Dell EMC PowerStore Руководство по работе с сетью для моделей PowerStore T Версия 2.x Июнь 2021 Ред.
Примечания, предупреждения и предостережения ПРИМЕЧАНИЕ: Пометка ПРИМЕЧАНИЕ указывает на важную информацию, которая поможет использовать данное изделие более эффективно. ОСТОРОЖНО: Указывает на возможность повреждения устройства или потери данных и подсказывает, как избежать этой проблемы. ПРЕДУПРЕЖДЕНИЕ: Указывает на риск повреждения оборудования, получения травм или на угрозу для жизни. © Корпорация Dell или ее дочерние компании, 2020-2021. Все права защищены.
Содержание Дополнительные ресурсы............................................................................................................6 Глава 1: Обзор...............................................................................................................................7 Общие сведения об устройстве Модель PowerStore T.......................................................................................... 7 Начальное развертывание Модель PowerStore T и настройка сети хранения................
Часть II: Добавление услуг по хранению.....................................................................................39 Глава 8: Общие сведения об услугах по хранению.................................................................40 Услуги хранения.........................................................................................................................................................40 Глава 9: Подготовка к настройке коммутаторов и сетей для услуг по хранению.....................
Создание сетей хранения iSCSI в PowerStore Manager...................................................................................74 Создание служб сетевой системы хранения данных (NAS) в PowerStore Manager.............................. 75 Приложение A: Расширение сети хранения для работы на нескольких портах........................... 76 Расширение сети хранения..........................................................................................................................................
Предисловие Для улучшения продуктов периодически выпускаются обновленные версии программного обеспечения и оборудования. Некоторые функции, описанные в этом документе, поддерживаются не всеми версиями программного обеспечения или оборудования, которые используются на данный момент. Примечания к выпуску продукта содержат последние обновленные сведения о функциях продукта. Если продукт работает ненадлежащим образом либо не так, как описано в этом документе, обратитесь к своему поставщику услуг.
1 Обзор Эта глава включает следующую информацию. Темы: • • • Общие сведения об устройстве Модель PowerStore T Начальное развертывание Модель PowerStore T и настройка сети хранения Поддерживаемые коммутаторы Общие сведения об устройстве Модель PowerStore T Поддержка блочных (сети хранения данных (SAN)) и файловых (сетевая система хранения данных (NAS)) нагрузок, а также нагрузок Virtual Volume (VVol) с программным стеком, развернутым непосредственно на платформе без операционной системы.
Таблица 1. Варианты развертывания Модель PowerStore T Вариант развертывания Протоколы и сервисы Требования к коммутатору Инструкции по заказу нового модуля защиты кэш-памяти см. в разделе Начальное развертывание Подключение с помощью протокола Fibre Channel (FC) Хотя бы один управляющий коммутатор Часть 1.
Таблица 2. Ресурсы документации по PowerSwitch (продолжение) Документ Справочные материалы Местоположение https://www.dell.
I Начальное развертывание В этом разделе содержится информация о завершении начального развертывания Модель PowerStore T.
2 Общие сведения о начальном развертывании Модель PowerStore T Темы: • Начальное развертывание Модель PowerStore T Начальное развертывание Модель PowerStore T Для начального развертывания Модель PowerStore T требуется настройка управляющего коммутатора и сети управления. После настройки управляющего коммутатора и его подключения к узлам Модель PowerStore T вы сможете обнаружить устройство Модель PowerStore T и настроить сети в мастере начальной настройки PowerStore Manager.
3 Подготовка к настройке управляющего коммутатора и сетей Эта глава включает следующую информацию. Темы: • • Резервирование сетевых ресурсов для начального развертывания Заполните обязательные поля в таблице начальной настройки Резервирование сетевых ресурсов для начального развертывания Обратитесь к администратору сети для заполнения следующих двух таблиц и резервирования ресурсов, необходимых для начального развертывания устройства Модель PowerStore T.
Таблица 3. Таблица подготовки сети управления (продолжение) Шаг Описание шага Примечания IP-адрес управления для управляющего коммутатора Шлюз по умолчанию Сервер NTP 8. Запишите идентификатор агрегированного канала для управляющего коммутатора. 9. После выполнения действий, описанных выше, вы соберете необходимую информацию для настройки коммутаторов.
