 1 在左侧窗格中,单击服务器概览,然后单击更新。 2 在服务器组件更新页面中,筛选组件或设备(可选)。 3 在作业状态列中,如果作业状态旁边显示复选框,则表示 Lifecycle Controller 作业正在进行并且当前处于所指示的状态。可选择 该作业进行作业删除操作。 4 单击删除作业。将删除所选组件或设备的作业。 使用 CMC Web 界面更新存储组件 确保已下载所需存储组件的 DUP。 要更新存储组件,请执行以下操作: 1 在左侧窗格中,单击机箱概览 > 存储 > 更新。 2 在存储组件更新页面中,单击浏览。 此时会显示选择要上载的文件对话框 3 浏览至所需的 DUP 文件下载到并从 Dell 支持站点保存到的位置,选择此 DUP 文件,然后单击打开。 此 DUP 文件名和路径会显示在浏览字段中。 4 单击上载。 此 DUP 上载至 CMC
5 查看机箱信息和监测机箱与组件运行状况 您可以查看信息并监测以下各项的运行状况: • 活动和待机 CMC • 所有服务器和单个服务器 • IO 模块 • 风扇 • 电源设备 (PSU) • 温度传感器 • 硬盘驱动器 • LCD 部件 • 存储控制器 • PCIe 设备 注: 外部组件的运行状况影响存储组件整体运行状况、现有存储运行状况以及 VRTX 中的集成存储组件。这表明外部组件不影响 机箱中任何组件的运行状况。 主题: • 查看机箱和组件摘要 • 查看机箱摘要 • 查看机箱控制器信息和状态 • 查看所有服务器的信息和运行状况 • 查看单个服务器的运行状况和信息 • 查看 IOM 的信息和运行状况 • 查看风扇的信息和运行状况 • 查看前面板属性 • 查看 KVM 信息和运行状况 • 查看 LCD 信息和运行状况 • 查看温度传感器的信息和运行状况 • 查看存储容量和存储组件的状态 查看机箱和组件摘要 当您登录 CMC Web 界面后,机箱运行状况页面显示机箱及其组件的运行状况。它会显示机箱及其组件的图形视图。它是动态更新 的,组件子图形覆盖层和文本提示自动更改以反映当前状态。 68 查看机箱信
要查看机箱运行状况,请单击机箱概览。系统会显示机箱、活动和待机 CMC、服务器模块、IO 模块 (IOM)、风扇、鼓风机、电源设 备装置 (PSU)、LCD 部件、存储控制器和 PCIe 设备的整体运行状况。单击每个组件可显示该组件的详情。此外,还会显示 CMC 硬 件日志中的最新事件。有关更多信息,请参阅 Online Help(联机帮助)。 注: 机箱重新启动或 RAC 重设后,处于脱机状态的物理驱动器的警报将被移除。 如果将您的机箱配置为组主机箱,则会在登录后显示组运行状况页。该页显示机箱级信息和警报。所有活动的重要和不重要的警报都 会显示出来。 机箱图形 机箱以正面视图、背面视图和顶部视图呈现(分别为上图和下图)。在前视图中显示服务器、DVD、硬盘驱动器、KVM 和 LCD,在 后视图中显示其余组件。选中组件显示为蓝色,并且单击所需组件的图像可进行相应控制。机箱中存在组件时,安装了组件的位置 (插槽)的图表中将显示组件类型的图标。空位置显示为炭灰色的背景。组件图标可指示组件的状态。其他组件显示图标代表具体组 件。将光标悬停在组件上可显示关于该组件的工具提示的附加信息。 表.
表.
注: 在多机箱管理 (MCM) 中,所有与服务器关联的 Quick Links(快速链接)均不会显示。 表.
• 电源设备 PCIe 设备 风扇 鼓风机 SPERC 插槽 External Shared PERC 8 卡插槽 IOM 插槽 72 状态 电源状态 • 电源状态 • 查看该物理磁盘的控制器 • 固件版本 • 查看该物理磁盘的虚拟磁盘 • 大小 • 类型 • 电源设备状况 • 功耗 • 系统预算 容量 • 已安装 • 型号 • PCIe 状况 • 已分配 • 服务器插槽映射 • PCIe 设置 • 厂商 ID • 设备 ID • Slot Type(插槽类型) • 已分配功率 • 结构 • 电源状态 • 速度 • 警告阈值 • 风扇状况 • PWM(最大值百分比) • 严重阈值 • 风扇配置 • 风扇补偿 • 速度 • 警告阈值 • 风扇状况 • PWM(最大值百分比) • 严重阈值 • 风扇配置 • 增强型冷却方式 • 已安装 • 型号 • 控制器状态 • 已分配 • 服务器插槽映射 • 控制器设置 • 厂商 ID •
• Role(角色) • 启动 IOM GUI Service Tag 查看服务器型号名称和服务标签 通过以下步骤可及时获得每台服务器的型号名称和服务标签: 1 在左侧窗格中的服务器概览树节点下,所有服务器(SLOT-01 到 SLOT-04)都在服务器列表中显示。如果某个插槽中没有服务 器,则图片中的相应图像是灰色的。如果全高服务器占用了插槽 1 和插槽 3,则插槽 3 中的插槽名称将显示为 1 的扩展。 2 将光标悬停在服务器的插槽名称或插槽编号上,工具提示会显示服务器的型号名称和服务标签(如果可用)。 查看机箱摘要 要查看机箱摘要信息,请在左侧窗格中单击机箱概览 > 属性 > 摘要。 此时将显示机箱摘要页面。有关此页面的更多信息,请参阅联机帮助。 查看机箱控制器信息和状态 要查看机箱控制器的信息和状态,请在 CMC Web 界面中单击机箱概览 > 机箱控制器。 此时将显示机箱控制器状态页面。有关更多信息,请参阅联机帮助。 查看所有服务器的信息和运行状况 要查看所有服务器的运行状况,请执行以下任一操作: • 单击机箱概览。机箱运行状况页面显示机箱中安装的所有服务器的图形概览。服务器
将显示机箱运行状况页。左侧窗格中的图形显示机箱的前视图、后视图和侧视图,并包含 IOM 的运行状况。IOM 运行状况由 IOM 子图形的重叠标记表示。将光标移到各个 IOM 子图形上方,文本提示将提供有关该 IOM 的附加信息。单击 IOM 子图形可在 右窗格中查看 IOM 信息。 2 转到机箱概览 > I/O 模块概览。 I/O 模块状态页提供与机箱关联的 IOM 的概览。有关更多信息,请参阅联机帮助。 注: 更新或关机后再开机 IOM/IOA 后,请确保 IOM/IOA 的操作系统也会正确引导。否则,IOM 状态显示为“脱机”。 查看风扇的信息和运行状况 CMC 可根据系统事件来增减风扇速度,从而控制机箱风扇的速度。您可以以三种模式运行风扇:如低、中、高。有关配置风扇的更 多信息,请参阅联机帮助。 要通过使用 RACADM 命令设置风扇的属性,请在 CLI 界面键入以下命令: racadm fanoffset [-s ] 有关 RACADM 命令的更多信息,请参阅 dell.
在启用“风扇偏移”的任一选项时,功耗都会增加。设置“低”偏移时,系统响声会加大,设置“中”偏移时,系统响声会明显加 大,设置“高”偏移时,系统响声会显著加大。未启用“风扇偏移”选项时,风扇速度将降低到系统冷却安装的硬件配置所需的默认 速度。 要设置偏移功能,请转至机箱概述 > 风扇 > 设置。在高级风扇配置页面上的风扇配置表中,从与风扇偏移对应的值下拉式菜单中, 选择相应的选项。 有关“风扇偏移”功能的更多信息,请参阅联机帮助。 要通过使用 RACADM 命令设置这些功能,请使用以下命令: racadm fanoffset [-s ] 有关与风扇偏移相关的 RACADM 命令的更多信息,请参阅 dell.
查看 LCD 信息和运行状况 要查看 LCD 的运行状况,请执行以下操作: 1 在左侧窗格中,单击机箱概览。 将显示机箱运行状况页。左侧窗格显示机箱的前视图。LCD 运行状况由 LCD 子图形的重叠标记表示。 2 移动光标到 LCD 子图形上。相应的文本提示或屏幕提示会提供有关 LCD 的附加信息。 3 单击 LCD 子图形可在右窗格中查看 LCD 信息。有关更多信息,请参阅联机帮助。 或者,转到机箱概览 > 前面板 > 属性 > 状态。在状态页的 LCD 属性下,您可以查看机箱上可用 LCD 的状态。有关更多信息,请 参阅联机帮助。 查看温度传感器的信息和运行状况 要查看温度传感器的运行状况,请执行以下操作: 在左侧窗格中,单击机箱概览 > 温度传感器。 温度传感器状态页显示整个机箱(机箱和服务器)上温度探测器的状态和读数。有关更多信息,请参阅联机帮助。 注: 无法编辑温度探测器值。任何超过阈值的更改都会生成警报,从而造成风扇速度发生变化。例如,如果 CMC 环境温度 探测器超过阈值,机箱的风扇速度会提高。 查看存储容量和存储组件的状态 要查看存储组件的容量和容错状态,请执行以下操作之一: 1
6 配置 CMC 使用 Chassis Management Controller 可以配置属性、设置用户和警报,以执行远程管理任务。 在开始配置 CMC 之前,必须首先配置 CMC 网络设置,以允许从远程管理 CMC。该初始配置分配 TCP/IP 联网参数,以允许访问 CMC。有关更多信息,请参阅设置对 CMC 的初始访问。 可以使用 Web 界面或 RACADM 来配置 CMC。 注: 当首次配置 CMC 时,您必须以 root 用户登录,以在远程系统上执行 RACADM 命令。可创建另一个用户,使之具有配置 CMC 的权限。 在设置 CMC 并执行基本配置之后,可以执行以下操作: • 根据需要修改网络设置。 • 配置访问 CMC 的界面。 • 配置 LCD 显示屏。 • 根据需要设置机箱组。 • 配置服务器、I/O 模块或前面板。 • 配置 VLAN 设置。 • 获取所需证书。 • 添加和配置具有权限的 CMC 用户。 • 配置并启用电子邮件警报和 SNMP 陷阱。 • 根据需要设置功率上限策略。 注: 在两种 CMC 界面(GUI 和 CLI)的属性字符串中,不能
查看和修改 CMC 网络 LAN 设置 LAN 设置(如团体字符串和 SMTP 服务器 IP 地址)将影响 CMC 和机箱的外部设置。 如果机箱中有两个 CMC(活动和待机),并且它们均连接至网络,则在出现故障转移时,待机 CMC 自动继承活动 CMC 的网络设 置。 如果在启动时启用 IPv6,则会每 4 秒发送三个路由器请求。如果外部网络交换机运行生成树协议 (STP),则外部交换机端口可在发送 IPv6 路由器请求时阻塞 12 秒以上。在此情况下,IPv6 连接会在一段时间内受限,直到 IPv6 路由器无偿发送路由器广告。 注: 更改 CMC 网络设置可能会断开当前网络连接。 注: 必须具备机箱配置管理员权限才可以设置 CMC 网络设置。 使用 CMC Web 界面查看和修改 CMC 网络 LAN 设置 要使用 CMC Web 界面查看和修改 CMC 网络 LAN 设置,请执行以下操作: 1 在左侧窗格中,单击机箱概览,然后单击网络。网络配置页面将显示当前的网络设置。 2 根据需要修改常规、IPv4 或 IPv6 设置。有关更多信息,请参阅联机帮助。 3 单击各个部分的应用更改以应用这些设置
要启用或禁用 CMC IPv6 寻址,请键入: racadm config -g cfgIpv6LanNetworking -o cfgIPv6Enable 1 racadm config -g cfgIpv6LanNetworking -o cfgIPv6Enable 0 注: 请注意下列事项: • 更改网络设置和实际应用之间会有 30 秒钟的延迟。 • 默认情况下禁用 CMC IPv6 寻址。 默认情况下,对于 IPv4,CMC 自动从动态主机配置协议 (DHCP) 服务器请求并获取 CMC IP 地址。您可以禁用 DHCP 功能并指定静 态 CMC IP 地址、网关和子网掩码。 对于 IPv4 网络,要禁用 DHCP 并指定静态 CMC IP 地址、网关和子网掩码,请键入: racadm racadm racadm racadm config config config config -g -g -g -g cfgLanNetworking cfgLanNetworking cfgLanNetworking cfgLanNetworking -o -o -o -o cfgNicUseD
对于 IPv4,要设置主要和次要 DNS IP 服务器地址,请键入: racadm config -g cfgLanNetworking -o cfgDNSServer1 racadm config -g cfgLanNetworking -o cfgDNSServer2 对于 IPv6,要设置主要和次要 DNS IP 服务器地址,请键入: racadm config -g cfgIPv6LanNetworking -o cfgIPv6DNSServer1 racadm config -g cfgIPv6LanNetworking -o cfgIPv6DNSServer2 配置 IPv4 和 IPv6 的 DNS 设置 • CMC 注册 - 若要在 DNS 服务器上注册 CMC,请键入: racadm config -g cfgLanNetworking -o cfgDNSRegisterRac 1 注: 有些 DNS 服务器只注册 31 个或更少字符的名称。确保指定的名称在 DNS 要求的
其中 是 576–1500(包含起始值;默认值为 1500)之间的值。 注: IPv6 要求的最小 MTU 是 1280。如果启用了 IPv6 并且 cfgNetTuningMtu 设置为更小的值,则 CMC 会使用 1280 的 MTU。 配置 CMC 网络和登录安全设置 CMC 中的 IP 地址阻止和用户阻止功能使您能够防止由于尝试猜测密码带来的安全问题。此功能使您能够阻止一系列的 IP 地址和可 以访问 CMC 的用户。CMC 中默认启用 IP 地址阻止功能。您可以使用 CMC Web 界面或 RACADM 设置 IP 范围属性。要使用 IP 地址 阻止和用户阻止功能,请使用 CMC Web 界面或 RACADM 启用选项。配置登录锁定策略设置,使您能够设置特定用户的登录尝试失 败或 IP 地址的数量。在超出此限制后,被阻止的用户只能在惩罚时间之后登录。 注: IP 地址阻止功能仅适用于 IPV4 地址。 使用 CMC Web 界面配置 IP 范围属性 注: 要执行以下任务,必须具备机箱配置管理员权限。 要使用 CMC Web 界面配置 IP 范围属性,执行以下操作: 1 在左侧窗格中
为 CMC 配置虚拟 LAN 标签属性 虚拟 LAN 功能使多个 VLAN 共同存在于同一物理网络电缆上,并允许出于安全性或负载管理的目的而分离网络流量。启用 VLAN 功 能时,每个网络信息包将分配有 VLAN 标签。 使用 RACADM 为 CMC 配置虚拟 LAN 标签属性 1 启用外部机箱管理网络的虚拟 LAN (VLAN) 功能: racadm config -g cfgLanNetworking -o cfgNicVLanEnable 1 2 为外部机箱管理网络指定 VLAN ID: racadm config -g cfgLanNetworking -o cfgNicVlanID 的有效值为 1-4000 和 4021-4094。默认值为 1。 例如: racadm config -g cfgLanNetworking -o cfgNicVlanID 1 3 然后,为外部机箱管理网络指定 VLAN 优先级: racadm config -g cfgLanNetworking -o cfgNicVLanPriority
联邦信息处理标准 美国联邦政府的机构和承包商使用联邦信息处理标准 (FIPS),计算机安全性标准,该标准与具有通信接口的所有应用程序相关。 140-2 共有四种级别 — 1 级、2 级、3 级和 4 级。FIPS 140–2 系列规定所有通信接口必须具有以下安全性属性: • 验证 • 机密性 • 消息完整性 • 不可否认性 • 可用性 • 访问控制 如果任何属性依赖于加密算法,这些算法必须获得 FIPS 的批准。 默认情况下,FIPS 模式处于禁用状态。FIPS 已启用时,OpenSSL FIPS 的最小密钥大小为 SSH-2 RSA 2048 位。 注: 当在机箱中启用 FIPS 模式时,不支持 PSU 固件更新。 有关更多信息,请参阅 CMC Online Help(CMC 联机帮助)。 下列功能/应用程序支持 FIPS。 • Web GUI • RACADM • WSMan • SSH v2 • SMTP • Kerberos • NTP 客户端 • NFS 注: SNMP 不符合 FIPS 规范。在 FIPS 模式下,除消息摘要算法版本 5 (MD
。 禁用 FIPS 模式 要禁用 FIPS 模式,将 CMC 重设为默认出厂设置。 配置服务 您可以在 CMC 上配置和启用以下服务: • CMC 串行控制台 - 支持使用串行控制台访问 CMC。 • Web 服务器 - 支持访问 CMC Web 界面。禁用 Web 服务器也会禁用远程 RACADM。 • SSH - 支持通过固件 RACADM 访问 CMC。 • Telnet - 支持通过固件 RACADM 访问 CMC • RACADM - 支持使用 RACADM 访问 CMC。 • SNMP - 支持 CMC 发送事件的 SNMP 陷阱。 • 远程系统日志 - 支持 CMC 将事件记录到远程服务器。要使用此功能,必须具有企业版许可证。 CMC 包含 Web 服务器,它配置为使用行业标准 SSL 安全协议通过 Internet 接受来自客户端的加密数据,或者向客户端传输加密数 据。Web 服务器包含 Dell 自签名的 SSL 数字证书(服务器 ID),并且负责接受和响应来自客户端的安全 HTTP 请求。Web 界面和远 程 RACADM CLI 工具需要该服务与 CMC
有关各字段的信息,请参阅联机帮助。 3 单击应用,然后更新所有默认超时和最大超时限制。 使用 RACADM 配置服务 要启用和配置各种服务,请使用以下 RACADM 对象: • cfgRacTuning • cfgRacTuneRemoteRacadmEnable 有关这些对象的更多信息,请参阅 dell.
