Dell EMC PowerStore Konfigurieren von Volumes 2.x Juni 2021 Rev.
Identifier Version Status GUID-5B8DE7B7-879F-45A4-88E0-732155904029 15 Translation Validated Hinweise, Vorsichtshinweise und Warnungen ANMERKUNG: Eine ANMERKUNG macht auf wichtige Informationen aufmerksam, mit denen Sie Ihr Produkt besser einsetzen können. VORSICHT: Ein VORSICHTSHINWEIS warnt vor möglichen Beschädigungen der Hardware oder vor Datenverlust und zeigt, wie diese vermieden werden können.
Inhaltsverzeichnis Weitere Ressourcen........................................................................................................................ 4 Kapitel 1: Volumes...........................................................................................................................5 Volumes in PowerStore-Appliances.................................................................................................................................... 5 Thin provisioning.........................
Vorwort Identifier Version Status GUID-F5B0A9D3-2EAE-447C-B4C3-40E0927AC5F4 3 Translation in review Es werden regelmäßig neue Software- und Hardwareversionen veröffentlicht, um das Produkt kontinuierlich zu verbessern. Einige in diesem Dokument beschriebene Funktionen werden eventuell nicht von allen Versionen der von Ihnen derzeit verwendeten Software oder Hardware unterstützt. In den Versionshinweisen zum Produkt finden Sie aktuelle Informationen zu Produktfunktionen.
1 Identifier Version Status GUID-27435C56-5A18-491E-9F73-0E09B36541B1 4 Translation in review Volumes Ein Volume ist eine einzelne Einheit, die eine bestimmte Speichermenge darstellt. Volume-Storage-Ressourcen ermöglichen Hosts über netzwerkbasierte iSCSI-, Fibre Channel- und NVMe-over-Fibre Channel-Verbindungen den Zugriff auf allgemeinen Speicher auf Blockebene.
Die folgende Liste beschreibt einige wichtige Überlegungen bei der Erstellung von Volumes: ● Ihr System erstellt Volumes als Thin Volumes. ● Wenn ein Volume erstellt wird, bestimmt der Resource Balancer, auf welcher Appliance das Volume bereitgestellt wird, es sei denn, das Volume wurde einem bestimmten Host/einer bestimmten Hostgruppe zugeordnet. In solchen Fällen wird das Volume nur auf einer Appliance erstellt, die diese(n) Host/Hostgruppe erkennt. ● Volumes können eine Größe von 1 MB bis 256 TB haben.
ANMERKUNG: Außerdem können Sie Volumes erstellen, wenn Sie eine neue Volume-Gruppe erstellen. 3. Geben Sie im Slide-Out-Fenster Create Volumes die folgenden Volume-Informationen ein: ● Name (or Prefix): Wenn Sie ein einzelnes Volume erstellen, ist dies der Name des Volume. Wenn Sie mehrere Volumes erstellen, ist dies der Basisname, an den eine Zahl angehängt wird. ● Quantity: Sie können bis zu 100 Volumes mit denselben Eigenschaften hinzufügen.
Identifier Version Status GUID-372F7B5C-D42A-4F59-B106-490C4550D5C5 3 Translation in review Ändern von Volume-Eigenschaften Schritte 1. Wählen Sie unter Storage die Option Volumes. 2. Aktivieren Sie das Kontrollkästchen neben dem Namen des Volumes, und klicken Sie dann auf Modify. ANMERKUNG: Sie können auch auf den Bereich Properties zugreifen, indem Sie zum Öffnen der Seite „Volume“ auf den Namen des Volumes und dann auf Actions > Properties klicken.
Schritte 1. Wählen Sie unter Storage die Option Volumes. 2. Klicken Sie auf das Kontrollkästchen neben dem Volume, das Sie ändern möchten. Sie können mehrere Volumes löschen, indem Sie die Kontrollkästchen aller zu löschenden Volumes aktivieren. 3. Wählen Sie Löschen aus. Identifier Version Status GUID-4A7A7E5B-46DE-4AD5-A81C-16894B8CD513 3 Translation in review Zuweisen einer Schutz-Policy Eine Schutz-Policy legt Snapshot- und Datenreplikationsregeln für die Data Protection fest.