Таблица 4. Таблица начальной настройки (пустая) (продолжение) Унификация (блочные и файловые системы хранения данных по умолчанию) или оптимизация для блоков Сервисные коды устройств Сбой одного диска Введите сервисный код. Сервисный код указывается на бирке черного цвета на лицевой стороне базового шасси. При получении системы определите базовые шасси, которые вы хотите настроить в качестве кластера, и запишите их сервисные коды.
Таблица 4. Таблица начальной настройки (пустая) (продолжение) Запишите IP-адреса для своих серверов DNS и NTP. Рекомендуется указать по меньшей мере два адреса для сервера DNS и два адреса для сервера NTP. Сервер DNS Сервер NTP Информация об управляющем коммутаторе по дополнительному каналу (управляющем коммутаторе) Управляющий коммутатор 1 Управляющий коммутатор 2 Для коммутаторов можно предоставить учетные данные только для чтения.
4 Требования к коммутатору и сети для начального развертывания Эта глава включает следующую информацию. Темы: • • • • Требования к управляющему коммутатору Типы сетей, необходимых для начального развертывания Варианты сети VLAN при начальном развертывании Требования к IP-адресу для начального развертывания Требования к управляющему коммутатору Для всех развертываний Модель PowerStore T требуется развертывание хотя бы с одним управляющим коммутатором по дополнительному каналу.
PowerStore T Management Switch Network Topology Management Switch Port Channel Port 0 Port 1 Port 1 Port 0 Node A Node B Mgmt Mgmt PowerStore T Appliance Legend: 10 Gb 1 Gb Рисунок 1. Топология сети управляющего коммутатора ПРИМЕЧАНИЕ: Для удаленного обнаружения Модель PowerStore T порты управляющего коммутатора должны поддерживать трафик непомеченной собственной сети VLAN. На следующей схеме показано, где на узлах базового шасси Модель PowerStore T расположены порты управления.
Подключения управляющего коммутатора к восходящему каналу связи На следующем рисунке показан пример управляющего коммутатора, подключенного к двум устройствам восходящего канала связи уровня 3. Для обоих подключений используется агрегированный канал, который обеспечивает увеличенную пропускную способность и резервирование.
PowerStore T Logical Networks Management Upstream Management switch PowerStore T Management Subnets Management Remote Discovery Рисунок 4. Трафик логической сети Модель PowerStore T Весь трафик передается через выделенный порт управления 1 GbE на узле базового шасси. Убедитесь в том, что Модель PowerStore T может осуществлять обмен данными через подсети, приведенные выше.
Варианты сети VLAN при начальном развертывании На следующих схемах показаны примеры различных вариантов сети VLAN для начального развертывания Модель PowerStore T. PowerStore T – Untagged Management VLAN Management Management switch PowerStore T Sample ID 100 100 Traffic Remote Discovery PowerStore Management Untagged Traffic Tagged Traffic Subnet 169.254.x.x/16 y.y.y.y/24 Рисунок 5.
PowerStore T – Tagged Management VLAN Management Upstream Management switch PowerStore T Sample ID 100 101 Traffic PowerStore Management Remote Discovery Untagged Traffic Tagged Traffic Subnet y.y.y.y/24 169.254.x.x/16 Рисунок 6. Сети Модель PowerStore T с помеченной сетью VLAN управления Если сеть VLAN управления помечена, удаленное обнаружение Модель PowerStore T выполняется через собственную сеть VLAN, а административный трафик проходит через помеченную сеть VLAN.
ПРИМЕЧАНИЕ: Рекомендуется зарезервировать дополнительные IP-адреса для добавления дополнительных устройств в будущем. Сети хранения Во время начального развертывания требования сети хранения к IP-адресу отсутствуют. Однако вам потребуется IP-адрес для сетей хранения при их добавлении в PowerStore Manager, REST API или интерфейс командной строки позднее. См. раздел Добавление услуг по хранению.
5 Настройка систем Dell серии PowerSwitch для начального развертывания Эта глава включает следующую информацию.
Получение заполненной таблицы подготовки сети управления Для заполнения таблицы подготовки сети управления обратитесь к администратору сети. Таблица подготовки сети управления ниже была заполнена с помощью сетевых ресурсов, которые использовались в примерах настройки, приведенных в настоящем документе. Если для настройки сетей не применяются ресурсы, показанные в данном руководстве, можно заполнить новую Таблицу подготовки сети управления, используя ресурсы, используемые в вашей среде.