机箱组最多可包含八个成员。此外,主机箱或成员只能加入一个组。不能将作为某个组的主机箱或成员的机箱加入到另一个组中。可 以从组中删除机箱,然后再将其添加到不同组。 要使用 CMC Web 界面设置机箱组,请执行以下操作: 1 以机箱管理员权限登录到主机箱。 2 单击设置 > 组管理。 3 在机箱组页面中的角色下,选择主机箱。此时将显示用于添加组名称的字段。 4 在组名称字段中键入组名称,然后单击应用。 注: 适用于域名的相同规则也适用于组名称。 创建机箱组后,GUI 会自动切换到机箱组页面。左侧窗格按组名称和主机箱指示组,并且未填充的成员机箱会在左侧窗格中显 示。 将成员添加到机箱组 设置机箱组后,要向该组添加成员: 1 以机箱管理员权限登录到主机箱。 2 在树中选择主机箱。 3 单击设置 > 组管理。 4 在组管理下的主机名/IP 地址字段中输入成员的 IP 地址或 DNS 名称。 5 在用户名字段中,输入具有该成员机箱的机箱管理员权限的用户名。 6 在密码字段中键入相应的密码。 7 可选地,选择 Sync New Member with Leader Propert
3 4 单击设置 > 组管理。 在机箱组页中的角色下,选择无,然后单击应用。 主机箱随后会与已从组中移除的所有成员通信。现在,可以将该主机箱分配为新组的主机箱或成员。 如果因为网络问题导致主机箱与成员之间无法联系,则成员机箱可能无法收到消息。在这种情况下,从成员机箱禁用该成员即可 完成移除过程。 在成员机箱中禁用单个成员 有时,无法通过主机箱从组中移除成员。如果与该成员的网络连接丢失,则可能会发生此情况。要在成员机箱上从组中移除成员: 1 以机箱管理员权限登录到成员机箱。 2 在左侧窗格中,单击机箱概览 > 设置 > 组管理。 3 选择无,然后单击应用。 访问成员机箱或服务器的 Web 页面 您可以访问的成员机箱的 Web 页面、服务器的远程控制台,或主机箱组页面中的 iDRAC 服务器的 Web 页面。如果成员设备有与主机 箱相同的登录凭据,您可以使用相同的凭据来访问成员设备。 注: 多个机箱管理不支持单点登录和智能卡登录。从主机箱通过单点登录访问成员需要主机箱和成员之间的通用用户名或密码。 通用用户名或密码只能与 Active Directory、本地和 LDAP 用户配合使用。 要导航到
6 单击保存。 如果选择动态变化传播,成员机箱将采用主机箱的属性。如果选择手动传播,在想要传播所选设置至成员机箱时,单击传播。有 关将主机箱属性传播至成员机箱的更多信息,请参阅联机帮助。 MCM 组的刀片资源清册 组是包含 0 到 8 个机箱组成员的主机箱。机箱组运行状况页面显示所有成员机箱,并允许您使用标准浏览器下载功能将服务器资源 清册报告保存到文件。该报告包含以下对象的数据: • 当前在所有组机箱(包括主机箱)中的所有服务器。 • 空插槽和扩展插槽(包括全高和双宽服务器模块)。 保存服务器资源清册报告 要使用 CMC Web 界面保存服务器资源清册报告,请执行以下操作: 1 在左侧窗格中,选择组。 2 在机箱组运行状况页面中,单击保存资源清册报告。将显示文件下载对话框,提示您打开或保存文件。 3 单击保存并指定服务器模块资源清册报告的路径和文件名。 注: 机箱组主机箱和机箱组成员机箱以及关联机箱中的服务器模块必须接通电源,才能获得最准确的服务器模块资源清册报 告。 导出的数据 服务器资源清册报告包含在机箱组主机箱的正常轮询期间(每 30 秒一次)由各个机箱组成员最近返回的数据。
数据字段 示例 注: 需要在服务器上运行的服务器管理员代理;否则显示为空。 操作系统 Windows Server 2008 注: 需要在服务器上运行的服务器管理员代理;否则显示为空。 型号 PowerEdgeM610 Service Tag 1PB8VF1 总系统内存 4.0 GB 注: 成员上需要 VRTX CMC 1.0 或更高版本;否则显示为空。 CPU 数量 2 注: 成员上需要 VRTX CMC 1.0 或更高版本;否则显示为空。 CPU 信息 Intel (R) Xeon (R) CPU E5502 @1.87GHzn 注: 成员上需要 VRTX CMC 1.0 或更高版本;否则显示为空。 数据格式 资源清册报告以 .CSV 文件格式生成,以便于导入各种工具,例如 Microsoft Excel。可通过在 MS Excel 中选择数据 > 自文本将资源清 册报告 .
使用 Web 界面查看所选机箱的资源清册 要使用 CMC Web 界面查看所选机箱的资源清册,请执行以下操作: 1 在系统树中,选择组。单击属性 > 固件版本。 机箱组固件版本页面将显示组中的所有机箱。 2 在选择机箱部分,选择您要查看其资源清册的成员机箱。 固件视图筛选器部分将显示所选机箱的服务器资源清册和所有服务器组件的固件版本。 使用 Web 界面查看所选服务器组件的固件版本 要使用 CMC Web 界面查看所选服务器组件的固件版本,执行以下操作: 1 在左侧窗格中,选择组。单击属性 > 固件版本。 机箱组固件版本页面将显示组中的所有机箱。 2 在选择机箱部分,选择您要查看其资源清册的成员机箱。 3 在固件视图筛选器部分,选择组件。 4 在组件列表中,选择您要查看其固件版本的所需组件:BIOS、iDRAC、CPLD、USC、诊断程序、操作系统驱动程序、RAID 设备 (最多 2 个)和 NIC 设备(最多 6 个)。 将显示所选成员机箱中所有服务器的所选组件的固件版本。 机箱配置配置文件 利用机箱配置配置文件功能,可以使用存储在网络共享或本地管理站中的机箱配置配置文件来配置机箱,
注: 在保存当前机箱配置时,支持标准 ASCII 扩展字符集。但不支持下列特殊字符: “、.、*、>、<、\、/、:、和 | 2 从配置文件类型选项中选择下面的一种配置文件类型: • 替换 - 包含整个 CMC 配置的属性,但用户密码和服务标签等只写属性除外。此类配置文件用作备份配置文件,用于还原包 括标识信息(例如 IP 地址)在内的完整机箱配置。 克隆 - 包含所有替换类型的配置文件属性。出于安全原因,不包含 MAC 地址、IP 地址等标识属性。此类配置文件用于克隆 新机箱。 从配置文件位置下拉菜单中选择下面的一个位置用于存储配置文件: • 3 4 • 本地 - 将配置文件保存至本地管理站。 • 网络共享 - 将配置文件保存在某个共享位置。 单击保存以将配置文件保存至选定位置。 操作完成后,会显示 Operation Successful 消息: 注: 要查看已保存至 XML 文件的设置,请在存储的配置文件部分选择保存的配置文件,然后单击查看配置文件列中的查 看。 还原机箱配置配置文件 通过导入本地管理站或保存机箱配置所在的网络共享中的备份文件(.xml 或 .
3 单击确定,对机箱应用该配置文件。 导出机箱配置配置文件 您可以将保存在网络共享中的机箱配置配置文件导出至管理站上的指定路径。 要导出存储的配置文件,请执行以下任务: 1 转至机箱配置配置文件页面。在机箱配置配置文件 > 存储的配置文件 部分中,选择所需的配置文件,然后单击导出配置文件副 本。 随即会显示文件下载消息,询问您打开还是保存文件。 2 单击保存或打开以导出配置文件至所需的位置。 编辑机箱配置配置文件 您可以编辑机箱的机箱配置配置文件名称。 要编辑机箱配置配置文件名称,请执行以下任务: 1 转至机箱配置配置文件页面。在机箱配置配置文件 > 存储的配置文件部分中,选择所需的配置文件,然后单击编辑配置文件。 随后将显示编辑配置文件窗口。 2 在配置文件名称字段输入所需的配置文件名称,然后单击编辑配置文件。 随后将显示 Operation Successful 消息。 3 单击确定。 删除机箱配置配置文件 您可以删除存储在网络共享中的机箱配置配置文件。 要删除机箱配置配置文件,请执行以下任务: 1 转至机箱配置配置文件页面。在机箱配置配置文件 > 存储的配置文件部分,选择所需的
3 使用简单文本编辑器(可选)修改配置文件。配置文件中的任何特殊格式字符都可能损坏 RACADM 数据库。 4 使用新创建的配置文件修改目标 CMC。在命令提示符处,键入: racadm config -f myfile.cfg 5 重设已配置的目标 RAC。在命令提示符处键入: racadm reset getconfig -f myfile.cfg 子命令为活动 CMC 请求 CMC 配置并生成 myfile.cfg 文件。如果需要,可以将文件重命名或将其 保存到另一个位置。 可以运行 getconfig 命令来执行以下操作: • 显示组中的所有配置属性(用组名称和索引指定)。 • 按用户名显示用户的所有配置属性。 config 子命令将信息载入其他 CMC。Server Administrator 使用 config 命令同步用户和密码数据库。 创建 CMC 配置文件 CMC 配置文件 <文件名>.cfg 与 racadm config -f .cfg 命令配合使用以创建简单文本文件。该命令允许您构建配 置文件(类似于 .
分析规则 • 以井号 (#) 开始的行将视为注释。 注释行必须从第一列开始。所有其他列中的“#”字符均只被视为 # 字符。 一些调制解调器参数可能在其字符串中包含 # 字符。不需要转义字符。您可能想要生成 .cfg(从 racadm getconfig -f .cfg 命令),然后对另一个 CMC 执行 racadm config -f .
– cfgStandardSchema - cfgSSADRoleGroupName – cfgServerInfo - cfgServerBmcMacAddress 修改 CMC IP 地址 在配置文件中修改 CMC IP 地址时,移除所有不必要的 = 条目。只有实际变量组标签带有 [ 和 ] 的保持不 变,包括与 IP 地址更改有关的两个 = 条目。 示例: # # Object Group "cfgLanNetworking" # [cfgLanNetworking] cfgNicIpAddress=10.35.10.110 cfgNicGateway=10.35.10.1 此文件更新如下: # # Object Group "cfgLanNetworking" # [cfgLanNetworking] cfgNicIpAddress=10.35.9.143 # comment, the rest of this line is ignored cfgNicGateway=10.35.9.
1 要将机箱配置配置文件作为 clone.xml 文件导出至 CIFS 网络共享,请键入以下命令: racadm –r xx.xx.xx.xx –u USERNAMECMC –p PASSWORDCMC get –f clone.xml –t xml –l //xx.xx.xx.xx/ PATH –u USERNAME –p PASSWORD 2 要将机箱配置配置文件作为 clone.xml 文件导出至 NFS 网络共享,请键入以下命令: racadm –r xx.xx.xx.xx –u USERNAMECMC –p PASSWORDCMC get –f clone.xml –t xml –l xx.xx.xx.xx:/ PATH 您可以通过远程 RACADM 界面将机箱配置配置文件导出至本地管理站。 1 要将机箱配置配置文件作为 clone.xml 文件导出,请键入以下命令: racadm –r xx.xx.xx.xx –u USERNAMECMC –p PASSWORDCMC get –f clone.
dependency, destructive nature, preserving server identity or for security reasons.--> 00000 ….
7 配置服务器 可以配置服务器的以下设置: • 插槽名称 • iDRAC 网络设置 • DRAC 虚拟 LAN 标签设置 • 第一引导设备 • 服务器 FlexAddress • 远程文件共享 • 使用服务器克隆的 BIOS 设置 主题: • 配置插槽名称 • 配置 iDRAC 网络设置 • 配置 iDRAC 虚拟 LAN 标签设置 • 设置第一引导设备 • 配置服务器 FlexAddress • 配置远程文件共享 • 使用服务器配置复制功能配置配置文件设置 配置插槽名称 插槽名称用于标识单个服务器。选择插槽名称时,以下规则适用: • 名称仅能包含最多 24 个非扩展的 ASCII 字符(ASCII 代码 32 到 126)。名称中还允许使用标准字符及特殊字符。 • 插槽名称必须在机箱内唯一。插槽不能具有相同的名称。 • 字符串不区分大小写。Server-1、server-1 和 SERVER-1 具有相同的名称。 • 插槽名称不得使用以下字符串开头: – Switch– Fan– PS– DRAC– MC– 机箱 – Housing-Le
Web 界面中的插槽名称设置仅保存在 CMC 中。如果从机箱中卸下服务器,则服务器的插槽名称设置将不再保留。 CMC Web 界面中的插槽名称设置始终覆盖在 iDRAC 界面中对显示名称所做的任何更改。 要使用 CMC Web 界面编辑插槽名称,请执行以下操作: 1 在左侧窗格中,转至机箱概览 > 服务器概览 > 设置 > 插槽名称。 2 在插槽名称页面的插槽名称字段中编辑插槽名称。 3 要将服务器的主机名用作插槽名称,请选择使用主机名作为插槽名称选项。如果服务器的主机名(或系统名称)可用,此选项将 用该名称覆盖静态插槽名称。这要求 OMSA 代理安装在服务器上。有关 OMSA 代理的更多信息,请参阅 dell.
设置 说明 iDRAC Root 密码 选中插入服务器时设置 iDRAC Root 密码和启用 QuickDeploy 选项后,此密码值 会在服务器插入机箱时分配给服务器的 iDRAC root 用户密码。此密码可包含 1 到 20 个可打印(含空格)字符。 确认 iDRAC root 密码 允许您重新输入在密码字段中提供的密码。 启用 iDRAC LAN 启用或禁用 iDRAC LAN 信道。默认情况下,清除此选项。 启用 iDRAC IPv4 启用或禁用 iDRAC 上的 IPv4。默认情况下,选中此选项。 启用 LAN 上 iDRAC IPMI 为机箱中存在的每个 iDRAC 启用或禁用 IPMI over LAN 信道。默认情况下,选中 此选项。 启用 iDRAC IPv4 DHCP 为机箱中存在的每个 iDRAC 启用或禁用 DHCP。如果启用此选项,则字段 QuickDeploy IP、QuickDeploy 子网掩码和 QuickDeploy 网关都被禁用,并且无法 修改,因为系统使用 DHCP 自动为每个 iDRAC 分配这些设置。要选择此选项,必 须选择启用 iDR
将 QuickDeploy IP 地址分配给服务器 此处的图片显示 VRTX 机箱中有四个半高服务器时到服务器的 QuickDeploy IP 地址分配: 下图显示 VRTX 机箱中有两个全高刀片时到服务器的 QuickDeploy IP 地址分配: 修改单个服务器 iDRAC 的 iDRAC 网络设置 使用此功能可以为每台已安装的服务器配置 iDRAC 网络配置设置。每个字段显示的初始值是从 iDRAC 读取的当前值。要使用此功 能,必须具有企业版许可证。 要修改 iDRAC 网络设置,请执行以下操作: 1 在左侧窗格中,单击服务器概览,然后单击设置。在部署 iDRAC 页面的 iDRAC 网络设置部分,列出了所有已安装服务器的 iDRAC IPv4 和 IPv6 网络配置设置。 2 根据需要修改服务器的 iDRAC 网络设置。 注: 您必须选择启用 LAN 选项来指定 IPv4 或 IPv6 设置。有关这些字段的信息,请参阅联机帮助。 3 要将设置部署到 iDRAC,请单击应用 iDRAC 网络设置。对于快速部署设置做出的所有更改也会保存。 iDRAC 网络设置表反映未来的网络配置设置;为安
• cfgRemoteHosts • cfgSerial • cfgSessionManagement 有关属性默认值和范围的更多信息,请参阅 dell.
设置第一引导设备 可以为每台服务器指定 CMC 第一引导设备。该设备可能不是服务器的实际第一引导设备,甚至不代表该服务器中的设备。它代表 CMC 发送到服务器的设备,并用作它针对该服务器的第一引导设备。可以将此设备设置为默认第一引导设备或一次性引导设备,以 便引导映像来执行任务,如运行诊断程序或重新安装操作系统。 您可以仅为下次引导或为所有后续重新引导设置第一引导设备。您还可以为服务器设置第一引导设备。系统在下次和后续重新引导时 会从所选设备引导,并保持作为 BIOS 引导顺序中的第一引导设备,直到从 CMC Web 界面(机箱概览 > 服务器概览 > 设置 > 第一引 导设备)或从 BIOS 引导顺序再次更改为止。 注: CMC Web 界面中的第一引导设备设置会覆盖系统 BIOS 引导设置。 您指定的引导设备必须存在并且包含可引导介质。 可以将以下设备设置为第一引导设备。 表.
要为单个服务器设置第一引导设备,请执行以下操作: 1 在左侧窗格中,单击服务器概览,然后单击要为其设置第一引导设备的服务器。 2 转至设置 > 第一引导设备。此时将显示第一引导设备页面。 3 在第一引导设备下拉菜单中,选择要用于每个服务器的引导设备。 4 如果希望服务器每次引导时都从选定的设备引导,请清除该服务器对应的引导一次选项。如果要服务器仅在下一引导周期从选定 的设备引导,请选中该服务器对应的引导一次选项。 5 单击应用保存设置。 使用 RACADM 设置第一引导设备 要设置第一引导设备,请使用 cfgServerFirstBootDevice 对象。 要启用为设备引导一次,请使用 cfgServerBootOnce 对象。 有关这些对象的更多信息,请参阅 dell.
使用服务器配置复制功能配置配置文件设置 服务器配置复制功能允许您将指定服务器的所有配置文件设置应用于一个或多个服务器。可以复制的配置文件设置是那些可以修改并 且可以跨服务器复制的配置文件设置。将显示并且可以复制服务器的以下三个配置文件组: • BIOS - 该组仅包含服务器的 BIOS 设置。这些配置文件从适用于 PowerEdge VRTX 的 CMC 版本 1.00 和更高版本生成。 • BIOS 和引导 - 该组包含服务器的 BIOS 和引导设置。这些配置文件从适用于 PowerEdge VRTX 的 CMC 版本 1.00 和更高版本生 成。 • 所有设置 - 此版本包含服务器以及该服务器上组件的所有设置。这些配置文件从以下各项生成 – 适用于 PowerEdge VRTX 的 CMC 版本 1.00 和更高版本 – 具有 iDRAC7 1.00.00 或更高版本以及 Lifecycle Controller 2 版本 1.1 或更高版本的第 12 代服务器 – 具有 iDRAC8 以及 Lifecycle Controller 2.00.00.
