Dell EMC PowerStore Handbuch für Softwareupgrades Version 2.x Juni 2021 Rev.
Hinweise, Vorsichtshinweise und Warnungen ANMERKUNG: Eine ANMERKUNG macht auf wichtige Informationen aufmerksam, mit denen Sie Ihr Produkt besser einsetzen können. VORSICHT: Ein VORSICHTSHINWEIS warnt vor möglichen Beschädigungen der Hardware oder vor Datenverlust und zeigt, wie diese vermieden werden können. WARNUNG: Mit WARNUNG wird auf eine potenziell gefährliche Situation hingewiesen, die zu Sachschäden, Verletzungen oder zum Tod führen kann. © 2020 - 2021 Dell Inc. oder ihre Tochtergesellschaften.
Inhaltsverzeichnis Weitere Ressourcen........................................................................................................................ 4 Kapitel 1: PowerStore-Softwareupgrades......................................................................................... 5 Kapitel 2: PowerStore T-Modell-Cluster........................................................................................... 6 Durchführen von Upgrades für PowerStore T-Modell-Cluster..................................
Vorwort Es werden regelmäßig neue Software- und Hardwareversionen veröffentlicht, um das Produkt kontinuierlich zu verbessern. Einige in diesem Dokument beschriebene Funktionen werden eventuell nicht von allen Versionen der von Ihnen derzeit verwendeten Software oder Hardware unterstützt. In den Versionshinweisen zum Produkt finden Sie aktuelle Informationen zu Produktfunktionen.
1 PowerStore-Softwareupgrades In diesem Dokument wird beschrieben, wie Sie ein Upgrade der Software auf Ihrem PowerStore-Cluster durchführen. Wenn Sie ein Softwareupgrade auf einem PowerStore-Cluster durchführen, werden die I/O-Vorgänge nicht beendet. Der unterbrechungsfreie Upgradeprozess verwendet redundante Pfade, um sicherzustellen, dass nicht mehr als ein Node zu einem bestimmten Zeitpunkt offline geschaltet wird. Ein einzelner PowerStore-Appliance-Node kann die I/O-Anforderungen erfüllen.
2 PowerStore T-Modell-Cluster Themen: • • • • Durchführen von Upgrades für PowerStore T-Modell-Cluster Bereitschaft zum Upgrade für PowerStore T-Modell-Cluster Durchführen des Health Check eines PowerStore T-Modell-Clusters vor dem Upgrade Aktualisieren der PowerStore T-Modell-Software Durchführen von Upgrades für PowerStore T-ModellCluster Um die neuesten Funktionen und Verbesserungen zu erhalten, führen Sie ein Upgrade der Software auf dem PowerStore T-ModellCluster auf die neueste verfügbare Version du
primären Appliance ein Failover zum Peer-Node der Appliance durchführt. Sie können sich wieder bei PowerStore Manager anmelden, nachdem der Node-Failover-Prozess abgeschlossen wurde. ANMERKUNG: Bei einem PowerStore-Cluster mit zwei Appliances wird die Verbindung zu PowerStore Manager getrennt, wenn die zweite Appliance den Failover-Prozess ausführt. Während des Failover-Prozesses für PowerStore-Cluster mit drei oder mehr Appliances erfolgt jedoch keine zweite Trennung von PowerStore Manager.
Schritte 1. Öffnen Sie PowerStore Manager. 2. Wählen Sie das Symbol Settings aus und wählen Sie dann Upgrades im Abschnitt Cluster aus. 3. Wenn das Softwareupgradepaket für PowerStore T-Modell nicht in PowerStore Manager hochgeladen wurde: a. Wählen Sie Upload Package aus. Das Dialogfeld Choose File to Upload wird angezeigt. b. Wählen Sie das Softwareupgradepaket für PowerStore T-Modellund dann die Option Open aus.
3 PowerStore X-Modell-Cluster Themen: • • • • • • • Durchführen von Upgrades für PowerStore X-Modell-Cluster Bereitschaft zum Upgrade für PowerStore X-Modell-Cluster Durchführen des Health Check eines PowerStore X-Modell-Clusters vor dem Upgrade Installieren des PowerStore X-Modell-Preupgrade-Pakets Installieren des Node-Firmwareupgrades für PowerStore X-Modell Aktualisieren der internen ESXi-Hosts von PowerStore Upgrade der PowerStore-Betriebssystem Durchführen von Upgrades für PowerStore X-ModellCluster
ANMERKUNG: Schließen oder aktualisieren Sie den Browser nicht, während das Softwareupgradepaket in PowerStore Manager hochgeladen wird. Wenn das Softwareupgradepaket für PowerStore X-Modell hochgeladen wurde, wird es in der Tabelle Software packages angezeigt. d. Wiederholen Sie die vorherigen zwei Schritte, um alle Softwareupgradepakete für PowerStore X-Modell in den PowerStore X-Modell-Cluster hochzuladen. 4.
● Die VMs, die auf ESXi-Hosts oder auf den VM-Festplatten ausgeführt werden, verwenden lokale ESXi-Hostlaufwerke. ANMERKUNG: Die lokalen ESXI-Hostlaufwerke sind nur für interne Systemkomponenten und nicht für Nutzerdaten vorgesehen. ● Die Gesamtmenge der Arbeitsspeicher- oder CPU-Nutzung auf VMs überschreitet die Menge, die auf einem einzelnen Node verfügbar ist. ● Die VMs können aus einem anderen Grund nicht automatisch migriert werden.
ANMERKUNG: Schließen oder aktualisieren Sie den Browser nicht, während das Softwareupgradepaket in PowerStore Manager hochgeladen wird. Das Softwareupgradepaket für PowerStore-Betriebssystem wird hochgeladen und in der Tabelle Software Packages angezeigt. 3. Wenn Sie bereit sind, den Health Check vor dem Upgrade durchzuführen, wählen Sie das Softwareupgradepaket für PowerStoreBetriebssystem in der Tabelle Software packages und dann die Option Health Check aus.
Installieren des Node-Firmwareupgrades für PowerStore X-Modell Verwenden Sie PowerStore Manager, um das Node-Firmwareupgradepaket auf einem PowerStore X-Modell-Cluster zu installieren. Voraussetzungen Stellen Sie sicher, dass mindestens sieben Tage vor der Installation des Node-Firmwarepakets auf dem PowerStore X-Modell-Cluster einen Health Check vor dem Upgrade durchgeführt wurde. Anweisungen dazu finden Sie unter Durchführen des Health Check eines PowerStore X-Modell-Clusters vor dem Upgrade auf Seite 11.
Wenn in den PowerStore – Versionshinweise angegeben ist, dass ESXi-Updates verfügbar oder erforderlich sind, führen Sie die folgenden Schritte aus, um die ESXi-Hosts im PowerStore X-Modell-Cluster zu aktualisieren: Schritte 1. Identifizieren Sie die primären und Peer-Nodes auf der primären Appliance des Clusters. Weitere Informationen finden Sie unter Minimierung von internen ESXi-Host-Failover-Ereignissen auf Seite 11. 2.
Nächste Schritte Navigieren Sie zu Upgrade der PowerStore-Betriebssystem auf Seite 15. Upgrade der PowerStore-Betriebssystem Verwenden Sie PowerStore Manager, um ein Upgrade der PowerStore-Betriebssystem durchführen. Voraussetzungen Stellen Sie sicher, dass mindestens sieben Tage vor dem Upgrade der PowerStore-Betriebssystem auf dem PowerStore X-ModellCluster einen Preupgrade-Health Check durchgeführt wurde.