Шаги по настройке управляющего коммутатора для начального развертывания Для начального развертывания требуется не менее одного управляющего коммутатора. В этом документе описываются шаги по развертыванию Модель PowerStore T в одном кластере, который состоит из одного устройства с одним базовым шасси, подключенным к управляющему коммутатору Dell S4148 серии PowerSwitch. Шаги по настройке управляющего коммутатора: 1. 2. 3. 4. Создание сеанса терминала с управляющим коммутатором.
● имя пользователя — admin; ● пароль — admin. 7. Перейдите в режим глобальной настройки. configure terminal 8. Рекомендуется изменить пароль после первого входа в коммутатор. Используйте следующую команду для изменения пароля коммутатора. username admin password role sysadmin Проверка версии и лицензии коммутатора Перед настройкой коммутатора и сетей проверьте версию операционной системы и лицензию коммутатора.
Настройка управляющего коммутатора Если вы развертываете Модель PowerStore T, выполните следующие шаги для настройки управляющего коммутатора в дополнительном канале. На каждом управляющем коммутаторе необходимо предусмотреть следующие порты, которые будут доступны для подключения к Модель PowerStore T: ● 2 порта для подключения к управляющему коммутатору восходящего канала связи. ● 2 порта для подключения к Модель PowerStore T. ● Опционально: 1 порт для удаленного обнаружения. 1.
no shutdown switchport mode access switchport access vlan 100 exit interface ethernet 1/1/53 description "PowerStoreNodeB_MgmtPort" no shutdown switchport mode access switchport access vlan 100 exit 10. Создайте агрегированный канал для восходящих каналов связи. Таблица 9.
2 1 Рисунок 7. Подключение устройства базового шасси к управляющему коммутатору Таблица 10. Шаги по подключению управляющего коммутатора к узлам базового шасси 1 Подключите порт управления 1GbE нижнего узла (A) к порту 2 управляющего коммутатора. 2 Подключите порт управления 1GbE верхнего узла (B) к порту 53 управляющего коммутатора. Подключение управляющего коммутатора к управляющему восходящему каналу связи Управляющий коммутатор необходимо подключить к управляющему восходящему каналу связи.
Layer 3 – Management Uplinks Management Uplink A Management Uplink B 2 1 Рисунок 8. Подключение управляющего коммутатора к управляющему восходящему каналу связи Таблица 11. Шаги по подключению управляющего коммутатора к управляющему восходящему каналу связи 1 Подключите порт 25 управляющего коммутатора к управляющему восходящему каналу связи A. 2 Подключите порт 26 управляющего коммутатора к управляющему восходящему каналу связи B.
Eth 1/1/26 Eth 1/1/53 Uplink_Ports up PowerStoreNod.. up 100G 1000M full full A 100 - 3. Проверьте конфигурацию агрегированного канала.
6 Обнаружение устройств PowerStore В этом приложении содержится следующая информация. Темы: • • Обнаружение при прямом подключении Обнаружение при удаленном подключении Обнаружение при прямом подключении Это рекомендуемая процедура, которая подразумевает ваше обязательное присутствие в местоположении, где установлено базовое шасси. ● Скачайте и запустите Средство проверки сети (NVT) PowerStore, чтобы проверить правильность настройки сетей.
Node Network B A Рисунок 9. Возможности удаленного обнаружения Модель PowerStore T Существует два способа обнаружения, которые можно выбрать: ● Удаленное обнаружение с помощью средства обнаружения ● Удаленное обнаружение с помощью статического IP-адреса Удаленное обнаружение с помощью средства обнаружения Вы можете выполнить обнаружение PowerStore с помощью средства обнаружения, объявляющего IP-адрес 169.254.xx/16.
● Скачайте и запустите Средство проверки сети (NVT) PowerStore, чтобы проверить правильность конфигурирования сетей. NVT можно скачать на странице Dell EMC Central Solutions по адресу https://psapps.emc.com/central/solution/NVTPowerStore. ● Убедитесь, что рабочая станция или виртуальная машина подключены непосредственно к тому же коммутатору, что и базовое шасси, или находятся в той же виртуальной ЛС, что и встроенная/немаркированная сеть сетевого подключения управления PowerStore.
7 Начальная настройка устройства Модель PowerStore T Эта глава включает следующую информацию. Темы: • • Мастер начальной настройки Получение заполненной таблицы начальной настройки Мастер начальной настройки После обнаружения устройства Модель PowerStore T, вы будете перенаправлены в Initial Configuration Wizard (ICW) для настройки сетей на устройстве Модель PowerStore T.