要添加或保存配置文件: 1 打开服务器配置文件页面。在服务器配置文件部分中,单击应用并保存配置文件。 2 选择您要从其设置生成配置文件的服务器,然后单击保存配置文件。 此时将显示保存配置文件部分。 3 选择扩展存储或网络共享作为保存配置文件的位置。 注: 仅当网络共享已安装且可访问时,网络共享选项启用并在存储的配置文件部分中显示详细信息。如果网络共享未连接, 则配置机箱的网络共享。要配置网络共享,请单击存储的配置文件部分中的编辑。有关配置网络共享的更多信息,请参阅使 用 CMC Web 界面配置网络共享。 4 在配置文件名称和说明字段中,输入配置文件名称和说明(可选),然后单击保存配置文件。 注: 保存服务器配置文件时,支持标准 ASCII 扩展字符集。但不支持以下特殊字符: )、“、.、*、>、<、\、/、:、|、#、? 和 , CMC 与 LC 通信以获取可用的服务器配置文件设置,并将它们存储为指定的配置文件。 进度指示器表示“保存”操作正在进行中。完成该操作后,会显示一条“操作成功”的消息。 注: 收集设置的进程在后台运行。因此,新配置文件可能需要过一段时间才能显示。如果不显示新配置文件,
要从 CMC 导入存储的配置文件: 1 在服务器配置文件页面上存储的配置文件部分中,单击导入配置文件。 将显示导入服务器配置文件部分。 2 单击浏览从所需的位置访问该配置文件,然后单击导入配置文件。 有关各字段的更多信息,请参阅联机帮助。 导出配置文件 您可以将存储的服务器配置文件导出到管理站中指定的文件夹路径。 要导出存储的配置文件: 1 转至服务器配置文件页面。在存储的配置文件部分中,选择所需的配置文件,然后单击导出配置文件副本。 随即会显示文件下载消息,询问您打开还是保存文件。 2 单击保存或打开以导出配置文件至所需的位置。 注: 如果源配置文件位于 SD 卡中,将显示一条消息,表明如果导出配置文件则说明将会丢失。按确定继续导出配置文件。 此时将显示一条消息,提示您选择文件的目标: • 本地或网络共享(如果源文件位于 SD 卡上)。 注: 仅当网络共享已安装且可访问时,网络共享选项启用并在存储的配置文件部分中显示详细信息。如果网络共享未连 接,则配置机箱的网络共享。要配置网络共享,请单击存储的配置文件部分中的编辑。有关更多信息,请参阅使用 CMC Web 界面配置网络共享。 • 本地
删除配置文件 您可以删除 CMC 非易失性介质(SD 卡)上或网络共享上存储的服务器配置文件。 要删除存储的配置文件: 1 在服务器配置文件页面上存储的配置文件部分中,选择所需的配置文件,然后单击删除配置文件。 随即显示一条警告消息表明删除配置文件操作将永久性地删除选定的配置文件。 2 单击确定以删除所选的配置文件。 有关更多信息,请参阅联机帮助。 查看配置文件设置 要查看选定服务器的配置文件设置,请转至服务器配置文件页面。在服务器配置文件部分,单击所需服务器的服务器配置文件列中的 查看。此时将显示查看设置页面。 有关所显示设置的更多信息,请参阅联机帮助。 注: 只有重新启动时收集系统资源清册 (CSIOR) 选项启用时,CMC 服务器配置复制功能才会检索并显示特定服务器的设置。 要在下列服务器上启用 CSIOR,请执行以下操作: • 第 12 代服务器 - 在重新启动服务器后,当显示公司徽标时,选择 F2 键。在 iDRAC 设置页面的左侧窗格中,单击 Lifecycle Controller,然后单击 CSIOR 以启用更改。 • 第 13 代服务器 - 在重新启动服务器后,当出现提示时,按
显示的完成或失败的结果类似于特定服务器 iDRAC Lifecycle Controller 日志中显示的信息。 配置文件的 Quick Deploy 快速部署功能使您能够将存储的配置文件分配到服务器插槽。支持服务器配置复制的任何服务器插入插槽后即使用分配给该插槽的配 置文件配置。仅当部署 iDRAC 页面中的插入服务器时的操作选项设置为服务器配置文件选项或快速部署和服务器配置文件选项时, 才能执行快速部署操作。选择此选项可以在将新服务器插入机箱时应用分配的服务器配置文件。要转至部署 iDRAC 页面,请选择服 务器概览 > 设置 > iDRAC。要设置配置文件以进行快速部署,则必须有机箱管理员权限。 注: 将服务器配置文件分配给插槽 在服务器配置文件页面上可以将服务器配置文件分配给插槽。要将配置文件分配给机箱插槽,请执行以下操作: 1 在服务器配置文件页面中,单击用于快速部署的配置文件。 在分配配置文件列中包含的选择框中,将显示插槽的当前配置文件分配。 注: 仅当部署 iDRAC 页面中的插入服务器时的操作选项设置为服务器配置文件或快速部署然后应用服务器配置文件时,才能 执行快速部署操作。选择此选项可
备用服务器,这样便可以使用故障服务器的操作系统和应用程序进行引导。这项功能的主要优点在于使用了唯一的且在所有机箱之间 共享的虚拟 MAC 地址池。 在服务器停止工作时,借助这项功能可以联机管理服务器操作,无需物理干预。您可以使用引导标识配置文件功能来执行以下任务: • 初始设置 – 创建虚拟 MAC 地址范围。要创建 MAC 地址,您必须具有机箱配置管理员和服务器管理员权限。 – 保存引导标识配置文件模板,编辑各服务器使用的 SAN 引导参数并将这些参数包含进来,即可对网络共享中的引导标识配置 文件进行自定义。 – 在应用引导标识配置文件前,先对使用初始配置的服务器进行准备。 – 对每台服务器应用引导标识配置文件,并从 SAN 进行引导。 • 配置一台或多台备用待机服务器以实现快速恢复。 – 在应用引导标识配置文件前,先对使用初始配置的待机服务器进行准备。 • 通过执行以下任务,可在新服务器中使用故障服务器的工作负载: – 清除故障服务器的引导标识,以避免服务器恢复时复制 MAC 地址。 – 将故障服务器的引导标识应用于备用待机服务器。 – 使用新引导标识设置引导服务器以实现快速恢复工作负载。 保
应用引导标识配置文件 如果引导标识配置文件作为网络共享中的存储配置文件提供,您可以应用引导标识配置文件设置。要启动引导标识配置操作,您可以 将存储的配置文件应用到一个服务器。 注: 如果服务器不支持 Lifecycle Controller 或机箱的电源已关闭,则不能将配置文件应用于服务器。 要对服务器应用配置文件,请执行以下任务: 1 转至 Server Profiles(服务器配置文件)页面。在 Boot Identity Profiles(引导标识配置文件)部分,选择要在其中应用所选配 置文件的服务器。 选择配置文件下拉菜单此时被启用。 注: 选择配置文件下拉菜单中显示了网络共享中所有可用的配置文件,这些配置文件按类型排序。 2 从选择配置文件下拉菜单中,选择您要应用的配置文件。 应用标识选项将处于启用状态。 3 单击应用标识。 屏幕上会显示一条警告消息,指示应用新标识会覆盖当前设置并重新引导所选服务器。系统会提示您确认是否继续执行此操作。 注: 要在服务器上执行服务器配置复制操作,必须为服务器启用 CSIOR 选项。如果已禁用 CSIOR 选项,会显示警告消息指 示服务器未启用 CSIOR。
要将存储的配置文件从管理站导入到网络共享,请执行以下任务: 1 转至服务器配置文件页面。在引导标识配置文件 > 存储的配置文件部分,单击导入配置文件。 随即会显示导入配置文件部分。 2 单击浏览从所需的位置访问该配置文件,然后单击导入配置文件。 有关更多信息,请参阅 CMC Online Help(CMC 联机帮助)。 导出引导标识配置文件 您可以将保存在网络共享上的引导标识配置文件导出至管理站上的指定路径。 要导出存储的配置文件,请执行以下任务: 1 转至服务器配置文件页面。在引导标识配置文件存储的配置文件部分,选择所需的配置文件,然后单击导出配置文件。 随即会显示文件下载消息,询问您打开还是保存文件。 2 单击保存或打开以导出配置文件至所需的位置。 删除引导标识配置文件 您可以删除存储在网络共享中的引导标识配置文件。 要删除存储的配置文件,请执行以下任务: 1 转至服务器配置文件页面。在引导标识配置文件 > 存储的配置文件部分中,选择所需的配置文件,然后单击删除配置文件。 随即显示一条警告消息,指示删除配置文件操作将永久删除选定的配置文件。 2 单击确定以删除所选的配置文件。 有关更
要创建 MAC 池: 1 转至服务器配置文件页面。在引导标识配置文件 > 管理虚拟 MAC 地址池 部分。 2 在起始 MAC 地址字段中输入 MAC 地址池的起始 MAC 地址。 3 在 MAC 地址数字段中输入 MAC 地址数。 4 单击创建 MAC 池以创建 MAC 地址池。 在网络共享中创建 MAC 地址数据库后,管理虚拟 MAC 地址池将显示该网络共享中存储的 MAC 地址的列表和状态。在此部分可 添加 MAC 地址,或从网络共享中移除 MAC 地址。 添加 MAC 地址 您可以使用 CMC Web 界面中的添加 MAC 地址选项,将 MAC 地址范围添加至网络共享。 注: 不能添加已存在于 MAC 地址池中的 MAC 地址。将显示一个错误,表示新添加的 MAC 地址已存在于池中。 要将 MAC 地址添加至网络共享: 1 转至 服务器配置文件 页面。在引导标识配置文件 > 管理虚拟 MAC 地址池部分,单击 添加 MAC 地址。 2 在起始 MAC 地址字段中输入 MAC 地址池的起始 MAC 地址。 3 在 MAC 地址数字段中输入要添加的 MAC 地址数。 有效值为 1
使用单点登录启动 iDRAC CMC 提供对机箱个别组件(例如服务器)的有限管理。为了全面管理这些单独组件,CMC 为服务器管理控制器 (iDRAC) 基于 web 的界面提供一个启动点。 用户不需要再次登录即可启动 iDRAC Web 界面,因为此功能采用单点登录。单点登录策略如下: • 拥有服务器管理权限的 CMC 用户会自动使用单点登录登录到 iDRAC。在 iDRAC 站点上,此用户会自动授予管理员权限。即便该 用户在 iDRAC 上没有帐户或该帐户没有管理员权限,这也同样适用。 • 没有服务器管理权限但在 iDRAC 上具有相同帐户的 CMC 用户会使用单点登录自动登录到 iDRAC。在 iDRAC 站点上,此用户将授 予为 iDRAC 帐户创建的权限。 • 没有服务器管理权限但在 iDRAC 上具有相同帐户的 CMC 用户无法使用单点登录自动登录到 iDRAC。单击 Launch iDRAC GUI(启 动 iDRAC GUI)后,此用户导航至 iDRAC 登录页面。 注: 此上下文中,术语“相同帐户”意味着用户拥有 iDRAC 和 CMC 的相同登录名称以及匹配密码。拥有相同登录名称而
• 支持 iDRAC7 和 iDRAC8 的服务器。 • 服务器上的 LAN 界面已启用。 • 主机系统安装有 JRE(Java Runtime Environment)6 Update 16 或更高版本。 • 主机系统上的浏览器支持弹出窗口(禁用弹出窗口阻止程序)。 也可从 iDRAC Web 界面启动远程控制台。有关更多详情,请参阅 dell.
8 配置 CMC 以发送警报 您可以针对机箱上发生的特定事件设置警报和操作。当设备或服务的状态发生更改或者检测到错误状况时,就会生成事件。如果事件 匹配某个事件筛选器,并且您已配置该筛选器来生成警报消息(电子邮件警报或 SNMP 陷阱),则系统会将警报发送到一个或多个 已配置的目标,例如电子邮件地址、IP 地址或外部服务器。 要配置 CMC 以发送警报,请执行以下操作: 1 启用机箱事件警报选项。 2 还可以根据类别或严重程度筛选警报。 3 配置电子邮件警报或 SNMP 陷阱设置。 4 启用机箱事件警报向已配置的目标发送电子邮件警报或 SNMP 陷阱。 主题: • 启用或禁用警报 • 配置警报目标 启用或禁用警报 要将警报发送到配置的目标,您必须启用全局警报选项。该属性将覆盖单个警报设置。 确保将 SNMP 或电子邮件警报目标配置为接收警报。 使用 CMC Web 界面启用或禁用警报 要启用或禁用生成警报,请执行以下操作: 1 在左侧窗格中,单击机箱概览 > 警报。 2 在机箱事件页面的机箱警报启用部分,选择启用机箱事件警报选项以启用警报,或者清除该选项以禁用警报。 3 要
注: 要应用机箱事件配置更改,您必须具有警报配置权限。 1 在左侧窗格中,单击机箱概览 > 警报。 2 在机箱事件页面的警报筛选部分,选择下列一个或多个类别: 3 • 系统运行状况 • 存储 • 配置 • 审核 • 更新 选择下列一个或多个严重性等级: • 严重 • 警告 • 通知 监测的警报部分显示基于所选类别和严重性的结果。有关此页面上的字段说明的信息,请参阅联机帮助。 4 单击应用。 使用 RACADM 设置事件警报 要设置事件警报,请运行 eventfilters 命令。有关更多信息,请参阅 dell.
该团体字符串与机箱概览 > 网络 > 服务页面上的团体字符串不同。SNMP 陷阱团体字符串是 CMC 用于以管理站为目标的出 站陷阱的团体字符串。机箱概览 > 网络 > 服务页面上的团体字符串是管理站用于查询 CMC 上 SNMP 守护程序的团体字符 串。 在已启用下,选择与目标 IP 对应的选项,以允许该 IP 地址接收陷阱。您最多可以指定 4 个 IP 地址。 • 3 单击应用保存设置。 4 要测试 IP 地址是否接收 SNMP 陷阱,请单击测试 SNMP 陷阱列中的发送。 IP 警报目标即配置完成。 使用 RACADM 配置 SNMP 陷阱警报目标 要使用 RACADM 配置 IP 警报目标,请执行以下操作: 1 打开到 CMC 的串行/Telnet/SSH 文本控制台并登录。 注: 只能为 SNMP 和电子邮件警报设置一个筛选器掩码。如果已经选择了筛选器掩码,则不要执行任务 2,而转至步骤 3。 2 启用警报生成: racadm config -g cfgAlerting -o cfgAlertingEnable 1 3 通过运行 racadm eventfilters set 命
配置电子邮件警报设置 当 CMC 检测到机箱事件时(如环境警告或组件故障),可以将它配置为向一个或多个电子邮件地址发送电子邮件警报。 配置 SMTP 电子邮件服务器以接受来自 CMC IP 地址的中继电子邮件,该功能在大多数邮件服务器上通常由于安全问题而被关闭。有 关以安全方式配置的说明,请参阅随 SMTP 服务器一起提供的说明文件。 注: 如果邮件服务器是 Microsoft Exchange Server 2007,请确保为邮件服务器配置 iDRAC 域名,以便从 iDRAC 接收电子邮件警 报。 注: 电子邮件警报支持 IPv4 和 IPv6 地址。使用 IPv6 时必须指定 DRAC DNS 域名。 如果网络中存在不时释放并更新 IP 地址租用的 SMTP 服务器,并且每次更新后得到的地址不同,则可能会因为指定的 SMTP 服务器 IP 地址发生变化而导致该属性设置在一段时间内无法工作。这种情况下,请使用 DNS 名称。 使用 CMC Web 界面配置电子邮件警报设置 要使用 Web 界面配置电子邮件警报设置,请执行以下操作: 1 在左侧窗格中,单击机箱概览 > 警报 > 电子邮件警报设置。 2
其中 是接收电子邮件警报的个人或组的名称, 是在步骤 4 和步骤 5 中指定的索引值。电子邮件名称 最多可包含 32 个字母数字字符、连字符、下划线和句点。空格无效。 7 设置 SMTP 主机: racadm config -g cfgRemoteHosts -o cfgRhostsSmtpServerIpAddr host.domain 其中 host.domain 是 FQDN。 最多可配置 4 个目标电子邮件地址以接收电子邮件警报。要添加更多电子邮件地址,请执行步骤 2 到步骤 6 中的任务。 注: 步骤 2-6 中的命令会覆盖为所指定索引 (1-4) 配置的任何现有设置。要确定某索引以前是否配置过值,请键入:racadm getconfig -g cfgEmailAlert -i 。如果已配置该索引,则会显示 cfgEmailAlertAddress 和 cfgEmailAlertEmailName 对象的值。 有关更多信息,请参阅 dell.
9 配置用户帐户和权限 您可以设置具有特定权限(基于角色的授权)的用户帐户以使用 CMC 管理系统和维护系统安全。默认情况下,CMC 配置了本地管 理员帐户。此默认用户名为 root,密码为 calvin。作为管理员,您可以设置用户帐户,以允许其他用户访问 CMC。 您最多可以设置 16 个本地用户,或使用目录服务(例如 Microsoft Active Directory 或 LDAP)设置附加用户帐户。使用目录服务可提 供一个集中的位置来管理授权的用户帐户。 CMC 支持基于角色访问具有一组相关权限的用户。角色包括管理员、操作员、只读用户或无角色。角色定义可用的最大权限。 主题: • 用户的类型 • 修改根用户管理员帐户设置 • 配置本地用户 • 配置 Active Directory 用户 • 配置通用 LDAP 用户 用户的类型 用户有两种类型: • CMC 用户和机箱用户 • iDRAC 用户或服务器用户(自 iDRAC 驻留在服务器上后) CMC 和 iDRAC 用户可以是本地用户或 Directory 服务用户。 除 CMC 用户拥有服务器管理员权限,授予 CMC
权限 说明 • 与机箱相关的数据,例如插槽名称和插槽优先级。尽管这些属性适用于服务器,但是严格地说,它们 是与插槽相关的机箱属性而不是服务器本身的属性。因此,不管插槽中有无服务器,都可以添加或更 改插槽名称和插槽优先级。 将服务器移至不同机箱中时,它将继承新机箱中所占用插槽的插槽名称和所分配的插槽优先级。之前的 插槽名称和优先级将保留在之前的机箱中。 注: 具有机箱配置管理员权限的 CMC 用户可配置电源设置。但是,需要机箱控制管理员权限才能 执行机箱电源操作,包括开机、关机和重启。 用户配置管理员 用户可以: • 添加新用户。 • 更改用户的密码。 • 更改用户的权限。 • 启用或禁用某个用户的登录权限,但保留该用户在数据库中的名称和其他权限。 清除日志管理员 用户可清除硬件日志和 CMC 日志。 机箱控制管理员(电源 命令) 具有机箱电源管理员权限的 CMC 用户可执行所有电源相关的操作。他们可以控制机箱电源操作,包括开 机、关机和重启。 注: 要配置电源设置,需要机箱配置管理员权限。 服务器管理员 这是一种全面的权限,赋予 CMC 用户在机箱中的所有服务器上执行任何操作
权限 说明 • 关闭电源 • 打开电源后再关闭电源 • 正常关机 • 服务器重新引导 测试警报用户 用户可发送测试警报消息。 调试命令管理员 用户可执行系统诊断命令。 结构 A 管理员 用户可设置和配置结构 A IOM。 结构 B 管理员 用户可设置和配置结构 B,它对应于服务器中的第一个夹层卡,并且连接到主板上的共享 PCIe 子系统中 的结构 B 电路。 结构 C 管理员 用户可设置和配置结构 C,它对应于服务器中的第二个夹层卡,并且连接到主板上的共享 PCIe 子系统中 的结构 C 电路。 CMC 用户组提供具有预分配用户权限的一系列用户组。 注: 如果选择“管理员”、“高级用户”或“来宾用户”,然后从预定义设置中添加或删除权限,则 CMC 组会自动更改为自定 义。 表.
