Dell EMC PowerStore Настройка сетевых папок SMB 2.x Июнь 2021 Ред.
Примечания, предупреждения и предостережения ПРИМЕЧАНИЕ: Пометка ПРИМЕЧАНИЕ указывает на важную информацию, которая поможет использовать данное изделие более эффективно. ОСТОРОЖНО: Указывает на возможность повреждения устройства или потери данных и подсказывает, как избежать этой проблемы. ПРЕДУПРЕЖДЕНИЕ: Указывает на риск повреждения оборудования, получения травм или на угрозу для жизни. © Корпорация Dell или ее дочерние компании, 2020-2021. Все права защищены.
Содержание Дополнительные ресурсы............................................................................................................4 Глава 1: Обзор.............................................................................................................................. 5 Поддержка SMB..................................................................................................................................................................5 Вопросы планирования.............................
Предисловие Для улучшения продуктов периодически выпускаются обновленные версии программного обеспечения и оборудования. Некоторые функции, описанные в этом документе, поддерживаются не всеми версиями программного обеспечения или оборудования, которые используются на данный момент. Примечания к выпуску продукта содержат последние обновленные сведения о функциях продукта. Если продукт работает ненадлежащим образом либо не так, как описано в этом документе, обратитесь к своему поставщику услуг.
1 Обзор В этой главе содержатся следующие разделы: Темы: • • Поддержка SMB Вопросы планирования Поддержка SMB Модель PowerStore T поддерживает SMB 1 – SMB 3.1.1. Если на сервере NAS включена поддержка SMB, можно создавать файловые системы с поддержкой SMB. Сервер NAS с поддержкой SMB может быть изолированным или подключенным к домену Active Directory. Серверы NAS, подключенные к домену, по умолчанию размещаются в организационной единице OU=Computers, OU=EMC NAS Servers.
Создание сетей VLAN и IP-адресов необязательно для серверов NAS. Если вы планируете создать сеть VLAN для серверов NAS, сеть VLAN нельзя будет использовать совместно с другими сетями управления или хранения Модель PowerStore T. Кроме того, не забудьте обратиться к сетевому администратору, чтобы зарезервировать сетевые ресурсы и настроить сеть на коммутаторе. Подробные сведения представлены в Руководство по работе с сетью PowerStore для моделей PowerStore T.
2 Создание серверов NAS В этой главе содержатся следующие разделы: Темы: • • • Общие сведения о настройке серверов NAS Создание сервера NAS для файловых систем SMB (только для Windows) Изменение настроек сервера NAS Общие сведения о настройке серверов NAS Прежде чем приступить к предоставлению файловых систем хранения данных на устройстве Модель PowerStore T, в системе необходимо запустить сервер NAS.
Экран мастера Описание Выберите SMB. ПРИМЕЧАНИЕ: При выборе обоих протоколов SMB и NFS на сервере NAS автоматически включается поддержка нескольких протоколов. В данном документе настройка нескольких протоколов не описывается. Windows Server Settings Выберите Standalone, чтобы создать автономный сервер SMB, или Join to the Active Directory Domain, чтобы создать сервер SMB, входящий в состав домена.
● Выберите User Mapping, чтобы разрешить серверу использовать автоматическое сопоставление либо учетную запись по умолчанию для несопоставленных учетных записей/пользователей Windows. 5. На странице Protection & Events включите или отключите NDMP. Дополнительные сведения см. в разделе Включение защиты данных и событий NDMP. 6. На вкладке Безопасность можно делать следующее.
3 Дополнительные функции сервера NAS В этой главе содержатся следующие разделы: Темы: • • • • Настройка протокола общего доступа FTP или SFTP Настройка сетей сервера NAS Включение защиты данных и событий NDMP Настройка безопасности сервера NAS Настройка протокола общего доступа FTP или SFTP После создания сервера NAS можно настроить FTP или FTP поверх SSH (SFTP). Предварительные условия Протокол FTP в пассивном режиме не поддерживается.
Настройка файловых интерфейсов для сервера NAS После добавления сервера NAS в PowerStore для него можно настроить файловые интерфейсы. Об этой задаче Можно добавить дополнительные файловые интерфейсы и определить предпочтительный интерфейс для использования. Также можно определить, какой интерфейс следует использовать для инфраструктуры и резервного копирования либо для IPv4 или IPv6. Действия 1. Выберите Storage > NAS Servers > [nas server]. 2.