○ Управление хранилищем на основе политик Подробнее см. в разделе Руководство по инфраструктуре виртуализации PowerStore. Получение заполненной таблицы начальной настройки Для заполнения таблицы начальной настройки обратитесь к администратору сети. Следующая таблица заполнена с использованием ресурсов, настроенных на стоечном коммутаторе верхнего уровня Dell EMC S4148-ON серии PowerSwitch.
Таблица 12. Таблица начальной настройки (заполненная) (продолжение) всех типов дисков и точек емкости. Но двойная отказоустойчивость накопителя может обеспечить более высокую устойчивость и защиту. Сбой двух дисков Убедитесь, что на шасси есть следующее количество твердотельных накопителей: ● Не менее 6 для одноуровневой отказоустойчивости накопителя ● 7 для двухуровневой отказоустойчивости накопителя ПРИМЕЧАНИЕ: После установки уровень отказоустойчивости накопителя для устройства изменить невозможно.
Таблица 12. Таблица начальной настройки (заполненная) (продолжение) Пароль коммутатора Password123! — Информация о vCenter (необязательно) Запишите свои существующие учетные данные администратора для входа в vCenter. Рабочий процесс начальной настройки автоматически создаст центр обработки данных и кластер ESXi и свяжет их с вашим кластером. ПРИМЕЧАНИЕ: Убедитесь, что сервер vCenter доступен в сети.
II Добавление услуг по хранению В этом разделе содержится информация о подготовке коммутаторов и настройке коммутаторов Dell EMC серии PowerSwitch Модель PowerStore T для дополнительных протоколов и сервисов.
8 Общие сведения об услугах по хранению В этой главе содержится следующая информация Темы: • Услуги хранения Услуги хранения После первоначального развертывания устройства Модель PowerStore T настроены для Fibre Channel. Вы можете добавить услуги по хранению после начального развертывания.
9 Подготовка к настройке коммутаторов и сетей для услуг по хранению Эта глава включает следующую информацию. Темы: • • Таблица ресурсов коммутатора для услуг по хранению Таблица настройки сети хранения Таблица ресурсов коммутатора для услуг по хранению Обратитесь к администратору сети, чтобы заполнить таблицу ресурсов коммутатора для услуг по хранению и зарезервировать необходимые ресурсы для настройки двух стоечных коммутаторов верхнего уровня (ToR), необходимых для услуг по хранению.
Таблица 13. Таблица ресурсов коммутатора для услуг по хранению (пустая) (продолжение) Шаг Описание шага Примечания Внутренняя (непомеченный) NAS (только для унифицированных развертываний) 4. Зарезервируйте и запишите IP-адреса, необходимые для настройки следующих коммутаторов ToR. IP-адрес управления для коммутатора ToR 1 IP-адрес управления для коммутатора ToR 2 Шлюз по умолчанию Сервер NTP 5.
Таблица 13. Таблица ресурсов коммутатора для услуг по хранению (пустая) (продолжение) Шаг Описание шага Примечания При развертывании с MC-LAG (VLT) введите идентификатор агрегированного канала, используемый для восходящего канала связи. Для MC-LAG требуется только один идентификатор агрегированного канала. Кроме того, можно записать идентификаторы агрегированных каналов восходящей связи, необходимые для восходящих каналов связи L2 без MC-LAG.
Таблица 14. Таблица настройки сети хранения (пустая) (продолжение) Ресурс Рекомендуется выбрать создание этого IP-адреса. Он используется в качестве единого плавающего IP-адреса с высокой доступностью для хостов для удобного обнаружения ресурсов хранения данных в кластере.
10 Требования к коммутатору и сети для развертываний с коммутаторами ToR В этой главе содержится следующая информация.
PowerStore Network Topology with Top of Rack Switches and MC-LAG Interconnect Upstream Switch 2 Upstream Switch 1 Port Channel Top of Rack Switch 1 Port 0 MC-LAG Interconnect Port 1 Top of Rack Switch 2 Port 1 Node A Port 0 Node B PowerStore T Appliance Legend: 10 Gb 1 Gb Рисунок 10.
ПРИМЕЧАНИЕ: Расположение портов для надежных восходящих каналов связи может отличаться в зависимости от поставщика коммутатора или модели. MC-LAG — это технология межсоединения коммутаторов, которая позволяет соединить несколько независимых стоечных коммутаторов верхнего уровня (ToR) с одним виртуальным шасси. MC-LAG позволяет группам портов агрегирования каналов связи (LAG) охватывать несколько шасси, обеспечивая лучшую отказоустойчивость LAG-подключения.