用户组 权限分配 • 无 结构 A 管理员 没有分配权限 表.
3 启用用户 ID 并指定用户名、密码和该用户的访问权限。有关选项的更多信息,请参阅联机帮助。 4 单击应用。即会创建具有相应权限的用户。 使用 RACADM 配置本地用户 注: 必须以 root 用户登录才能在远程 Linux 系统上执行 RACADM 命令。 最多可以在 CMC 属性数据库中配置 16 个用户。手动启用 CMC 用户前,请验证当前用户是否存在。 如果配置新 CMC 或使用了 racadm racresetcfg 命令,则当前唯一用户为 root,密码为 calvin。racresetcfg 子命令将所有 配置参数重设为默认值。之前的所有更改将丢失。 注: 可以随时启用和禁用用户,并且禁用用户不会从数据库中删除该用户。 要验证某个用户是否存在,请打开到 CMC 的 Telnet/SSH 文本控制台,登录,然后为 1-16 的每个索引键入以下命令一次: racadm getconfig -g cfgUserAdmin -i 注: 您还可以键入 racadm getconfig -f ,查看或编辑 myfile.
注: 有关特定用户权限的有效位掩码值的列表,请参阅 Chassis Management Controller for PowerEdge VRTX RACADM Command Line Reference Guide(Chassis Management Controller for PowerEdge VRTX RACADM 命令行参考指南)。默认权 限值为 0,这表明用户没有启用权限。 要验证是否成功地为用户添加了正确的权限,请运行以下命令: racadm getconfig –g cfgUserAdmin –i 2 有关 RACADM 命令的更多信息,请参阅 dell.
• 扩展架构解决方案,拥有 Dell 提供的自定义 Active Directory 对象。所有访问控制对象都在 Active Directory 中维护。它为在具有各 种权限级别的不同 CMC 上配置用户访问权限提供了最大的灵活性。 标准架构 Active Directory 概览 如下图所示,为 Active Directory 集成使用标准架构需要在 Active Directory 和 CMC 上都进行配置。 在 Active Directory 中,标准组对象用作角色组。具有 CMC 访问权限的用户属于角色组的成员。要为此用户分配访问特定 CMC 卡的 权限,需要在特定 CMC 卡上配置角色组名称及其域名。角色及权限级别在每个 CMC 卡(而不是 Active Directory 中)上进行定义。 在每个 CMC 中,您最多可以配置五个角色组。下表显示了默认角色组的权限。 表.
使用 CMC Web 界面配置具有标准架构的 Active Directory 注: 有关各字段的信息,请参阅 CMC Online Help(CMC 联机帮助)。 1 在左侧窗格中,转至机箱概览,然后单击用户验证 > 目录服务。此时将显示目录服务页面。 2 选择 Microsoft Active Directory(标准架构)。要为标准架构配置的设置显示在同一页上。 3 在常见设置部分下,指定以下各项: • 选择启用 Active Directory 并在 AD 超时字段中为 Active Directory 输入超时值。 • 要从 DNS 查找中获得 Active Directory 域控制器,可选择使用 DNS 查找域控制器,然后选择以下选项之一: – 登录的用户域 - 可使用登录用户的域名执行 DNS 查找。 – 指定一个域 - 输入要用于 DNS 查找的域名。 • 4 要启用 CMC 以使用指定的 Active Directory 域控制器服务器地址,请选择指定域控制器地址。这些服务器地址是用户帐户和 角色组所在的域控制器的地址。 单击应用保存设置。 注: 您必须先应用设置才能
racadm config -g cfgActiveDirectory -o cfgADDomainController2 racadm config -g cfgActiveDirectory -o cfgADDomainController3 注: 输入域控制器的 FQDN,而不是域的 FQDN。例如,输入 servername.dell.com 而不是 dell.
• RAC LinkID 范围:12070 至 12079 架构扩展概览 Dell 已扩展架构以包括关联、设备和权限属性。关联属性用于将用户或组与一组特定的权限一起链接到一个或多个 RAC 设备。此模 型为网络上有各种用户、RAC 权限和 RAC 设备组合的管理员提供了最大的灵活性,而无需繁琐操作。 当要与 Active Directory 集成以进行验证和授权的网络上有两个 CMC 时,为其中每个 CMC 创建至少一个“关联”对象和一个“RAC 设备”对象。可以创建多个“关联”对象,每个“关联”对象都可以链接到所需的任意多个用户、用户组或“RAC 设备”对象。用 户和 RAC 设备对象可以是企业任何域中的成员。 不过,每个“关联”对象只能链接(或者可能链接用户、用户组或“RAC 设备”对象)到一个“权限”对象。此示例允许管理员控 制特定 CMC 上的每个用户权限。 RAC 设备对象就是到 RAC 固件的链接,用于查询 Active Directory 以进行验证和授权。将 RAC 添加到网络后,管理员必须使用 Active Directory 名称配置 RAC 及其设备对象,以便用户可以使用 Activ
配置扩展架构 Active Directory 要配置 Active Directory 以访问 CMC,请执行以下操作: 1 扩展 Active Directory 架构。 2 扩展 Active Directory 用户和计算机管理单元。 3 将 CMC 用户及其权限添加到 Active Directory。 4 在各个域控制器上启用 SSL。 5 使用 CMC Web 界面或 RACADM 配置 CMC Active Directory 属性。 扩展 Active Directory 架构 通过扩展您的 Active Directory 架构,可向 Active Directory 架构添加 Dell 组织单元、架构类和属性,以及示例权限与关联对象。在您 扩展架构之前,确保您对域目录林的架构主机灵活单主机操作 (FSMO) 角色拥有者具有架构管理员权限。 可使用以下任一方法扩展架构: • Dell Schema Extender 公用程序 • LDIF 脚本文件 如果使用 LDIF 脚本文件,则不会将 Dell 组织单元添加到架构中。 LDIF 文件和 Dell Schema
类和属性 表. 24: 添加到 Active Directory 架构中类的类定义 类名称 分配的对象标识号 (OID) delliDRACDevice 1.2.840.113556.1.8000.1280.1.7.1.1 delliDRACAssociation 1.2.840.113556.1.8000.1280.1.7.1.2 dellRAC4Privileges 1.2.840.113556.1.8000.1280.1.1.1.3 dellPrivileges 1.2.840.113556.1.8000.1280.1.1.1.4 dellProduct 1.2.840.113556.1.8000.1280.1.1.1.5 表. 25: dellRacDevice 类 OID 1.2.840.113556.1.8000.1280.1.7.1.
OID 1.2.840.113556.1.8000.1280.1.1.1.3 dellIsServerResetUser dellIsTestAlertUser dellIsDebugCommandAdmin dellPermissionMask1 dellPermissionMask2 表. 28: dellPrivileges 类 OID 1.2.840.113556.1.8000.1280.1.1.1.4 说明 用作 Dell 权限(授权权限)的容器类。 类的类型 结构类 超类 用户 属性 dellRAC4Privileges 表. 29: dellProduct 类 OID 1.2.840.113556.1.8000.1280.1.1.1.5 说明 所有 Dell 产品派生所依据的主类。 类的类型 结构类 超类 计算机 属性 dellAssociationMembers 表.
分配的 OID/语法对象标识符 单值 OID:1.2.840.113556.1.8000.1280.1.1.2.4 布尔值 (LDAPTYPE_BOOLEAN 1.3.6.1.4.1.1466.115.121.1.7) 属性:dellIsLoginUser TRUE 说明:如果用户具有设备的登录权限,则为 TRUE。 OID:1.2.840.113556.1.8000.1280.1.1.2.3 布尔值 (LDAPTYPE_BOOLEAN 1.3.6.1.4.1.1466.115.121.1.7) 属性:dellIsUserConfigAdmin TRUE 说明:如果用户具有设备的用户配置管理员权限,则为 TRUE。 OID:1.2.840.113556.1.8000.1280.1.1.2.5 布尔值 (LDAPTYPE_BOOLEAN 1.3.6.1.4.1.1466.115.121.1.7) 属性:delIsLogClearAdmin TRUE 说明:如果用户具有设备的清除日志管理员权限,则为 TRUE。 OID:1.2.840.113556.1.8000.1280.1.1.2.
分配的 OID/语法对象标识符 单值 说明:此属性是 dellRacDevice 对象的当前 Rac 类型和指向 dellAssociationObjectMembers 正向链接的反向链接。 OID:1.2.840.113556.1.8000.1280.1.1.2.13 忽略大小写字符串 (LDAPTYPE_CASEIGNORESTRING 1.2.840.113556.1.4.905) FALSE 属性:dellAssociationMembers 属性:属于此产品的 dellAssociationObjectMembers 的列表。此属性是指向 dellProductMembers 链接属性的反向链 接。 链接 ID:12071 OID:1.2.840.113556.1.8000.1280.1.1.2.14 可分辨名称 (LDAPTYPE_DN 1.3.6.1.4.1.1466.115.121.1.12) 属性:dellPermissionsMask1 OID:1.2.840.113556.1.8000.1280.1.6.2.
4 选择 RAC 设备对象,然后单击确定。 创建权限对象 要创建权限对象: 注: 您必须在相关关联对象的同一个域中创建权限对象。 1 在 MMC 控制台根目录窗口中,右键单击一个容器。 2 选择新建 > Dell 高级远程管理对象。 3 在新建对象页面中,键入新对象的名称。 4 选择权限对象,然后单击确定。 5 右键单击已创建的权限对象,然后选择属性。 6 单击 RAC 权限选项卡并为用户或组分配权限。有关 CMC 用户权限的更多信息,请参阅用户类型。 创建关联对象 关联对象从组派生而来,必须包含组类型。关联范围指定关联对象的安全组类型。创建关联对象时,必须选择适用于要添加的对象类 型的关联范围。例如:如果选择“通用”,则关联对象只有在 Active Directory 域以本机模式或更高模式运行时才可用。 要创建关联对象,请执行以下操作: 1 在控制台根目录 (MMC) 窗口中,右键单击一个容器。 2 选择新建 > Dell 高级远程管理对象。 3 在新建对象页面中,键入新对象的名称,然后选择关联对象。 4 选择关联对象的范围,然后单击确定。 将对象添加到关联对象
添加 RAC 设备或 RAC 设备组 要添加 RAC 设备或 RAC 设备组,请执行以下操作: 1 选择产品选项卡并单击添加。 2 输入 RAC 设备或 RAC 设备组名称并单击确定。 3 在属性窗口中,依次单击应用、确定。 单击产品选项卡将一个或多个 RAC 设备添加到关联设备。关联设备指定连接到网络的 RAC 设备,这些设备对于所定义的用户或 用户组可用。可以将多个 RAC 设备添加到关联对象。 使用 CMC Web 界面配置具有扩展架构的 Active Directory 要使用 CMC Web 界面配置具有扩展架构的 Active Directory,请执行以下操作: 注: 有关各字段的信息,请参阅联机帮助。 1 在左侧窗格中,单击机箱概览 > 用户验证 > 机箱概览 > 目录服务。 2 选择 Microsoft Active Directory(扩展架构)。 要配置的扩展架构设置将显示在同一个页面上。 3 在常见设置部分下,指定以下各项: • 选择启用 Active Directory 并在 AD 超时字段中为 Active Directory 输入超时值。 • 要从 D
具有扩展架构的 Active Directory 设置已配置完成。 使用 RACADM 配置具有扩展架构的 Active Directory 要使用 RACADM 命令配置具有扩展架构的 CMC Active Directory,请打开命令提示符,然后在命令提示符处输入以下命令: racadm config -g cfgActiveDirectory -o cfgADEnable 1 racadm config -g cfgActiveDirectory -o cfgADType 1 racadm config -g cfgActiveDirectory -o cfgADRacName racadm config -g cfgActiveDirectory -o cfgADRacDomain < fully qualified rac domain name > racadm config -g cfgActiveDirectory -o cfgADDomainController1 < fully qualified domain name or IP Address
LDAP 用户验证 一些目录服务器要求在特定 LDAP 服务器上进行任何搜索前完成绑定。 要验证用户,请执行以下操作: 1 可选绑定到目录服务。默认为匿名绑定。 注: 基于 Windows 的目录服务器不允许匿名登录。因此,输入绑定 DN 名称和密码。 2 根据用户登录搜索用户。默认属性是 uid。如果找到一个以上的对象,则返回错误。 3 解除绑定并以用户的 DN 和密码进行绑定。如果系统无法进行绑定,则登录将会失败。 4 如果这些步骤成功完成,则用户通过验证。 LDAP 用户的授权 要对用户授权,请执行以下操作: 1 在每个已配置的组中搜索该用户在 member or uniqueMember 属性中的域名。管理员可以配置用户域。 2 对于该用户所属的每个用户组,授予该用户相应的用户访问权限和特权。 使用 CMC Web 界面配置通用 LDAP 目录服务 要配置通用 LDAP 目录服务,请执行以下操作: 注: 您必须具有机箱配置管理员权限。 1 在左侧窗格中,单击机箱概览 > 用户验证 > 目录服务。 2 选择通用 LDAP。 在同一页面上会显示可以为标准架构配置的设置。 3
7 单击应用保存角色组设置,单击退回到配置页,然后选择通用 LDAP。 8 如果您选择了启用 SSL 证书验证选项,则在管理证书部分,指定 CA 证书以在 SSL 握手期间验证 LDAP 服务器证书,然后单击 上载。证书便上载到 CMC 并会显示详细信息。 9 单击应用。 通用 LDAP 目录服务即配置完成。 使用 RACADM 配置通用 LDAP 目录服务 要配置 LDAP 目录服务,请使用 cfgLdap 和 cfgLdapRoleGroup RACADM 组中的对象。 配置 LDAP 登录有多个选项。大多数情况下部分选项可使用其默认设置。 注: 强烈建议使用 racadm testfeature -f LDAP 命令在第一次设置时测试 LDAP 设置。此功能支持 IPv4 和 IPv6。 所需属性更改包括启用 LDAP 登录、设置服务器 FQDN 或 IP 以及配置 LDAP 服务器的基础 DN。 • $ racadm config -g cfgLDAP -o cfgLDAPEnable 1 • $ racadm config -g cfgLDAP -o cfgLDAPServer 1
10 配置 CMC 进行单点登录或智能卡登录 此部分为 Active Directory 用户提供配置 CMC 进行智能卡登录和单点登录 (SSO) 的信息。 SSO 使用 Kerberos 作为验证方法,使已经登录的用户可以自动或单点登录到 Exchange 等后续应用程序。对于单点登录,CMC 使用 客户端系统的凭据,您使用有效的 Active Directory 帐户登录之后,操作系统就会缓存这些凭据。 双重验证提供了更高级别的安全性,要求用户具有密码或 PIN 以及含有私钥或数字证书的实物卡。Kerberos 使用此双重验证机制来让 系统可以证明用户的真实性。 注: 选择登录方法不会设置与诸如 SSH 等其他登录界面相关的策略属性。您还必须设置其他登录界面的其他策略属性。如果您要 禁用所有其他登录界面,请导航至服务页面并禁用所有(或某些)登录界面。 Microsoft Windows 2000、Windows XP、Windows Server 2003、Windows Vista、Windows 7 和 Windows Server 2008 可以使用 Kerberos 作为 SSO 和智能卡登录的
客户端系统 • 对于只通过智能卡的登录,客户端系统必须具有 Microsoft Visual C++ 2005 Redistributable。有关更多信息,请参阅 www.microsoft.com/downloads/details.
有关配置 CMC 以使用扩展架构 Active Directory 的信息,请参阅扩展架构 Active Directory 概览。 配置浏览器以使用 SSO 登录 Internet Explorer 版本 6.0 和更高版本及 Firefox 版本 3.
注: 有关各选项的信息,请参阅联机帮助。 1 2 在配置 Active Directory 以设置用户帐户时,请执行以下附加步骤: • 上载 Keytab 文件。 • 要启用 SSO,请选择启用单点登录选项。 • 要启用智能卡登录,请选择启用智能卡登录选项。 注: 如果选择了这两个选项,所有命令行带外接口,包括 Secure Shell (SSH)、Telnet、串行和远程 RACADM 都保持不 变。 单击应用。 将保存设置。 您可以使用 RACADM 命令测试使用 Kerberos 验证的 Active Directory: testfeature -f adkrb -u @ 其中 是有效的 Active Directory 用户帐户。 命令成功表示 CMC 能够获得 Kerberos 凭据和访问用户的 Active Directory 帐户。如果命令不成功,则解决错误并再次运行该命 令。有关更多信息,请参阅 dell.