Включение защиты данных и событий NDMP Стандартное резервное копирование для серверов NAS можно настроить с использованием NDMP. Протокол NDMP обеспечивает стандарт для резервного копирования файловых серверов в сети. Если он включен, приложение для управления данными (DMA) стороннего производителя, например Dell EMC Networker, может обнаружить NDMP PowerStore с помощью IP-адреса сервера NAS. Об этой задаче NDMP включается после создания сервера NAS. PowerStore поддерживает: ● Трехсторонний протокол NDMP.
Сведения о Common AntiVirus Agent (CAVA) Программа Common AntiVirus Agent (CAVA) — антивирусное решение для клиентов, которые используют сервер NAS. В решении используется протокол файловой системы SMB, соответствующий отраслевому стандарту, в среде Microsoft Windows Server. В средстве CAVA для выявления известных вирусов и предотвращения заражения ими файлов в СХД используется антивирусное программное обеспечение стороннего производителя.
4 Создание файловых систем и сетевых папок SMB В этой главе содержатся следующие разделы: Темы: • • Создание файловой системы Создание сетевой папки SMB Создание файловой системы Чтобы можно было создать сетевую папку SMB, необходимо создать на сервере NAS файловую систему. Предварительные условия Убедитесь в наличии сервера NAS, настроенного для поддержки протокола SMB согласно описанию в разделе Настройка серверов NAS. Действия 1. Выберите Storage > File Systems и нажмите Create. 2.
Параметр Описание Policy — политика защиты При необходимости укажите политику защиты данных для файловой системы. ПРИМЕЧАНИЕ: PowerStore поддерживает моментальные снимки для защиты файловой системы хранения данных. Для файловых систем защита данных репликации не поддерживается.
Таблица 2. Дополнительные параметры файловой системы для SMB (продолжение) Параметр Описание информацию или информацию упреждающего чтения, до тех пор, пока файл не будет закрыт; после этого сервер должен быть обновлен любыми изменениями, внесенными в состояние файла (содержимое и атрибуты). ● Пакетная нежесткая блокировка информирует клиент о том, что этот файл открыт только данным клиентом.
Параметр Описание Advanced SMB Properties Включите один или несколько дополнительных параметров SMB. ● Непрерывная доступность ● Шифрование протокола ● Access-based Enumeration ● Кэш-память филиала включена Решите, какие объекты доступны, когда сетевая папка находится в автономном режиме. Подробные сведения см. в разделе Дополнительные свойства SMB. Следующие действия После создания сетевой папки ее можно изменить из PowerStore или с помощью консоли управления Microsoft.
Таблица 3. Advanced SMB Properties (продолжение) Параметр Описание ● Programs and files opened by users, optimize for performance. Все файлы, открываемые клиентами из сетевой папки, автоматически кэшируются и становятся доступными в автономном режиме. При возможности клиенты открывают эти файлы из локальной кэш-памяти сетевой папки, даже когда подключены к сети. Данный вариант рекомендуется для исполняемых программ. ● None. Кэширование автономных файлов на стороне клиента не настроено.
5 Дополнительные функции файловой системы В этой главе содержатся следующие разделы: Темы: • Квоты файловой системы Квоты файловой системы Чтобы иметь возможность отслеживать и ограничивать использование дискового пространства, следует настроить квоты для файловых систем на уровне файловой системы или каталога. Включать и отключать квоты можно в любой момент, но рекомендуется включать или отключать их в непиковое время во избежание негативного влияния на работу файловой системы.
Таблица 5. Жесткие и мягкие ограничения (продолжение) Описания Type При достижении жесткого ограничения для квоты пользователя в файловой системе или дереве квот пользователь не сможет осуществлять запись данных в файловую систему или дерево, пока не станет доступно больше пространства. При достижении жесткого ограничения для дерева квот ни один пользователь не сможет осуществлять запись данных в дерево, пока не станет доступно больше пространства.
Предварительные условия Необходимо включить квоты и задать значения квоты пользователей по умолчанию, прежде чем добавлять квоты пользователей в файловую систему. См. раздел Включение квот пользователей. ПРИМЕЧАНИЕ: Создать квоты для файловых систем, доступных только для чтения, невозможно. Действия 1. Выберите Storage > File Systems > [файловая система] > Quotas > User. 2. На странице User Quota выберите Add. 3. В мастере Add User Quota укажите запрашиваемые сведения.