PowerStore Network Topology with a no MC-LAG interconnect Upstream Switch 2 Upstream Switch 1 Port Channels Top of Rack Switch 1 Port 0 Top of Rack Switch 2 Port 1 Port 1 Node A Port 0 Node B PowerStore T Appliance Legend: 10 Gb 1 Gb Рисунок 11.
ПРИМЕЧАНИЕ: Расположение портов для надежных восходящих каналов связи может отличаться в зависимости от поставщика коммутатора или модели. Для подключения L2 без MC-LAG требуются резервные высокоскоростные подключения.
PowerStore T – Production Subnets Production ToR 1 ToR 2 PowerStore T Production Subnets Storage NAS Internal Рисунок 13. Сетевой трафик для Модель PowerStore T с услугами по хранению Убедитесь в том, что Модель PowerStore T может осуществлять обмен данными через сети VLAN, приведенные выше. Чтобы проверить правильность маршрутизации всех данных на уровне L2 и/или L3 для всех используемых сетей, обратитесь к документации вашего поставщика сети Модель PowerStore T. Таблица 17.
Таблица 17. Настройка сетей Модель PowerStore T при добавлении услуг по хранению (продолжение) подсеть Описание Транспортные порты узлов Серверы NAS являются необязательными. Если вы будете использовать сервисы NAS, необходимо выбрать режим Unified в Модель PowerStore T Initial Configuration Wizard. Передача данных по внутренней сети осуществляется Первые 2 порта 4-портовой платы во встроенной виртуальной ЛС. Внутренняя сеть (логический сетевой интерфейс используется для следующих целей.
PowerStore T – Management Network is Untagged Production ToR 1 ToR 2 PowerStore T Sample ID 200 300 102 Traffic Subnet PowerStore Storage NAS Servers Internal Untagged Traffic Tagged Traffic y.y.y.y/24 y.y.y.y/24 Internal IPv6 addressing Рисунок 14. Трафик хранилища и NAS ПРИМЕЧАНИЕ: Серверы NAS доступны только в унифицированном развертывании. При наличии нескольких серверов NAS можно использовать несколько сетей VLAN.
Таблица 18. Требования к IP-адресу сети хранения (продолжение) IP-адреса на Назначено для Требуемое количество IP-адресов Кластер IP-адрес глобального обнаружения хранилища (необязательно) 1 Сетям хранения можно назначить адреса IPv4 или IPv6. Нельзя назначить различные версии IP-адресов одной сети. ПРИМЕЧАНИЕ: Рекомендуется зарезервировать дополнительные IP-адреса для добавления дополнительных устройств в будущем.
11 Настройка Модель PowerStore T со стоечными коммутаторами верхнего уровня Dell S4148 серии PowerSwitch Эта глава включает следующую информацию.
Таблица 19. Ресурсы для установки систем Dell серии PowerSwitch (продолжение) Системы Dell EMC серии PowerSwitch Подключено Руководство по установке Dell EMC PowerSwitch серии S5200F-On https://www.dell.com/support/manuals/en-us/networking-s5224fon/s5200-on_install_pub/one-half-u-front-rack-installation? guid=guid-70a5c88e-3b65-422c-afd0-e9e1293877a2&lang=en-us Если вы не выполняете развертывание устройства Модель PowerStore T, то пошаговые инструкции по установке коммутаторов в шкаф см.
Таблица 20. Таблица ресурсов коммутатора для услуг по хранению (заполненная) (продолжение) Шаг Описание шага Примечания 2. Определите, какие из портов стоечного коммутатора верхнего уровня (ToR) будут подключены к Модель PowerStore T узлам базового шасси устройства. Как минимум порты 0 и 1 на узле должны быть подключены к ToR-коммутаторам.
Таблица 20. Таблица ресурсов коммутатора для услуг по хранению (заполненная) (продолжение) Шаг Описание шага Примечания ПРИМЕЧАНИЕ: MAC-адрес VLT не может состоять только из нулей (00:00:00:00:00). 8. 9. 10.
2. Используйте последовательный кабель для подключения компьютера к последовательному порту консоли — верхний порт, расположенный на стороне PSU коммутатора PowerSwitch. Serial Console Port Management Port 3. Откройте программу эмуляции терминала на компьютере, например PuTTY. 4. Настройте последовательное подключение в программе эмуляции терминала с использованием следующих параметров. Таблица 21.