11 配置 CMC 以使用命令行控制台 本部分提供有关 CMC 命令行控制台(或串行/Telnet/Secure Shell 控制台)功能的信息,并介绍如何设置系统以通过控制台执行系统 管理操作。有关通过命令行控制台在 CMC 中使用 RACADM 命令的信息,请参阅 Chassis Management Controller for PowerEdge VRTX RACADM Command Line Reference Guide(Chassis Management Controller for PowerEdge VRTX RACADM 命令行参考指南)。 主题: • CMC 命令行控制台功能 • 将 Telnet 控制台与 CMC 配合使用 • 配置终端仿真软件 • 使用 Connect 命令连接到服务器或输入输出模块 CMC 命令行控制台功能 CMC 支持以下串行、Telnet 和 SSH 控制台功能: • 一个串行客户端连接和最多四个并发 Telnet 客户端连接。 • 最多四个并发 Secure Shell (SSH) 客户端连接。 • RACADM 命令支持。
将 Telnet 控制台与 CMC 配合使用 一次最多可以将四个 Telnet 会话与 CMC 配合使用。 如果管理站在运行 Microsoft Windows XP 或 Microsoft Windows Server 2003,则可能会在 CMC Telnet 会话中遇到字符问题。此问题 会以冻结登录的方式发生,在这种情况下,回车键无响应并且不显示密码提示。 要解决此问题,从 support.microsoft.
表.
本节介绍使用这两个应用程序生成公共/私人密钥对的简单说明。有关这些工具的其他用法或高级用法,请参阅应用程序帮助。 要使用 PuTTY Key Generator 为运行 Windows 的客户端创建基本密钥,请执行以下操作: 1 启动应用程序,根据要生成的密钥类型(不支持 SSH-1)选择 SSH-2 RSA 或 SSH-2 DSA。 2 输入密钥的位数。请确保 RSA 密钥大小介于 1024 和 4096 之间。 注: 3 • 建议的 DSA 密钥长度为 1024。 • 如果您添加的密钥小于 1024 或大于 4096 位,CMC 可能不会显示消息,但在您尝试使用这些密钥登录时,CMC 会停止 响应。 • 对大于 2048 的 DSA 密钥,请使用以下 RACADM 命令。CMC 接受的 RSA 密钥的强度最多为 4096,但建议的密钥强度 为 1024 位。 racadm -r 192.168.8.14 -u root -p calvin sshpkauth -i svcacct -k 1 -p 0xfff -f dsa_2048.
要一次仅查看一个密钥,请将 all 替换为 1-6 中的一个数字。例如,要查看密钥 2,请键入: racadm sshpkauth –i svcacct –k 2 –v 添加公共密钥 要使用文件上载 -f 选项将公共密钥添加至 CMC,请在命令行界面控制台中输入: racadm sshpkauth –i svcacct –k 1 –p 0xfff –f 注: 只有远程 RACADM 才允许使用文件上载选项。有关更多信息,请参阅 Chassis Management Controller for PowerEdge VRTX RACADM Command Line Reference Guide(Chassis Management Controller for PowerEdge VRTX RACADM 命令行参考指 南)。 要使用文本上载选项添加公共密钥,请输入: racadm sshpkauth –i svcacct –k 1 –p 0xfff –t “” 删除公共密钥 要删除某个公共密钥,请运行以下命令: racadm sshpk
6 按 ,然后将硬件流量控制设置为是,将软件流量控制设计为否。要退出串行端口设置菜单,请按 。 7 选择调制解调器和拨号并按 。 8 在调制解调器拨号和参数设置菜单中,按 清除初始化、重设、连接和挂断设置以使它们保留为空白,然后按 保存每个空白值。 9 清除完所有指定字段后,按 退出调制解调器拨号和参数设置菜单。 10 选择从 Minicom 退出并按 。 11 在命令解释程序提示符下,键入 minicom 。 12 要退出 Minicom,请按 、、。 确保 Minicom 窗口显示一个登录提示符。如果显示登录提示符,说明连接成功。现在就可以登录和访问 CMC 命令行界面。 必需的 Minicom 设置 请参阅下表来配置任何版本的 Minicom。 表.
在 connect 命令中引用 IOM 时,IOM 将按照下表所示映射到交换机。 表.
配置 Linux 在引导期间进行服务器串行控制台重定向 以下步骤特定于 Linux GRand Unified Bootloader (GRUB)。使用不同的引导加载程序需要类似的更改。 注: 在配置客户端 VT100 仿真窗口时,将显示重定向控制台的窗口或应用程序设置为 25 行 x 80 列,以确保文本正确显示。否 则,有些文本屏幕可能会出现乱码。 按照以下说明编辑 /etc/grub.conf 文件: 1 找到文件的常规设置部分并键入以下两个新行: serial --unit=1 --speed=57600 terminal --timeout=10 serial 2 在内核行上追加两个选项: kernel console=ttyS1,57600 3 如果 /etc/grub.conf 包含 splashimage 指令,应将其注释掉。 以下示例显示了此过程中说明的更改。 # grub.
"Power Restored; Shutdown Cancelled" # Run gettys in standard runlevels co:2345:respawn:/sbin/ agetty -h -L 57600 ttyS1 ansi 1:2345:respawn:/sbin/mingetty tty1 2:2345:respawn:/sbin/mingetty tty2 3:2345:respawn:/sbin/mingetty tty3 4:2345:respawn:/sbin/mingetty tty4 5:2345:respawn:/sbin/ mingetty tty5 6:2345:respawn:/sbin/mingetty tty6 # Run xdm in runlevel 5 # xdm is now a separate service x:5:respawn:/etc/X11/prefdm -nodaemon 按照以下说明编辑文件 /etc/securetty: 添加新行,带有 COM2 的串行 tty 名称: ttyS1 以下示例显示带有新增行的示例文件。 vc/1 v
12 使用 FlexAddress 和 FlexAdress Plus 本节介绍了 FlexAddress 、FlexAddress Plus 和配置的相关信息。 注: 必须在 CMC 上安装企业版许可证才能使用 Flexaddress 功能。 主题: • 关于 FlexAddress • 配置 FlexAddress • • 查看全球通用名称或介质访问控制地址 查看 WWN 或 MAC 地址信息 • 使用 Web 界面查看基本 WWN 或 MAC 地址信息 • 使用 Web 界面查看高级 WWN 或 MAC 地址信息 • 使用 RACADM 查看 WWN 或 MAC 地址信息 • • 命令消息 FlexAddress DELL 软件许可协议 关于 FlexAddress 如果更换服务器,给定服务器插槽的插槽 FlexAddress 将保持不变。如果将服务器插入新的插槽或机箱,则使用服务器分配的 WWN/MAC,除非该机箱已为新插槽启用 FlexAddress 功能。如果卸下服务器,它将还原为服务器分配的地址。无需重新配置各结构 的部署框架、DHCP 服务器和路由器即可识别该新服
例如: (starting_mac)00188BFFDCFA + (mac_count)0xCF - 1 = (ending_mac)00188BFFDDC8 。 注: 将 SD 卡插入 USB 内存读卡器之前先锁定 SD 卡,防止意外修改任何内容。将 SD 卡插入 CMC 前应解除锁定。 关于 FlexAddress Plus FlexAddress Plus 是 2.0 版功能卡中的新增功能。它是 FlexAddress 功能卡 1.
状态消息 操作 The feature card inserted is valid and contains the following feature(s) FlexAddress: not bound.
为机箱级结构和插槽配置 FlexAddress 在机箱级别,可以启用或禁用结构和插槽的 FlexAddress 功能。基于每个结构启用 FlexAddress,然后选择参与该功能的插槽。必须同 时启用结构和插槽才能成功配置 FlexAddress。 使用 CMC Web 界面为机箱级结构和插槽配置 FlexAddress 如果插槽中有服务器,请先将其关闭,然后再在该插槽上启用 FlexAddress 功能。 要使用 CMC Web 界面启用或禁用结构和插槽以便使用 FlexAddress 功能,请执行以下操作: 1 在左侧窗格中,单击服务器概览 > 设置 > FlexAddress。 2 在部署 FlexAddress 页面的为机箱分配的 WWN/MAC 选择结构部分,选择要启用 FlexAddress 的结构类型(结构 A 或 iDRAC)。要将其禁用,请清除此选项。 3 在为机箱分配的 WWN/MAC 选择插槽页面中,为您要启用 FlexAddress 的插槽选择已启用选项。要将其禁用,请清除此选项。 注: 请注意下列事项: 4 • 如果没有选择插槽,则不会为所选结构启用 FlexAdd
注: 通过使用 racresetcfg 子命令,您可以将 CMC 的 Flex Address 重设为其出厂默认设置,即“禁用”。RACADM 语法为: racadm racresetcfg -c flex 有关 FlexAddress 相关的 RACADM 命令和其他出厂默认属性相关数据的更多信息,请参阅 dell.
在基本模式和高级模式下,WWN/MAC 地址信息均折叠显示。单击插槽的加号 看特定插槽或所有插槽的信息。 或单击 Expand/Collapse All(全部展开/折叠)查 您还可以将机箱中所有服务器的 WWN/MAC 地址信息导出到本地文件夹。 有关各字段的信息,请参阅联机帮助。 使用 Web 界面查看基本 WWN 或 MAC 地址信息 要查看机箱中每个服务器插槽或所有服务器的 WWN/MAC 地址信息,在基本模式下: 1 单击服务器概览 > 属性 > WWN/MAC 此时 WWN/MAC 摘要页面将显示 WWN/MAC 地址信息。 或者,单击服务器概览 > 插槽 > 设置 > FlexAddress 查看特定服务器插槽的 WWN/MAC 地址信息。此时将显示 FlexAddress 页。 2 在 WWN/MAC 地址表中,单击导出以本地保存 WWN/MAC 地址。 3 单击插槽的加号 出的属性。 4 从视图下拉菜单中,选择基本以查看树形视图中的 WWN/MAC 地址属性。 5 从服务器插槽下拉菜单中,选择所有服务器或特定插槽以分别查看所有服务器或仅特定插槽中服务器的 WWN
使用 RACADM 查看 WWN 或 MAC 地址信息 要使用 RACADM 查看所有服务器或特定服务器的 WWN/MAC 地址信息,请使用 getflexaddr 和 getmacaddress 子命令。 要显示整个机箱的 FlexAddress,请使用以下 RACADM 命令: racadm getflexaddr 要显示特定插槽的 FlexAddress 状态,请使用以下 RACADM 命令: racadm getflexaddr [-i ] 其中, 值为 1 至 4。 要显示 NDC 或 LOM MAC 地址,请使用以下 RACADM 命令: racadm getmacaddress 要显示机箱的 MAC 地址,请使用以下 RACADM 命令: racadm getmacaddress -m chassis 要显示所有服务器的 iSCSI MAC 地址,请使用以下 RACADM 命令: racadm getmacaddress -t iscsi 要显示特定服务器的 iSCSI MAC 地址,请使用以下 RACADM 命令: racadm getmacaddress [-m
表.
FlexAddress DELL 软件许可协议 本协议是您(用户)与 Dell Products L.P 或 Dell Global B.V.
48 C.F.R. 2.101 中的条款规定软件和文档均属于"商品",它由 48 C.F.R. 12.212 中所用的术语"商业计算机软件"和"商业计算机软件说明 文件"组成。与 48 C.F.R. 12.212 和 48 C.F.R. 227.7202-1 到 227.7202-4 一致,所有获得本软件和文档的美国政府最终用户仅具有如前所 述的权利。 签约商/制造商是 Dell Products, L.P.
13 管理结构 机箱支持一种结构类型,即结构 A。结构 A 供单个 I/O 模块使用,并且始终连接到服务器的机载以太网适配器。 机箱只包含一个 I/O 模块 (IOM),该 IOM 是直通或交换机模块。该 I/O 模块归类为组 A。 机箱 IOM 使用称为结构的独立数据路径,该结构命名为 A。结构 A 仅支持以太网。每个服务器 IO 适配器(夹层卡或 LOM)可以具 有两个或四个端口,具体取决于性能。连接到 PCIe 卡(而不是 IO 模块)的 PCIe 扩展卡占用夹层卡插槽。在部署以太网、iSCSI 或光 纤信道网络时,跨组 1 和组 2 建立冗余链路以获得最大可用性。利用结构标识符标识独立 IOM。 注: 在 CMC CLI 中,IOM 按照惯例称为 switch。 主题: • 刷新开机场景 • 监测 IOM 运行状况 • 为 IOM 配置网络设置 • 管理 IOM 的电源控制操作 • 启用或禁用 IOM 的 LED 闪烁 刷新开机场景 当机箱插入并开机时,I/O 模块的优先级高于服务器。允许 IOM 比其他服务器先开机。此时不会执行它们的结构类型验证。 IOM 开机后,服务器开机,
使用 CMC Web 界面为 IOM 配置网络设置 要为 I/O 模块配置网络设置,请执行以下操作: 1 在左侧窗格中,单击机箱概览,再单击 I/O 模块概览,然后单击设置。或者,要配置唯一可用的 I/O 模块 A 的网络设置,请单 击千兆位以太网,然后单击设置。 在配置 I/O 模块网络设置页面中,键入相应的数据,然后单击应用。 2 如果允许,请键入 IOM 的根密码、SNMP RO 团体字符串和系统日志服务器 IP 地址。有关字段说明的更多信息,请参阅联机帮 助。 注: 从 CMC 设置的 IOM IP 地址不会保存到交换机的永久启动配置中。要永久保存 IP 地址配置,必须运行 connect switch 命令或 racadm connect switch RACADM 命令,或者使用到 IOM GUI 的直接界面将该地址保存到启动配置文 件中。 注: SNMP 团体字符串的长度的 ASCII 值范围可以为 33–125 个字符。 3 单击应用。 IOM 的网络设置已配置完成。 注: 如果允许,可以将 VLAN、网络属性和 IO 端口重设为默认配置值。 使用 RACADM 为 IOM 配置网
14 管理和监测电源 PowerEdge VRTX 机箱是能效最高的模块化服务器机柜。它设计独特,包括高效率的电源设备和风扇,优化的布局使气流在系统内畅 行无阻,并且机柜中处处包含优化能效的组件。优化的硬件设计配合内置于 Chassis Management Controller (CMC)、电源设备和 iDRAC 中的先进电源管理功能,使您能够进一步提高服务器环境的能效。 PowerEdge VRTX 的电源管理功能可帮助管理员配置机柜以减少功耗,调整功率以满足环境的特定需要。 PowerEdge VRTX 模块化机柜使用交流电源,并在所有活动的内部电源设备装置 (PSU) 之间进行负载分配。该系统最多能够提供 4800 瓦的交流电源,分配给服务器模块和相关机柜基础结构。但是,该容量根据您选择的电源冗余策略而异。 PowerEdge VRTX 机柜可针对影响 PSU 行为的两种冗余策略之一进行配置,并且可以决定如何向管理员报告机箱冗余状态。 您也可以通过 OpenManage Power Center (OMPC) 控制电源管理。当 OMPC 从外部控制电源时,CMC 可继续维护: • 冗余策略 •
• 冗余状态和总体电源运行状况 • 配置电源预算和冗余 • 执行电源控制操作 • 对服务器执行电源控制操作 • 使用 CMC Web 界面对多个服务器执行电源控制操作 • 对 IOM 执行电源控制操作 冗余策略 冗余策略是一组可配置的属性,它可以确定 CMC 如何管理到机箱的电源。以下冗余策略可配置带或不带动态 PSU 接入: • 电网冗余 • 电源设备冗余 电网冗余策略 电网冗余策略的目的是使模块化机柜系统能够在可承受交流电源故障的模式下运行。这些故障可能因交流电网、布线和传输或 PSU 本身而引起。 在为系统配置电网冗余时,PSU 被划分到电网中:插槽 1 和 2 中的 PSU 位于第一个电网,而插槽 3 和 4 中的 PSU 位于第二个电网。 CMC 管理电源,使得即使任一个电网发生故障,系统仍可在不降低性能的情况下继续运行。电网冗余也可承受单个 PSU 的故障。 注: 电网冗余的作用之一是在整个电网发生故障的情况下支持服务器的无缝运行,但在两个电网的供电能力大致相等时,大多数 供电用于维持电网冗余。 注: 电网冗余仅在负载要求不超过供电能力最低的电网容量时才可实现。
注: 机柜关机时,修改模块化机柜冗余策略。 动态电源设备接入 在默认情况下,动态电源设备接入 (DPSE) 模式处于禁用状态。DPSE 可通过优化 PSU 向机箱供电的功效而节电。这样可延长 PSU 的使用寿命,减少热量产生。要使用此功能,必须具有企业版许可证。 CMC 监测总体机柜功率分配,并将 PSU 转到“待机”状态,从而通过更少的 PSU 提供机箱的总体电源分配。因为联机 PSU 以更高 利用率运行时更高效,所以在延长待机 PSU 使用寿命的同时还会提高效率。 要让其余 PSU 在最大效率下工作,请使用以下电源冗余模式: • 带有 DPSE 的 PSU 冗余模式也能提高电源效率。至少两个电源设备处于联机状态,其中一个 PSU 为配置提供电力,另一个在出 现 PSU 故障时提供冗余。“PSU 冗余”模式可以在任何一个 PSU 出现故障时提供保护,但在交流电网停工时不提供保护。 • 带有 DPSE 的电网冗余模式至少有两个 PSU 处于活动状态,每个电网中有一个。在部分负载的模块化机柜配置中,电网冗余也会 在效率和最大可用性之间取得平衡。 • 禁用 DPSE 会提供最低效率,因为全部四个电源都
小心: 在电网冗余模式中,PSU 分组必须平衡(每个电网至少有一个 PSU)。如果不满足此条件,则不能实现电网冗余。 电源设备冗余 启用电源设备冗余时,机箱中的一个 PSU 保持备用状态,从而确保任何单个 PSU 故障不会导致服务器或机箱断电。电源设备冗余模 式至少需要两个 PSU。启用 DPSE 后,如果存在额外的 PSU,会使用这些 PSU 来提高系统的电源效率。冗余丢失后,如果发生故 障,可能会导致机箱中的服务器断电。 硬件模块电源预算 CMC 提供电源预算服务,它能够为机箱配置电源预算、冗余和动态电源。 电源管理服务能够优化功耗,并根据需要将电源重新分配到不同的模块。 CMC 为机柜保持电源预算,为所有安装的服务器和组件保留所需功率。 CMC 将电源分配给机箱中的 CMC 基础结构和服务器。CMC 基础结构由机箱中的组件组成,例如风扇、I/O 模块、存储适配器、 PCIe 卡、物理磁盘和主板。机箱最多可承载 4 个服务器,这些服务器通过 iDRAC 与机箱通信。有关更多信息,请参阅 dell.
• 服务器关闭 • I/O 模块关闭 • 存储适配器、PCIe 卡、物理磁盘驱动器和主板关闭 • 机箱过渡到关闭 机箱打开或关闭时,都可以重新配置系统输入功率上限。 服务器插槽电源优先级设置 CMC 允许您为机柜中的四个服务器插槽分别设置电源优先级。优先级设置从 1(最高)到 9(最低)。这些设置被分配给机箱中的插 槽,并且插槽的优先级将被插入该插槽的任何服务器继承。CMC 基于插槽优先级将电源预算优先分配给机柜中具有最高优先级的服 务器。 根据默认服务器插槽优先级设置,电源将平均分配给所有插槽。更改插槽优先级允许管理员区分为哪些服务器优先分配电源。如果更 重要的服务器模块保持它们的默认插槽优先级为 1,并且不太重要的服务器模块更改为更低的优先级值 2 或以上,优先级为 1 的服务 器模块将首先开机。然后这些更高优先级服务器将获得最大电源分配,而可能不会为更低优先级服务器分配足够电源以便它们以最高 性能运行,甚至根本不开机,这取决于设置的系统输入功率上限有多低以及服务器电源要求。 如果管理员先手动开启低优先级服务器模块,然后开启高优先级服务器模块,则系统首先将低优先级服务器模块的电源分配下调
查看功耗状态 CMC 为整个系统提供实际输入功耗。 使用 CMC Web 界面查看功耗状态 在左侧窗格中,单击机箱概览 > 电源 > 电源监测。“电源监测”页面将显示电源运行状况、系统电源状态、实时电源统计信息和实 时能耗统计信息。有关更多信息,请参阅联机帮助。 注: 您也可以在“电源设备”下查看电源冗余状态。 使用 RACADM 查看功耗状态 要使用 RACADM 查看功耗状态,请执行以下操作: 打开到 CMC 的串行/Telnet/SSH 文本控制台,登录并键入: racadm getpminfo 交流电源恢复 如果系统的交流电源设备中断,交流电源中断之前机箱被还原到先前的电源状态。恢复到先前的电源状态是默认行为。以下因素可能 会导致中断: • 电源中断 • 电源电缆从电源设备 (PSU) 拔出 • 配电装置 (PDU) 停机 如果选择 Budget/Redundancy Configuration(预算/冗余配置) > Disable AC Power Recovery(禁用交流电恢复)选项,交流电恢 复后机箱保持关机状态。 如果刀片服务器没有配置为自动通电,则可能必须手动启动。 使
冗余状态和总体电源运行状况 冗余状态是确定总体电源运行状况的一个因素。例如,如果电源冗余策略设置为电网冗余,并且冗余状态指示系统正在运行并且有冗 余,则总体电源运行状况通常是正常。如果机箱上安装的 PSU 由于某种原因出现故障,则机箱的总体电源运行状况显示为非严重。 不过,如果在设置电网冗余下运行状况无法满足,冗余状态为否,总体电源运行状况为严重。这是因为系统无法按照配置的冗余策略 运行。 注: 将冗余策略更改为电网冗余或将电网冗余更改为冗余策略时,CMC 不会预先检查这些条件。因此,配置冗余策略可能会直接 导致冗余丢失或重新获得条件。 PSU 出现故障后的电源管理。 当发生电源不足的事件时(如 PSU 故障),CMC 将减少为服务器提供的电源设备。减少电源后,CMC 会重新评估机箱的电源需 求。如果仍然不满足电源需求,CMC 会关闭优先级较低的服务器。但是,此操作是基于您在 CMC 上设置的电源冗余策略完成的。 冗余服务器可承受电源损失,而不会影响服务器的性能。 具有较高优先级的服务器的电源逐步恢复,而电源需求会维持在电源预算内。要设置冗余策略,请参阅电源预算和冗余。 卸下 PSU 后的电源管理 当您卸
如果任一事件导致冗余丢失,则根据电源分配情况,将生成冗余丢失事件。 如果随后的电源容量或用户电源容量大于服务器分配容量,服务器的性能会降低,在最坏情况下,服务器可能会关机。在这两种情况 下都以逆优先级顺序进行,也就是优先级较低的服务器先关机。 下表介绍针对各种 PSU 冗余配置,固件对 PSU 关闭或卸下的响应。 表.
配置电源预算和冗余 可以配置整个机箱(机箱、服务器、I/O 模块、KVM、CMC 和电源设备)的电源预算、冗余和动态电源。整个机箱使用四个电源设 备装置 (PSU)。电源管理服务可优化功耗,并根据需求为不同模块重新分配电源。 您可以配置以下各项: • 系统输入功率上限 • 冗余策略 • 启用动态电源设备接入 • 禁用机箱电源按钮 • 最大节能模式 • 远程电源日志记录 • 远程电源日志记录间隔 • 基于服务器的电源管理 • 禁用交流电源恢复 节能和功率预算 当达到用户配置的最大功率限制时,CMC 开始节能。当电源需求超出用户配置的“系统输入功率上限”时,CMC 将按优先级从低到 高的顺序减少为服务器提供的功率,以便为机箱中高优先级的服务器和其他模块腾出功率。 如果机箱中所有或多个插槽配置了相同的优先级,CMC 将按照插槽编号递增的顺序减少为服务器提供的功率。例如,如果插槽 1 和 2 中的服务器具有相同的优先级,则插槽 1 中的服务器将先于插槽 2 中的服务器减少供电。 注: 可以通过指定每台服务器从 1 到 9 的编号,为机箱中每台服务器分配一个优先级。所有服务器的默认优
减少服务器功率以维持功率预算 为了让系统功耗保持在用户配置的系统输入功率上限内而需要额外功率时,CMC 将减少分配给较低优先级服务器的功率。例如,当 接入新服务器时,CMC 可能会减少低优先级服务器的功率,以便为新服务器提供更多功率。如果减少分配给较低优先级服务器的功 率之后,功率量仍然不足,CMC 会降低服务器的性能,直到为新服务器腾出足够的功率为止。 CMC 在两种情况下会减少分配给服务器的功率: • • 总体功耗超过可配置的系统输入功率上限。 在非冗余配置中出现电源故障。 PSU 在 110V 交流电源下工作 默认情况下,PSU 可在 110V 交流输入下工作。但是,不支持在 110V 和 220V 组合交流输入下工作。如果 CMC 检测到同时输入这两 种电压,则会选择其中一种电压值,并关闭连接到另一种电压电平的那些电源设备,并指示其无法工作。 远程日志记录 功耗可报告至远程系统日志服务器。可记录一段收集时间内的机箱总功耗、最小值、最大值和平均功耗。有关启用此功能和配置收集 或日志记录间隔的更多信息,请参阅管理和监测电源。 外部电源管理 CMC 电源管理可选择由 OpenManage Power
注: 当禁用 PM3 管理时,CMC 不会恢复最大机箱电源的先前设置。请参阅 CMC 日志了解先前的设置以便手动恢复该值。 使用 CMC Web 界面配置电源预算和冗余 注: 要执行电源管理操作,必须具有机箱配置管理员权限。 要配置电源预算,请执行以下操作: 1 在左侧窗格中,单击机箱概览 > > 电源 > 配置。 2 在预算/冗余配置页面中,根据需要选择以下任一或所有属性。有关字段说明的信息,请参阅联机帮助。 3 • 启用基于服务器的电源管理 • 系统输入功率上限 • 冗余策略 • 启用动态电源设备接入 • 禁用机箱电源按钮 • 最大节能模式 • 启用远程电源日志记录 • 远程电源日志记录间隔 单击应用保存更改。 使用 RACADM 配置电源预算和冗余 注: 要执行电源管理操作,必须具有机箱配置管理员权限。 要启用和设置冗余策略,请执行以下操作: 1 打开到 CMC 的串行/Telnet/SSH 文本控制台并登录。 2 根据需要设置属性: • 要选择冗余策略,请键入: racadm config -g cfgChassisPower -o cfgChas
• 若要恢复正常操作,请键入: racadm config -g cfgChassisPower -o cfgChassisMaxPowerConservationMode 0 • 要启用电源远程日志记录功能,请输入以下命令: racadm config -g cfgRemoteHosts -o cfgRhostsSyslogPowerLoggingEnabled 1 • 要指定所需的日志记录间隔,请输入以下命令: racadm config -g cfgRemoteHosts -o cfgRhostsSyslogPowerLoggingInterval n 其中 n 为 1 至 1440 分钟。 • 要确定是否已启用电源远程日志记录功能,请输入以下命令: racadm getconfig -g cfgRemoteHosts -o cfgRhostsSyslogPowerLoggingEnabled • 要确定电源远程日志记录间隔,请输入以下命令: racadm getconfig -g cfgRemoteHosts -o cfgRhostsSyslogPowerLoggingInterva
将显示一个对话框,要求您进行确认。 4 单击确定执行电源管理操作(例如,使系统重设)。 使用 RACADM 对机箱执行电源控制操作 打开到 CMC 的串行/Telnet/SSH 文本控制台,登录并键入: racadm chassisaction -m chassis 其中 为 powerup(开机)、powerdown(关机)、powercycle(关机后再开机)、nongraceshutdown(非正常关机)或 reset(重设)。 对服务器执行电源控制操作 可以一次对机箱中的多个服务器或对机箱中的单个服务器远程执行电源管理操作。 注: 要执行电源管理操作,必须具有机箱配置管理员权限。 使用 CMC Web 界面对多个服务器执行电源控制操作 要使用 CMC Web 界面对多个服务器执行电源控制操作,请执行以下操作: 1 在左侧窗格中,单击服务器概览 > 电源。 此时将显示电源控制页。 2 在操作列中,从下拉菜单中为所需服务器选择以下任一电源控制操作: • 无操作 • 打开服务器电源 • 关闭服务器电源 • 正常关机 • 重设服务器(热引导)
使用 RACADM 对 IOM 执行电源控制操作 要使用 RACADM 对 IOM 执行电源控制操作,请打开至 CMC 的串行/Telnet/SSH 文本控制台,登录并键入: racadm chassisaction -m switch 其中 表示要执行的操作:power cycle。 管理和监测电源 179
15 管理机箱存储 在 Dell PowerEdge VRTX 上,可以执行以下操作: • 查看物理磁盘驱动器和存储控制器的状态。 • 查看控制器、物理磁盘驱动器、虚拟磁盘和机柜的属性。 • 设置控制器、物理磁盘驱动器和虚拟磁盘。 • 分配虚拟适配器。 • 排除控制器、物理磁盘驱动器和虚拟磁盘故障。 • 更新存储组件。 • 在容错模式下使用共享存储控制器 • 启用或禁用 Shared PERC8(集成 2) 注: 最初创建虚拟磁盘时,不会显示快速初始化或完全初始化。 主题: • 查看存储组件的状态 • 查看存储拓扑 • 使用 CMC Web 界面查看 SPERC 的容错故障排除信息 • 使用 CMC Web 界面向插槽分配虚拟适配器 • 存储控制器中的容错 • 安全密钥不匹配 • 使用 CMC Web 界面查看控制器属性 • 使用 RACADM 查看控制器属性 • 导入或清除外部配置 • 配置存储控制器设置 • Shared PERC 控制器 • 使用 CMC Web 界面启用或禁用 RAID 控制器 • 使用 RACADM 启
• 解锁外部配置 • 加密擦除 • 为虚拟磁盘应用虚拟适配器访问策略 • 使用 CMC Web 界面修改虚拟磁盘属性 • 机柜管理模块 • 使用 CMC Web 界面查看机柜属性 查看存储组件的状态 要查看存储组件的状态,请执行以下操作: 1 在左侧窗格中,单击机箱概览 > 存储 > 属性 > 存储概览。 2 在存储概览页面中,可以执行以下操作: • 查看机箱中安装的物理磁盘驱动器的图形摘要及其状态。 • 查看所有存储组件的摘要,包含指向其相应页面的链接。 • 查看已用存储容量和总存储容量。 • 查看控制器信息。 注: 对于容错控制器,名称格式为:共享 (集成 )。例如,活动控制器为共享 PERC8(集成 1),对等控制器为共享 PERC8(集成 2)。 注: 如果次要 PERC 已禁用,则此名称将显示为已禁用 PERC(集成 2)。 • 查看最近记录的存储事件。 注: 有关更多信息,请参阅联机帮助。 查看存储拓扑 要查看存储拓扑,请执行以下操作: 1 在左侧窗格中,单击机箱概览 > 存储 > 属性 > 拓扑。 2
– Shared PERC 上的固件正确 – 扩展器上的正确固件 – 机箱基础架构上的正确固件 – Shared PERC 具有相同的设置:表示 SPERC 是否具有相同的设置。 • 单击 可以查看以下属性: – 检测到一个 Shared PERC – 检测到一个扩展器 – Shared PERC 和正确连线的扩展器 • 单击 可以查看以下属性: – 检测到两个 Shared PERC – Shared PERC 安装在不同的结构中 – Shared PERC 和 EMM 正确连接 – Shared PERC 上的固件正确 – Shared PERC 具有相同设置 • 单击 可以查看以下属性: – 检测到一个 Shared PERC – 检测到一个扩展器 – Shared PERC 和正确连线的扩展器 • 查看指示是否满足容错条件的每个属性的状态。 注: 如果容错环境中的某个属性不匹配相应条件,则系统会针对该属性显示立即更新选项。 注: 系统会针对某些属性显示了解如何选项。如需有关该属性的更多信息,请单击了解如何。 3 要满足属性的条件,请单击立即更新。 此时会显示存储组件更新页面,此
要向服务器插槽映射或从服务器插槽中取消映射虚拟适配器: 1 在左侧窗格中,单击机箱概览 > 存储 > 设置 > 虚拟化。 此时会显示存储虚拟化页面。 2 要选择所需的分配类型,可从分配模式:虚拟磁盘至虚拟适配器表中选择: • 单个分配 - 选择此选项可将一个虚拟磁盘分配到一个虚拟适配器。 • Multiple Assignment(多个分配)— 选择此选项可将一个虚拟磁盘分配给多个虚拟适配器。选择此选项前,请事先阅读屏幕 上的说明。 注: 仅当服务器上安装了群集服务时,才可以选择 Multiple Assignment(多个分配)模式。在没有群集服务的情况下使用此 模式可能会导致损坏或丢失数据。 注: 即使在 CMC Web 界面中 Assignment Mode(分配模式)设置为 Single Assignment(单一分配),您也可以从 CMC CLI 将一个虚拟磁盘分配给多个虚拟适配器。 3 在 Virtual Adapters Mapped(映射的虚拟适配器)表中,从 Action(操作)下拉菜单中选择以下选项之一,然后单击 Apply(应 用)。 • - 选择必须
安全密钥不匹配 您可以使用加密密钥 ID 和密码短语在控制器上创建安全密钥。控制器仅比较创建安全密钥时使用的密码短语来识别两个控制器是否 有相同的安全的密钥。因此,加入群集的两个控制器是容错的,即使它们具有不同的加密密钥 ID,只要它们具有相同的密码短语。 如果检测到两个对等控制器之间的安全密钥不匹配,容错模式更改为“降级”。机箱运行状况页面上显示重要警报并且监控不可能显 示适当驱动器关联。 如果检测到安全密钥,通过在一个控制器上创建、修改或删除安全密钥解决此密钥不匹配问题,然后在该控制器上执行任何其他存储 安全操作。解决不匹配问题后关机后再开机。结合使用两个非高可用性控制器之前,修改密钥以便他们匹配。此操作会有助于导入与 加入群集的每个控制器关联的安全驱动器。 对于外部控制器,修改密钥使它们匹配,然后对它们布线以实现容错。安全密钥的修改有助于导入语加入群集的每个控制器相关的加 密驱动器。的的修改密钥对其进行布线之前的容错功能。 安全密钥的修改有助于导入的加密驱动器。 使用 CMC Web 界面解决安全密钥不匹配 要使用 CMC Web 界面解决安全密钥不匹配问题,请执行以下操作: 1 关闭服务器模块。
导入或清除外部配置 必须将外部磁盘插入机箱。 要导入或清除外部配置: 1 在左侧窗格中,单击机箱概览 > 存储 > 控制器 > 设置。 2 在控制器设置页面中,在外部配置部分,对于相应的控制器,请单击: • 清除外部配置以清除现有磁盘的配置。 • 导入/恢复以导入具有外部配置的磁盘。 注: 当您移除某个特定虚拟磁盘的磁盘时,重设控制器并依次重新插入驱动器,不同大小和状态的多个虚拟磁盘实例将显示 在系统配置页面。导入活动完成后,将显示虚拟磁盘的正确状态和大小。 配置存储控制器设置 您可以修改存储控制器的现有属性,或配置刚安装的存储控制器的属性。 使用 CMC Web 界面配置存储控制器设置 确保机箱中至少安装了一个存储控制器。 要配置存储控制器设置: 1 在 CMC Web 界面中,转至机箱概览 > 存储 > 控制器 > 设置。 2 在控制器设置页面中,从控制器下拉式菜单中选择控制器。 注: 请注意下列事项: • 如果存储控制器处于容错模式下,并且这两个存储控制器的固件版本相同,二者在下拉菜单中都会显示为单一设备。例 如 Shared PERC8 (Integrated 1) 或 Sha
Shared PERC 控制器 对于安装有两个集成 Shared PERC 的系统,可以将其操作模式由容错模式更改为非容错模式,或者相反,使用 Web 界面或 RACADM CLI 启用或禁用第二个内置的 Shared PERC 8 控制器。 对于内置的 Shared PERC 8 控制器,可以禁用第二个集成控制器。禁用第二个集成控制器后,第一个集成控制器不再处于容错模式。 启用第二个集成控制器后,这两个集成控制器默认为处于容错模式。使用 racadm raid disableperc:RAID.ChassisIntegrated.2-1 命令可以禁用第二个集成控制器。 对于外部机柜,插槽 5 和插槽 6 中的 External Shared PERC 8 卡可以使用 racadm raid disableperc: RAID.ChassisSlot. 5-1 and racadm raid disableperc: RAID.ChassisSlot.