3. Убедитесь, что на коммутаторе установлена лицензия. Выполните команду show license status , чтобы отобразить установленную лицензию. В поле License Type: должно быть указано следующее: PERPETUAL. Если у вас установлена оценочная лицензия, лицензии, приобретенные у Dell EMC, доступны для скачивания на странице Dell Digital Locker (www.dell.com/support/software/).
5. При необходимости настройте маршрут управления (шлюз по умолчанию) для коммутатора. management route 0.0.0.0/0 100.0.100.1 6. Настройте сервер NTP для коммутатора. ntp server 100.0.100.200 7. Включите протокол высокоскоростного связующего дерева (RSTP) на коммутаторе. spanning-tree mode rstp 8. Настройте приоритет связующего дерева на коммутаторе.
3. Отключите режим L2 на портах 100 GbE, которые будут использоваться для VLTi на коммутаторе 1. interface range ethernet 1/1/25-1/1/26 description VLTi no switchport exit 4. Создайте новый домен VLTi и выберите порты 100 GbE в качестве интерфейсов обнаружения. vlt-domain 1 discovery-interface ethernet 1/1/25-1/1/26 ● vlt-domainи номера портов должны быть одинаковы для обоих коммутаторов. ● Порты 25 и 26 коммутатора Dell EMC S4148-ON серии PowerSwitch являются портами 100 GbE.
Настройка собственной сети VLAN Модель PowerStore T в стоечных коммутаторах верхнего уровня ПРИМЕЧАНИЕ: Настройка удаленного обнаружения и сетей VLAN управления осуществляется в управляющем коммутаторе. 1. Установите подключение терминала с первым коммутатором ToR (коммутатор 1). 2. Перейдите в режим глобальной настройки. configure terminal 3. Создайте внутреннюю сеть. interface vlan 1 description Internal_Network no shutdown exit 4. Повторите эти шаги для второго коммутатора ToR (коммутатор 2).
6. Создайте агрегированный канал VLT для портов узла B. interface port-channel 20 description "LACP port channel for Node B" vlt-port-channel 20 7. Настройте собственную сеть VLAN для портов узла B и коммутатора ToR 1. no shutdown switchport mode trunk switchport access vlan 1 8. Настройте порты, подключенные к узлам Модель PowerStore T, в качестве пограничных портов протокола связующего дерева (STP). spanning-tree port type edge exit 9.
Коммутатор 1 Коммутатор 2 flowcontrol receive off flowcontrol transmit off exit interface ethernet 1/1/54 channel-group 20 mode active flowcontrol receive off flowcontrol transmit off exit flowcontrol receive off flowcontrol transmit off exit interface ethernet 1/1/54 channel-group 20 mode active flowcontrol receive off flowcontrol transmit off exit copy running-configuration startupconfiguration copy running-configuration startupconfiguration Настройка портов восходящего канала связи в стоечных комму
switchport access vlan 1 switchport trunk allowed vlan 200 vlt-port-channel 30 interface ethernet 1/1/29 description Uplink_Ports no shutdown channel-group 30 mode active no switchport flowcontrol receive off flowcontrol transmit off interface ethernet 1/1/30 description Uplink_Ports no shutdown channel-group 30 mode active no switchport flowcontrol receive off flowcontrol transmit off copy running-configuration startup-configuration Настройка стоечных коммутаторов верхнего уровня для сетей хранения iSCSI
Таблица 23.
Таблица 24.
12 Подключение коммутаторов ToR Dell серии PowerSwitch для услуг по хранению В этой главе содержится следующая информация. Темы: • • • Подсоедините базовое шасси к коммутаторам ToR Соединение ToR-коммутаторов между собой Подключение стоечных коммутаторов верхнего уровня к основным восходящим каналам связи Подсоедините базовое шасси к коммутаторам ToR Подсоедините узлы к стоечным коммутаторам верхнего уровня (ToR). 2 4 1 Рисунок 15.
Соединение ToR-коммутаторов между собой При двойном развертывании коммутаторов PowerStore с использованием VLT необходимо, чтобы два стоечных коммутатора верхнего уровня (ToR) были подключены друг к другу. 1 2 Рисунок 16. Подключение коммутатор-коммутатор Используйте два кабеля, поддерживающих соединение между высокоскоростными портами, например 100Gbps Direct Attached (DAC). Таблица 26.