• 机箱中的所有服务器均已关闭。 • 集成 1 PERC 当前是活动控制器。 注: 如果集成 1 PERC 当前不是活动控制器,则关闭机箱电源并重新打开,使此控制器成为活动控制器。 • 两个 CMC 都具有支持此功能的相同固件版本。 注: 在禁用集成 2 PERC 后,要更换 CMC 卡,建议您在将该卡分配为系统中的活动 CMC 控制器之前,将 CMC 卡更新为固件版 本 1.
使用 RACADM 启用或禁用外部 RAID 控制器的容错功 能 要启用容错功能,请执行以下操作: racadm raid controllers: -p HighAvailabilityMode ha 要禁用容错功能,请执行以下操作: racadm raid set controllers: -p HighAvailabilityMode None 使用 CMC Web 界面查看物理磁盘属性 确保机箱中安装了物理磁盘。 要查看物理磁盘驱动器的属性,请执行以下操作: 1 在左侧窗格中,转至机箱概览 > 存储 > 物理磁盘。 此时将显示属性页。 2 要查看所有物理磁盘驱动器的属性,请在物理磁盘部分,单击 。 注: 在集成共享适配器的容错模式下,显示的属性有: • 主动控制器 - 共享 PERC8(集成 1) • 冗余/故障转移控制器 - 共享 PERC8(集成 2) 在外部共享适配器的容错模式下,显示的属性有: • 活动控制器 - Shared PERC8(SPE
将显示配置物理磁盘页。 2 在配置物理磁盘部分下,从物理磁盘操作下拉菜单中,为每个物理磁盘驱动器选择未分配或全局热备用,然后单击应用。 注: 仅当相应的控制器上存在至少一个虚拟磁盘时,才允许分配全局热备份。 使用 RACADM 分配全局热备用 要使用 RACADM 分配全局热备用,请运行命令 racadm raid hotspare: -assign yes -type ghs。 有关使用 RACADM 命令的更多信息,请参阅 Chassis Management Controller for PowerEdge VRTX RACADM Command Line Reference Guide(Chassis Management Controller for PowerEdge VRTX RACADM 命令行参考指南)。 恢复物理磁盘 要恢复物理磁盘: 1 在 CMC Web 界面中,转至机箱概览 > 存储 > 物理磁盘 > 设置。 2 在设置页面中,在恢复物理磁盘区域中选择必须恢复的物理磁盘,然后从下拉式菜单中相应地选择重建驱动器、取消重建或强制 联机,然后单击应用。 使用 CMC Web
初始化选项允许您创建虚拟磁盘而不初始化。此选项将覆盖默认行为,其中快速初始化过程将在创建虚拟磁盘时开始。 加密虚拟磁盘选项允许您在自加密驱动器 (SED) 上创建加密虚拟磁盘。 注: 加密虚拟磁盘选项仅在控制器设置页面上为特定控制器配置加密密钥时候启用。 管理加密密钥 在控制器上创建的加密或安全密钥用于锁定或解锁对 SED 上所创建加密虚拟磁盘。您只能为具有加密功能的控制器创建只有一个加 密密钥。您可以通过在 控制器设置页面中输入加密密钥标识符和密码短语创建加密密钥。CMC 还允许您修改加密密钥短语和删除加 密密钥。 使用 CMC Web 界面创建加密密钥 如果加密密钥未配置,则可以为控制器创建加密或安全密钥。 要添加加密密钥,请执行以下操作: 1 在左侧窗格中,转至存储 > 控制器 > 设置。 2 从安全密钥下拉列表中,选择创建安全密钥。 随即显示弹出窗口。 3 输入安全密钥和密码并单击确定。 4 在控制器设置页面中,单击 应用。 创建加密密钥之后,安全密钥的状态更改为已启用。 使用 RACADM 创建加密密钥 要通过运行 RACADM 命令创建加密密钥,请使用以下语法: racadm
有关更多信息,请参阅 Chassis Management Controller for PowerEdge VRTX RACADM Command Line Reference Guide(Chassis Management Controller for PowerEdge VRTX RACADM 命令行参考指南)。 使用 CMC Web 界面删除加密密钥 您只能在加密密钥没有与加密的虚拟磁盘关联时才能将其删除。 要删除加密密钥,请执行以下操作: 1 在左侧窗格中,转至存储 > 控制器 > 设置。 2 从安全密钥下拉列表中,选择删除安全密钥。 将显示一条确认消息。 3 单击确定继续。 删除加密密钥后,不属于虚拟磁盘的所有 SED 已安全擦除。有关详情,请参阅联机帮助。 使用 RACADM 删除加密密钥 要通过运行 RACADM 命令删除加密密钥,请使用以下语法: racadm raid deletesecuritykey:RAID.ChassisIntegrated.
有关更多信息,请参阅 Chassis Management Controller for PowerEdge VRTX RACADM Command Line Reference Guide(Chassis Management Controller for PowerEdge VRTX RACADM 命令行参考指南)。 解锁外部配置 安全虚拟磁盘中的驱动器称为受保护的驱动器。受保护的驱动器可以从一个控制器迁移到另一个控制器。如果为目标控制器配置不同 的加密或安全密钥,则这些驱动器的安全保护状态会显示为“已锁定”并且无法显示为“预览外部配置”的一部分。“导入外部配 置”检测不到这些外部驱动器。 运行解除锁定命令时,需要为这些驱动器提供源控制器 密码短语和密钥 ID。即使在解除锁定后,“外部控制器密钥”仍然保护这些 驱动器。不过,您可以在现有的“预览外部配置”中搜索外部驱动器时看到这些驱动器。您可以导入或清除这些受保护的驱动器上的 外部配置。 如果使用不同安全密钥的外部驱动器从一个控制器迁移到另一个驱动器,则在解除锁定从另一个控制器迁移的驱动器之前,需要解除 锁定并且导入或清除来自一个外部控制器的驱动器组。如
加密擦除 您可以使用加密擦除选项将安全 SED 上的数据安全擦除。甚至检测到虚拟磁盘并受到威胁之后,加密数据也存在于驱动器上。 加密 擦除可以用于以下条件: • 擦除要淘汰/重复使用的安全驱动器。 • 不需要导入安全和锁定外部配置的情况下安全擦除数据。 • 密码段元丢失的情况下恢复锁定的驱动器。 您可以在一个或更多的 SED 物理磁盘上执行加密擦除。 小心: 执行“加密擦除”任务时,将擦除物理磁盘上的所有数据。 执行加密擦除 如果物理磁盘是虚拟磁盘的一部分,将其从虚拟磁盘中移除,然后再执行加密擦除。 要执行加密擦除,请执行以下操作: 1 在左侧窗格中,转至存储 > 物理磁盘 > 设置。 将显示配置物理磁盘页。 2 选择要擦除数据的物理磁盘。 3 从物理磁盘操作下拉列表中,选择加密擦除并单击 应用。 将显示一条消息,提示您确认操作。 4 单击是继续。 所选物理磁盘上的所有数据将被移除。 为虚拟磁盘应用虚拟适配器访问策略 确保已安装物理磁盘驱动器,并且已创建虚拟磁盘。 要应用虚拟适配器访问策略,请执行以下操作: 1 在左侧窗格中,单击机箱概览 > 存储 > 虚拟磁盘 > 分配。
• • • • • • 编辑策略:读取高速缓存 编辑策略:写入高速缓存 编辑策略:磁盘高速缓存 初始化:快速 初始化:完全 加密虚拟磁盘 机柜管理模块 机柜管理模块 (EMM) 提供了机柜的数据路径和机柜管理任务,它会监测和控制机柜组件以及对驱动器的访问。 EMM 将向主机服务器传递机柜属性。EMM 模块监测的机柜组件如下: • • • • • 风扇 电源设备 温度探测器 插入或卸下物理磁盘 机柜上的 LED 查看 EMM 状态和属性 EMM 状态显示 EMM 的运行状况。EMM 包含机柜唯一的状态值。最多可以使用两个 EMM。机柜固件会创建每个 EMM 的状态。 使用 Web 界面查看 EMM 状态和属性 要查看 EMM 的状态和属性,请执行以下操作: 单击机箱概览 → 存储 → 机柜 → 属性。机柜页面提供了机箱中机柜的 EMM 状态和属性。展开集成机柜或外部机柜可以查看 EMM 的状态和属性。有关更多信息,请参阅 CMC Online Help(CMC 联机帮助)。 使用 RACADM 查看 EMM 状态和属性 要查看 EMM 的状态,请使用 racadm raid get emms -o
单击机箱概览 → 存储 → 机柜 → 属性。机柜页面提供机箱中机柜的运行状况。有关更多信息,请参阅 CMC Online Help(CMC 联机 帮助)。 注: 卸下 EMM、PSU 或风扇但主要状态保持不变时,机柜的汇总状态变为严重。CMC 或机箱关闭电源后重启时,主要状态也变 为严重。 使用 RACADM 查看机柜的状态和属性 要查看机柜状态,请使用 racadm raid get enclosures —o —p Status 命令。 要查看机柜属性,请使用 racadm raid get enclosures —o 命令。 有关更多信息,请参阅 dell.
有关更多信息,请参阅 dell.
有关更多信息,请参阅 dell.
16 管理 PCIe 插槽 默认情况下,所有插槽均未映射。您可以执行以下操作: • 查看机箱中所有 PCIe 插槽的状态。 • 分配 PCIe 插槽或从服务器中移除 PCIe 插槽。 在向服务器分配 PCIe 插槽之前请考虑以下因素: • 不能将空 PCIe 插槽分配给开启的服务器。 • 如果当前被分配的服务器(源)处于开启状态,则适配器已分配给某一服务器的 PCIe 插槽不能分配给另一服务器。 • 不能将适配器已分配给某个服务器的 PCIe 插槽分配给另一个已经开启的(目标)服务器。 从服务器中移除分配的 PCIe 插槽之前,请考虑以下事项: • 如果 PCIe 插槽为空,则可以从服务器取消分配该插槽,即使该服务器处于开启状态。 • 如果 PCIe 插槽有适配器且未开启,则可以从服务器取消分配该插槽,即使该服务器处于开启状态。当某个插槽为空,并且被分 配的服务器处于开启状态,然后用户在空插槽中插入适配器时,可能会发生这种情况。 将外部 PCIe 适配器映射到刀片服务器或取消外部 PCIe 适配器到刀片服务器的映射: • 由于适配器始终是作为非共享设备开启的,因此该适配器会映射到
注: 对于包含有从外部 PCIE 插槽安装的 SPERC(或任何共享)设备的外部 PCIe 插槽,用户界面可将其与专用适配器区分开 来,因为这些共享设备具有不同的属性。 使用 CMC Web 界面将 PCIe 插槽分配至服务器 要将 PCIe 插槽分配至服务器,请执行以下操作: • 在左侧窗格中,单击机箱概览 > PCIe 概览 > 设置 > 映射:从 PCIe 插槽到服务器插槽。在映射:从 PCIe 插槽到服务器插槽页面 的操作列中,从操作下拉菜单中选择相应的服务器名称,然后单击应用。 请注意下列事项: • 如果没有许可证,则最多可将两个 PCIe 插槽映射到一个半高服务器。如果安装了全高服务器,您可以将两个 PCIe 插槽映射到服 务器上部插槽,两个映射至服务器下部(扩展)插槽,即每个全高服务器共四个 PCIe 插槽。 • 您可以将服务器插槽映射到 8 个 PCIe 插槽中的任何一个。 • 全高服务器的上部和下部两个夹层卡都已插装。否则,在 POST 期间系统将停止,页面中会显示 或 键,您可以按其中 任意一个。 • 对于全高服务器,最多可以将两个 PCIE 插槽映
• 准备 PCIe 卡以呈现给服务器模块 • 准备多个卡以便由服务器 BIOS 进行配置 • 初始化所有卡,然后再将刀片节点开机 所有这些过程需要几秒钟才能完成,这会导致延迟 PCIe 卡的初始化。CMC VRTX 中的 PCIe 穿越功能可减少流程的周期时间。PCIe 穿越功能可实现: • 服务器节点快速开机,因而快速将 PCIe 卡开机。 • 在以下情况下,PCIe 卡的电源状态会延长预定义的时间段: – 关联服务器关机后。 – 适配器查找流程完成后。 • 在查找流程后,卡的通电就绪状态会延长预定义的时间。这一延长消除了常见类型的电源循环方案的延迟。该卡仍然处于就绪状 态,继续等待节点分配和电源打开。这段时间结束后该卡将关闭电源。 。 注: 在该时间段结束时,关闭 PCIe 卡电源。每次机箱门打开时,处于穿越模式的所有适配器也会关闭电源。 注: • 如果 CMC 没有足够的功率,则 CMC 会关闭处于穿越模式的所有适配器,从而释放分配给这些适配器的所有功率。如果电源 设备已恢复,则功率将重新分配给 PCIe 插槽。此功率恢复使插卡能够准备好用于服务器分配而没有延迟。 • 所有
3 在超时字段中,输入要经过多长时间后启用穿越功能。 键入零 (0) 或 60-1800 秒的值。零表示无限期超时。 4 单击应用。 使用 RACADM 配置 PCIe 穿越属性状态 您可以通过运行以下命令配置 PCIe 功率穿越属性: • 要禁用穿越功能,请运行命令 racadm setpciecfg ridethru –d • 要启用穿越功能,请运行命令 racadm setpciecfg ridethru –e • 要重设穿越超时属性,请运行命令 racadm setpciecfg ridethru –t • 要设置可接受的超时范围,请运行命令 racadm setpciecfg help ridethru 有关更多信息,请参阅 Chassis Management Controller for PowerEdge VRTX RACADM Command Line Reference Guide(Chassis Management Controller for PowerEdge VRTX RACADM 命令行参考指南)。 管理 PCIe 插槽 201
17 故障排除和恢复 本部分介绍如何使用 CMC Web 界面执行与远程系统问题恢复和故障排除相关的任务。 • 查看机箱信息。 • 查看事件日志。 • 收集配置信息、错误状态和错误日志。 • 使用诊断控制台。 • 管理远程系统上的电源。 • 管理远程系统上的 Lifecycle Controller 作业。 • 重设组件。 • 网络时间协议 (NTP) 故障排除。 • 网络故障排除。 • 警报故障排除。 • 重设忘记的管理员密码。 • 保存并还原机箱配置设置和证书。 • 查看错误代码和日志。 注: 在 Windows 10 客户端上,Microsoft 不支持 WinRM,所以应使用 Power Shell,不要使用 WinRM。 主题: • 重设忘记的管理密码 • 使用 RACDUMP 收集配置信息、机箱状态和日志 • 远程系统故障排除首先需要执行的步骤 • 警报故障排除 • 查看事件日志 • 使用诊断控制台 • 重设组件 • 保存或还原机箱配置 • 网络时间协议错误故障排除 • LED 颜色和闪烁样式说明 • 无
• 使用跳线短接密码恢复排针引脚 • 将 CMC 模块重新插入机箱,在 CMC 处于联机状态后,默认凭据将处于活动状态(用户名:root / 密码:calvin) • 使用默认凭据登录 CMC 并更改密码 • 更改密码后,从密码恢复排针卸下 CMC 模块和跳线 • 将 CMC 模块重新插入机箱,在 CMC 处于联机状态后,新凭据处于活动状态 使用 RACDUMP 收集配置信息、机箱状态和日志 racdump 子命令是获得全面机箱状态、配置状态信息和历史事件日志的单一命令。 racdump 子命令显示以下信息: • 常规系统/RAC 信息 • CMC 信息 • 机箱信息 • 会话信息 • 传感器信息 • 固件版次信息 支持的接口 • CLI RACADM • 远程 RACADM • Telnet RACADM racdump 包含以下子系统并聚集以下 RACADM 命令。有关 racdump 的更多信息,请参阅 RACADM Command Line Reference Guide for CMC in PowerEdge VRTX(RACADM for
下载 SNMP 管理信息库文件 CMC 的 SNMP 管理信息库 (MIB) 文件可以定义机箱类型、事件和指示灯。CMC 使您能够使用 Web 界面下载 MIB 文件。 要使用 CMC Web 界面下载 CMC 的 SNMP MIB 文件: 1 在左侧窗格中,单击机箱概览 > 网络 > 服务 > SNMP。 2 在 SNMP 配置部分中,单击保存将 CMC MIB 文件下载到本地系统。 有关 SNMP MIB 文件的更多信息,请参阅 dell.
• 问题:一部分服务器在交流电网故障后失去供电,即便机箱在带有四个电源设备的电网冗余配置下运行。 – 解决方案:发生交流电网故障时,如果电源设备未正确连接到冗余交流电网,就会发生这种问题。电源冗余策略要求左侧的 两个电源设备连接到一个交流电网,右侧的两个电源设备连接到另一个交流电网。如果未正确连接两个 PSU,例如将 PSU 2 和 PSU 3 连接到错误的交流电网,则交流电网故障会造成最低优先级服务器发生断电。 • 问题:最低优先级服务器在 PSU 故障后断电。 – 解决方案:为了防止未来的电源设备故障导致服务器断电,请确保机箱至少有三个电源设备,并且配置了电源设备冗余策 略,以防止 PSU 故障影响服务器运行。 • 问题:数据中心的室温提高时,总体服务器性能下降。 – 解决方案:如果系统输入功率上限配置的值导致风扇的电源需求增加而将服务器的电源分配降低,则会发生这种问题。用户 可将系统输入功率上限增加到更高的值,允许为风扇分配额外电源而不会影响服务器性能。 警报故障排除 使用 CMC 日志和跟踪日志进行 CMC 警报故障排除。每次成功或失败的电子邮件和/或 SNMP 陷阱传递尝试都会记录到 C
注: CMC 会创建一个新的日志条目表示日志已清除。 注: 要清除硬件日志,您必须具有清除日志管理员权限。 使用 RACADM 查看硬件日志 要使用 RACADM 查看硬件日志,请打开至 CMC 的串行/Telnet/SSH 文本控制台,登录并键入: racadm getsel 要清除硬件日志,请键入: racadm clrsel 查看机箱日志 CMC 会生成机箱相关事件的日志。CMC 可通过系统事件日志 (SEL)、SNMP 和电子邮件界面提供警报功能。 当一个或多个 PowerEdge 服务器开机时,会插入 SPERC。 注: • 要清除机箱日志,您必须具有清除日志管理员权限。 使用 RACADM 查看机箱日志 要使用 RACADM 查看机箱日志信息,请打开至 CMC 的串行、Telnet、SSH 文本控制台,登录并输入以下命令: racadm chassislog view 此命令显示最近的 25 个机箱日志条目。 要显示查看机箱日志的可用选项,请运行以下命令: racadm chassislog help view 使用 Web 界面查看机箱日志 您可以查看、保存和清除机箱日志。可以基于日志
有关命令的信息,请参阅联机帮助。 此时将显示诊断结果页面。 重设组件 您可以重设活动的 CMC,或者虚拟重置服务器,使其产生如同被卸下并重新插入的效果。如果机箱有一个待机 CMC,重设活动的 CMC 会造成故障转移并且待机 CMC 变为活动状态。 注: 要重设组件,必须具备调试命令管理员权限。 要使用 CMC Web 界面重设组件,请执行以下操作: 1 在左侧窗格中,单击机箱概览 > 故障排除 > 重设组件。 此时将显示重设组件页。 2 要重设活动的 CMC,请在 CMC 状态部分,单击重设/故障转移 CMC。如果存在待机 CMC 并且机箱为完全冗余,则会发生故障 转移,导致待机 CMC 变为活动状态。但是,如果不存在待机 CMC,则将重新引导可用的 CMC。 3 要虚拟重置服务器,请在虚拟重置服务器部分,选择要重置的服务器,然后单击应用选择。 有关更多信息,请参阅联机帮助。 此操作使服务器产生如同卸下并重新插入的效果。 保存或还原机箱配置 这是一项许可功能。要使用 CMC Web 界面保存或还原机箱配置备份,请执行以下操作: 1 在左侧窗格中,单击机箱概览 > 设置 > 机箱备份。将显示机箱
如果您尝试配置基于 Windows 的 NTP 服务器,则它有助于增加 MaxDist 参数(为 ntpd)。更改此参数之前,请了解所有含义, 因为默认设置必须足够大才可配合多数 NTP 服务器。 要修改参数,请键入以下命令: racadm config –g cfgRemoteHosts –o cfgRhostsNtpMaxDist 32 在进行更改后,禁用 NTP,等待 5-10 秒,然后再次启用 NTP: 注: NTP 可能还要再等待 3 分钟才能再次同步。 要禁用 NTP,请键入: racadm config –g cfgRemoteHosts –o cfgRhostsNtpEnable 0 要启用 NTP,请键入: racadm config –g cfgRemoteHosts –o cfgRhostsNtpEnable 1 如果 NTP 服务器正确配置且此条目存在于追踪日志中,则此项确认 CMC 不能与任何已配置的 NTP 服务器同步。 如果未配置 NTP 服务器 IP 地址,可能会看到与以下内容类似的跟踪日志条目: Jan 8 19:59:24 cmc ntpd[1423]: Cannot fi
组件 IOM(常规) IOM(直通) 鼓风机 PSU LED 颜色,闪烁样式 状态 绿色,暗色 已关闭电源 蓝色,稳定发光 正常 蓝色,闪烁 用户启用的模块标识符 琥珀色,稳定发光 未使用 琥珀色,闪烁 故障 蓝色,暗色 无故障 绿色,稳定发光 已打开电源 绿色,闪烁 正在上载固件 绿色,暗色 已关闭电源 蓝色,稳定发光 正常/堆栈主装置 蓝色,闪烁 用户启用的模块标识符 琥珀色,稳定发光 未使用 琥珀色,闪烁 故障 蓝色,暗色 无故障/堆栈从属装置 绿色,稳定发光 已打开电源 绿色,闪烁 未使用 绿色,暗色 关机 蓝色,稳定发光 正常 蓝色,闪烁 用户启用的模块标识符 琥珀色,稳定发光 未使用 琥珀色,闪烁 故障 蓝色,暗色 无故障 绿色,稳定发光 风扇正在运行 绿色,闪烁 未使用 绿色,暗色 已关闭电源 琥珀色,稳定发光 无法识别风扇类型,更新 CMC 固件 琥珀色,闪烁 风扇出现故障;转速计超出范围 琥珀色,暗色 未使用 (椭圆)绿色,稳定发光 交流正常 (椭圆)绿色,闪烁
组件 机柜 LED 颜色,闪烁样式 状态 (圆形)绿色,暗色 直流不正常 蓝色 主机服务器正在识别机柜 琥珀色 已关闭或重设,故障状态 无响应 CMC 的故障排除 如果使用任意界面(Web 界面、Telnet、SSH、远程 RACADM 或串行)都无法登录到 CMC,则可以通过观察 CMC 上的 LED、使用 DB-9 串行端口获取恢复信息或恢复 CMC 固件映像来验证 CMC 功能。 注: 无法使用串行控制台登录待机 CMC。 观察 LED 隔离问题 插卡的左侧有两个 LED: • 顶部 LED - 指示电源状态。如果该 LED 未亮: – 请验证至少有一个交流电源设备。 – 验证 CMC 卡是否正确就位。可以释放或拉动排出器手柄,卸下 CMC,重新安装 CMC 以确保插板已插入到位且闩锁正确关 闭。 • 底部左侧 LED - 此 LED 有多种颜色。当 CMC 活动且正在运行时,如果没有问题,则底部 LED 是蓝色。如果是琥珀色,则表示检 测到故障。故障可能由以下三种事件中的任意一种引发: – 核心故障。这种情况下,必须更换 CMC 板。 – 自检故障。这种情况下,必须更换 C
• 如果提示指出 Bad FW Images(固件映像损坏),请完成恢复固件映像中的任务。 恢复固件映像 当 CMC 无法正常运行引导时,它将进入恢复模式。在恢复模式下,提供小型命令子集以便通过上载固件更新文件 vrtx_cmc.bin 对闪 存设备重新编程。该文件与正常固件更新所使用的固件映像文件相同。恢复进程将显示其当前活动并在完成后引导至 CMC 操作系 统。 当在 recovery 提示符下键入 recover 然后按下 时,将显示恢复原因和可用子命令。下面是一个恢复序列示例: recover getniccfg recover setniccfg 192.168.0.120 255.255.255.0 192.168.0.1 recover ping 192.168.0.100 recover fwupdate -g -a 192.168.0.
• 启用容错 - 启用 External shared PERC 8 卡的容错模式。 • 禁用容错 - 禁用 External shared PERC 8 卡的容错模式。 注: 只有 External Shared PERC 8 卡才会显示启用容错和禁用容错。External Shared PERC 8 卡的默认模式为非容错模 式。 注: • 如果刀片已开机,将显示一条错误消息。 • 如果刀片已开机,命令将会失败。 容错机箱中的热插拔机柜 1 确保插槽 5 和 6 机箱不容错。 2 断开机柜的连接。 3 将插槽 5 和 6 的状态更改为容错模式。 4 以容错布线方式重新连接机柜。 断开机柜的连接之前和重新连接机柜之前对机箱关闭电源后再重新接通,驱动器保持先前的 SCSI - 3 保留,直至机箱关闭电源后再重 新接通。 212 故障排除和恢复
18 使用 LCD 面板界面 可以使用机箱中的 LCD 面板执行配置和诊断,并获取关于机箱及其组件的状态信息。 下图说明了 LCD 面板。LCD 屏幕显示菜单、图标、图片和消息。 图 4: LCD 显示屏 1 LCD 屏幕 3 滚动按钮(4 个) 2 选择(“选中”)按钮 主题: • LCD 导航 • 诊断程序 • 前面板 LCD 消息 • LCD 模块与服务器状态信息 LCD 导航 LCD 面板的右侧包含五个按钮:四个箭头按钮(向上、向下、向左和向右)以及一个中央按钮。 • 要在屏幕之间移动,请使用向右(下一屏)和向左(上一屏)箭头按钮。使用面板过程中的任意时刻,都可以返回到上一屏。 • 要在屏幕上的选项间滚动,请使用向下和向上箭头按钮。 • 要选择并保存屏幕上的某个项目并移动到下一屏,请使用中央按钮。 可以使用上、下、左和右箭头按钮更改屏幕上所选的菜单项或图标。所选项目以浅蓝色背景或边框显示。 当 LCD 屏幕上显示的消息长度超过屏幕长度,使用左和右箭头按钮向左右滚动文本。 下表说明的图标用于在 LCD 屏幕之间导航。 使用 LCD 面板界面 213
表.
机柜菜单 从此屏幕可导航至以下屏幕: • 正面状态 • 背面状态 • 侧面状态 • 机柜状态 使用导航按钮高亮显示所需的项目(高亮显示后退图标返回主菜单),然后按下中央按钮。此时将显示所选的屏幕。 IP 摘要菜单 IP 摘要屏幕显示关于 CMC(IPv4 和 IPv6)以及机箱中安装的每个服务器的 IP 信息。 使用上下箭头按钮在列表中滚动。使用左右箭头按钮滚动超过屏幕长度的所选消息。 使用上下箭头按钮选择后退图标并按下中央按钮返回机柜菜单。 设置 设置菜单显示可配置项目的菜单: • LCD 语言 - 选择要用于 LCD 屏幕文字和消息的语言。 • 机箱方向 - 基于机箱的安装方向,选择塔模式或机架模式。 • 默认 LCD 屏幕 - 选择当 LCD 面板上没有任何活动时显示的屏幕(主菜单、正面状态、背面状态、侧面状态或自定义)。 • 网络设置 - 选择配置 CMC 的网络设置。有关此功能的更多信息,请参阅使用 LCD 面板界面配置 CMC 网络。 使用上箭头和下箭头按钮高亮显示菜单中的某个项目,或者如果想返回主菜单屏幕,可高亮显示后退图标。 要激活您的选择,请按中央按钮。
• 侧面状态(机箱的左侧图形视图) • 自定义(带机箱名称的 Dell 徽标) 当前活动默认屏幕以浅蓝色高亮显示。 1 使用上箭头键和下箭头键高亮显示要设置为默认状态的屏幕。 2 按下中央按钮。此时会高亮显示接受图标。 3 再次按下中央按钮确认更改。将显示默认屏幕。 诊断程序 LCD 面板可帮助诊断机箱中任何服务器或模块的问题。如果机箱或机箱中任何服务器或其他模块发生问题或故障,则 LCD 面板状态 指示灯呈琥珀色闪烁。在主菜单上,具有琥珀色背景的图标会显示在菜单项(机柜)旁边,该菜单项导向前、后、侧或机柜状况。 通过跟踪 LCD 菜单系统中的琥珀色图标,可以显示状态屏幕和发生问题项目的错误消息。 通过卸下导致问题的模块或服务器或通过清除该模块或服务器的硬件日志,可以移除 LCD 面板上的错误消息。对于服务器错误,使 用 iDRAC Web 界面或命令行界面清除服务器的系统事件日志 (SEL)。对于机箱错误,使用 CMC Web 界面或命令行界面清除硬件日 志。 前面板 LCD 消息 本节包括前面板 LCD 上显示错误和状态信息两个小节。 LCD 上的错误消息具有与从 CLI 或 Web
表. 46: 机箱或机柜状态 项目 说明 用户定义的名称 示例:“Dell Rack System”。这可以通过使用 CMC CLI 或 Web 界面配置。 错误消息 如果没有错误,则会显示“没有错误”,否则会列出错误消息,首先列出的是严重错误,然后是 与警告相关的错误。 型号 示例:“PowerEdgeM1000” 功耗 当前功耗(瓦)。 峰值功率 峰值功耗(瓦)。 最小功耗 最小功耗(瓦)。 环境温度 当前环境温度(摄氏度)。 Service Tag 工厂分配的服务标签。 CMC 冗余模式 非冗余或冗余。 PSU 冗余模式 非冗余、电网冗余或直流冗余。 表. 47: 风扇状态 项目 说明 名称/位置。 示例:Fan1、Fan2 等。 错误消息 如果没有错误,则会显示“没有错误”,否则会列出错误消息,首先列出的是严重错误,然后是与警告相关 的错误。 RPM 当前风扇速度 (RPM)。 表.
项目 说明 IP 地址 只有当 IOM 打开时才显示。对于直通类型 IOM,此值为零。 Service Tag 工厂分配的服务标签。 表. 50: KVM 映射状态 项目 说明 服务器 显示可以映射 KVM 的服务器的列表。 错误消息 如果没有错误,则会显示“没有错误”,否则会列出错误消息,首先列出的是严重错误,然后是与警告相关 的错误。 已映射 显示映射到 KVM 的服务器的列表(如果有)。 插槽 <号> 指示 KVM 映射到的服务器插槽。可能的值为 SLOT-<01 to 04>。 未映射 显示 KVM 是否未映射到任何服务器。 表.
项目 说明 运行状况 良好 固件版本 SPERC 版本 制造商 制造商名称 状态 脱机、联机或待机 - 表示 SPERC 的电源状态。 表. 54: PCIe 卡状态 项目 说明 PCIe 卡 以 PCIe 卡 的格式显示 PCIe 卡的名称,其中“n”是 PCIe 卡的编号,例如 PCIe 卡 1、PCIe 卡 2 等。 错误消息 如果没有错误,则会显示“没有错误”,否则会列出错误消息,首先列出的是严重错误,然后是与警告 相关的错误。 工作状态 关或开 - 指示 PCIe 是否正常工作。 名称: PCIe 卡的名称。 映射到服务器 已映射或未映射。 表.
项目 说明 注: 可通过 CMC CLI 或 Web 界面设置此表。 名称 服务器名称,用户可通过 Dell OpenManage 进行设置。只有 iDRAC 完成引导并且服务器支持此功能时才显示该 名称,否则显示 iDRAC 引导消息。 型号 如果 iDRAC 完成引导则显示。 Service Tag 如果 iDRAC 完成引导则显示。 BIOS Version 服务器 BIOS 固件版本。 最后一个开机自检 显示最后一个服务器 BIOS 开机自检代码消息字符串。 代码 iDRAC 固件版本 如果 iDRAC 完成引导则显示。 注: iDRAC 版本 1.01 显示为 1.1。不存在 iDRAC 版本 1.
19 常见问题 本部分列出了关于以下方面的常见问题: • RACADM • 管理和恢复远程系统 • Active Directory • FlexAddress 和 FlexAddressPlus • IOM 主题: • RACADM • 管理和恢复远程系统 • Active Directory • FlexAddress 和 FlexAddressPlus • IOM RACADM 在执行 CMC 重设(使用 RACADM racreset 子命令)后,如果输入命令,则显示以下消息: racadm Transport: ERROR: (RC=-1) 这条消息什么意思? 只有在 CMC 完成重设后,才能发出另一条命令。 使用 RACADM 子命令有时会显示以下一条或多条错误: • 本地错误消息 - 诸如语法、印刷错误和错误名称等问题。例如:ERROR: 使用 RACADM help 子命令可显示正确的语法和用法信息。例如,如果在清除机箱日志时出现错误,可以运行以下子命令。 racadm chassislog help cl
管理和恢复远程系统 为什么在属性更改后,远程 RACADM 和基于 Web 的服务会变得不可用? CMC Web 服务器重设后,可能需要等待一分钟,远程 RACADM 服务和 Web 界面才会可用。 CMC Web 服务器会在发生以下情况后重设: • 使用 CMC Web 用户界面更改网络配置或网络安全性属性。 • 更改 cfgRacTuneHttpsPort 属性(包括通过 config -f <配置文件> 进行更改时)。 • 使用 racresetcfg 或还原机箱配置备份。 • CMC 重设。 • 上载了新的 SSL 服务器证书。 我的 DNS 服务器没有注册我的 CMC? 有些 DNS 服务器最多只能注册含有 31 个字符的名称。 访问 CMC Web 界面时,显示一个安全警告,指出该 SSL 证书是由一家不可信的证书颁发机构颁发的。 CMC 包括一个默认的 CMC 服务器证书,以确保 Web 界面和远程 RACADM 功能的网络安全。该证书不是由可信证书颁发机构颁发 的。要解决此安全问题,请上载一个由可信证书颁发机构(例如 Thawte 或 Verisign)颁发的 CMC 服务
3 选中在 DNS 上注册 CMC 选项。 4 在 DNS CMC 名称字段中输入 CMC 名称。 5 单击应用更改。 Active Directory Active Directory 是否支持跨多个树进行 CMC 登录? CMC 的 Active Directory 查询算法支持单个目录林中的多个树。 使用 Active Directory 登录到 CMC 的操作是否可以在混合模式下进行(也就是说,目录林中的域控制器运行着不同的操作系统,比 如 Microsoft Windows 2000 或 Windows Server 2003)? 是。在混合模式中,CMC 查询过程使用的所有对象(比如用户、RAC 设备对象和关联对象)都必须处于同一域中。 如果处于混合模式,Dell 扩展的 Active Directory 用户和计算机管理单元将检查模式并限制用户以跨多个域创建对象。 配合使用 CMC 和 Active Directory 是否支持多个域环境? 是。域目录林功能级别必须处在本机 (Native) 或 Windows 2003 模式。此外,关联对象、RAC 用户对象和 RAC 设备对象(包
This feature card was activated with a different chassis. It must be removed before accessing the FlexAddress feature.
已正确安装 SD 卡并且已安装所有固件或软件更新。FlexAddress 处于活动状态,但服务器部署屏幕为何不显示部署选项?出了什么 问题? 这是浏览器高速缓存问题。请从浏览器注销并重新启动。 如果我需要使用 RACADM 命令 racresetcfg 重设我的机箱配置,FlexAddress 会发生什么情况? FlexAddress 功能仍然处于激活状态,随时可以使用。默认情况下会选择所有结构和插槽。 注: 在运行 RACADM 命令 racresetcfg 之前,强烈建议关闭机箱电源。 在仅禁用 FlexAddressPlus 功能(让 FlexAddress 仍然处于激活状态)之后,为何仍然活动的 CMC 上的 racadm setflexaddr 命令会 失败? 如果 CMC 后来变为活动,而 FlexAddressPlus 功能卡仍然留在卡插槽中,则 FlexAddressPlus 功能将被再次激活,而且插槽或结构 Flexaddress 配置更改可恢复。 IOM 在配置更改后,有时 CMC 将 IP 地址显示为 0.0.0.