Core uplinks Uplink A 1 3 Uplink B 4 2 Рисунок 17. Подключение коммутатора ToR Dell EMC S4148-ON серии PowerSwitch к основным восходящим каналам связи Таблица 28. Действия для подключения коммутаторов ToR Dell EMC S4148-ON серии PowerSwitch к основным восходящим каналам связи 1 Подключите порт 30 нижнего коммутатора ToR к основному восходящему каналу связи A. 2 Подключите порт 29 нижнего коммутатора ToR к основному восходящему каналу связи B.
13 Проверка настройки системы серии PowerSwitch с коммутаторами ToR Эта глава включает следующую информацию.
300 Active 4094 Inactive T Po10,Po20,Po30 T Eth1/1/1,1/1/54 T Po10,Po20,Po30 T Po1000 NAS_Network 5.
No mismatch VLT VLAN mismatch: No mismatch 9. Проверьте конфигурацию порта VLT.
14 Настройка сетей хранения и NAS в PowerStore Manager Эта глава включает следующую информацию. Темы: • • Создание сетей хранения iSCSI в PowerStore Manager Создание служб сетевой системы хранения данных (NAS) в PowerStore Manager Создание сетей хранения iSCSI в PowerStore Manager После настройки коммутаторов ToR для услуг по хранению необходимо создать сети хранения для поддержки iSCSI в PowerStore Manager. PowerStore поддерживает до 32 сетей хранения — не более 8 на один порт платы с 4 портами.
Таблица 29. Таблица конфигурации сети хранения для одной сети (заполненная) (продолжение) Ресурс Примечания Для каждой добавляемой сети хранения необходимо зарезервировать не менее двух IP-адресов. IP-адреса в сети хранения используются для целей и инициаторов iSCSI и дополнительный IP-адрес для IP-адреса глобального обнаружения хранилища Map Storage for Appliance для порта (включая порт для каждого устройства, с которым будет сопоставлено хранилище) Bond0 1.
A Расширение сети хранения для работы на нескольких портах В приложении содержится следующая информация. Темы: • Расширение сети хранения Расширение сети хранения Сеть хранения можно расширить для работы на нескольких портах устройства Модель PowerStore T. Для выполнения шагов по расширению сети хранения вам потребуется следующая информация.
В следующем примере используется порт 2 платы с 4 портами. Однако вы можете выбрать использование порта 3 или любого порта модуля ввода-вывода, если узлы настроены с одним из них. Как показано на схеме, при подключении узлов к коммутаторам ToR нижний узел (A) и верхний узел (B) должны быть подключены к противоположным коммутаторам. 2 1 Рисунок 18. Подключение дополнительного порта 1. Подключите порт 2 нижнего узла (A) к порту 2 нижнего коммутатора (1). 2.
3. Настройте VLAN сети хранения для работы через порт 2 коммутатора ToR 1. interface ethernet 1/1/2 switchport mode trunk switchport trunk allowed vlan 200 no shutdown exit 4. Повторите шаги 1–3 для порта 53 на коммутаторе ToR 2. Таблица 31.
B Создание дополнительной сети хранения В этом приложении содержится следующая информация. Темы: • Создание новой сети хранения Создание новой сети хранения Вы можете настроить до 32 сетей хранения — не более 8 сетей на один порт платы с 4 портами или модуль ввода-вывода на узле. Для выполнения шагов по созданию новой сети хранения вам потребуется следующая информация.
Для использования этих инструкций сеть хранения и коммутаторы ToR должны быть настроены так, как описано в разделе Добавление услуг по хранению. В следующем примере используется порт 2 платы с 4 портами. Однако вы можете выбрать использование порта 3 или любого порта модуля ввода-вывода, если узлы настроены с одним из них. Как показано на схеме, при подключении узлов к коммутаторам ToR нижний узел (A) и верхний узел (B) должны быть подключены к противоположным коммутаторам. 1 2 Рисунок 19.
3. Настройте сеть хранения на коммутаторе ToR 1. interface vlan 210 description Storage_Network2 exit 4. Настройте сеть хранения для работы через порт 2 на коммутаторе ToR 1. interface ethernet 1/1/2 switchport mode trunk switchport trunk allowed vlan 210 no shutdown 5. Повторите шаг 1 для порта 53 на коммутаторе ToR 2. Таблица 33.
C Настройка модели PowerStore T с коммутаторами ToR и без межсоединения VLT Это приложение включает следующую информацию. Темы: • Шаги по настройке Модель PowerStore T с коммутаторами ToR без VLT Шаги по настройке Модель PowerStore T с коммутаторами ToR без VLT Ниже приведены действия, которые необходимо выполнить для развертывания Модель PowerStore T с двумя стоечными коммутаторами верхнего уровня без объединения виртуальных каналов.
D Другие операции по настройке Dell EMC серии PowerSwitch В этом приложении содержится следующая информация. Темы: • • • Сервисы Dell EMC SmartFabric Восстановление заводских настроек коммутатора Текущая конфигурация системы серии PowerSwitch, используемая в развертываниях Модель PowerStore T Сервисы Dell EMC SmartFabric Сервисы Dell EMC SmartFabric позволяют комплексной сетевой топологии с уровнем автоматизации задач до 98% упростить и ускорить сетевые операции по расширению кластера и сети.
Текущая конфигурация системы серии PowerSwitch, используемая в развертываниях Модель PowerStore T Используйте следующую команду для создания файла текущей конфигурации, если коммутаторы Dell S4148 серии PowerSwitch используются в качестве управляющих коммутаторов и стоечных коммутаторов верхнего уровня (ToR): show running-configuration Пример текущей конфигурации управляющего коммутатора ! Version 10.4.1.4 ! Last configuration change at Mar 19 04:19:20 2020 ! snmp-server contact http://www.dell.
switchport access vlan 1 flowcontrol receive off flowcontrol transmit off ! interface ethernet1/1/4 shutdown switchport access vlan 1 flowcontrol receive off flowcontrol transmit off ! interface ethernet1/1/5 shutdown switchport access vlan 1 flowcontrol receive off flowcontrol transmit off ! interface ethernet1/1/6 shutdown switchport access vlan 1 flowcontrol receive off flowcontrol transmit off ! interface ethernet1/1/7 shutdown switchport access vlan 1 flowcontrol receive off flowcontrol transmit off !
flowcontrol receive off flowcontrol transmit off ! interface ethernet1/1/16 shutdown switchport access vlan 1 flowcontrol receive off flowcontrol transmit off ! interface ethernet1/1/17 shutdown switchport access vlan 1 flowcontrol receive off flowcontrol transmit off ! interface ethernet1/1/18 shutdown switchport access vlan 1 flowcontrol receive off flowcontrol transmit off ! interface ethernet1/1/19 shutdown switchport access vlan 1 flowcontrol receive off flowcontrol transmit off ! interface ethernet1/1
interface ethernet1/1/29 no shutdown switchport access vlan 1 flowcontrol receive off flowcontrol transmit off ! interface ethernet1/1/30 no shutdown switchport access vlan 1 flowcontrol receive off flowcontrol transmit off ! interface ethernet1/1/31 shutdown switchport access vlan 1 flowcontrol receive off flowcontrol transmit off ! interface ethernet1/1/32 shutdown switchport access vlan 1 flowcontrol receive off flowcontrol transmit off ! interface ethernet1/1/33 shutdown switchport access vlan 1 flowcon
shutdown switchport access vlan 1 flowcontrol receive off flowcontrol transmit off ! interface ethernet1/1/42 shutdown switchport access vlan 1 flowcontrol receive off flowcontrol transmit off ! interface ethernet1/1/43 shutdown switchport access vlan 1 flowcontrol receive off flowcontrol transmit off ! interface ethernet1/1/44 shutdown switchport access vlan 1 flowcontrol receive off flowcontrol transmit off ! interface ethernet1/1/45 shutdown switchport access vlan 1 flowcontrol receive off flowcontrol t
no shutdown switchport access vlan 100 flowcontrol receive off flowcontrol transmit off ! interface ethernet1/1/54 shutdown switchport access vlan 1 flowcontrol receive off flowcontrol transmit off ! interface mgmt1/1/1 no shutdown no ip address dhcp ip address 100.0.100.50/24 ipv6 address autoconfig ! management route 0.0.0.0/0 100.0.100.1 ! support-assist Таблица 35. Пример текущей конфигурации стоечных коммутаторов верхнего уровня (ToR) Коммутатор 1 Коммутатор 2 ! Version 10.4.1.
Таблица 35.
Таблица 35.
Таблица 35.
Таблица 35.
Таблица 35.
Таблица 35. Пример текущей конфигурации стоечных коммутаторов верхнего уровня (ToR) Коммутатор 1 Коммутатор 2 ! vlt-domain 1 backup destination 100.0.100.11 discovery-interface ethernet1/1/25-1/1/26 peer-routing primary-priority 1 vlt-mac 00:00:00:00:00:01 support-assist ! vlt-domain 1 backup destination 100.0.100.