● Geplante Snapshots und Replikationen, die auf den Policy-Regeln basieren, werden angehalten. ● Vorhandene Snapshots verbleiben und werden gemäß den bei der Erstellung festgelegten Snapshot-Regeln im System aufbewahrt. Wenn das Volume Mitglied einer geschützten Volume-Gruppe ist, kann die Zuweisung der Schutz-Policy auf Volume-Ebene nicht aufgehoben werden. Schritte 1. Wählen Sie unter Storage die Option Volumes. 2. Aktivieren Sie das Kontrollkästchen neben dem entsprechenden Volume. 3.
2 Identifier Version Status GUID-CE8FB2A8-4CD9-4824-8F2D-41071040B27C 3 Translation in review Übersicht über Volume-Gruppen Eine Volume-Gruppe ist ein logischer Container für eine Gruppe von Volumes. Eine Volume-Gruppe dient als zentraler Verwaltungspunkt für mehrere Speicherressourcen, die als Einheit zusammenarbeiten. Sie können Volume-Gruppen verwenden, um Folgendes zu erreichen: 1. Eine nutzerfreundlichere Methode zum Managen und Überwachen von Ressourcen 2.
ANMERKUNG: Nachdem Sie einer Volume-Gruppe eine Schutz-Policy zugewiesen haben, kann sie nicht auf Mitgliederebene geändert werden. Identifier Version Status GUID-CCE7AE37-ED99-4545-8F21-F8CA7A3AA5B7 3 Translation in review Erstellen einer Volume-Gruppe Voraussetzungen Alle Mitglieder einer Volume-Gruppe müssen auf einer einzigen Appliance gehostet werden. Schritte 1. Wählen Sie unter Storage die Option Volume Groups aus. 2. Klicken Sie auf Create. 3.
2. Aktivieren Sie das Kontrollkästchen neben der Volume-Gruppe, der Sie Volumes hinzufügen möchten. 3. Wählen Sie More Actions > Add Existing Volumes aus. ANMERKUNG: Sie können das Slide-Out-Fenster Add Existing Volumes auch über die Registerkarte Members der VolumeGruppe öffnen. 4. Wählen Sie im Slide-Out-Fenster Add Existing Volumes die Volumes aus, die der Gruppe hinzugefügt werden sollen. 5. Klicken Sie auf Anwenden.
Identifier Version Status GUID-DF916BBE-D8C7-4FD6-9D98-51F80836FAB8 1 Translation in review Zuordnen von Volumes in einer Volume-Gruppe zu einem Host Info über diese Aufgabe Sie können einem Host oder einer Hostgruppe mehrere Volumes zuordnen, die Mitglieder einer Volume-Gruppe sind. ANMERKUNG: Die Zuordnung eines Hosts zu einer Volume-Gruppe ist aus Gründen der Zweckmäßigkeit aktiviert. Die Zuordnung erfolgt für die einzelnen Volumes in der Gruppe und nicht für das Volume-Gruppenobjekt selbst.
Schritte 1. Wählen Sie unter Storage die Option Volume groups aus. 2. Klicken Sie auf der Seite Volume Groups auf den Namen der Volume-Gruppe, aus der Sie das Volume entfernen möchten. 3. Klicken Sie auf die Registerkarte Members und dann auf das Kontrollkästchen für den Namen des zu entfernenden Volumes. 4. Klicken Sie auf More Actions > Remove.
3 Identifier Version Status GUID-05E07B1F-347A-4B9F-A858-247894A1CA9E 2 Translation in review Hosts und Hostgruppenkonfigurationen Hostkonfigurationen sind logische Verbindungen, über die Hosts oder Anwendungen auf Speicherressourcen zugreifen. Bevor ein Host auf Speicher zugreifen kann, müssen Sie eine Konfiguration für den Host definieren und ihn mit einer Speicherressource verknüpfen. Sie können einzelne Hosts in einer Hostgruppe zusammenfassen.
● den Typ des Hostbetriebssystems ● iSCSI-Initiator-IQNs, FC-Initiator-WWNs und NVMe-Initiator-NQNs für die Initiatoren, die der Host für den Zugriff auf Speicher verwenden soll. Info über diese Aufgabe Bevor Sie einen Host für den Zugriff auf Speicher auf Ihrem Cluster zuweisen können, müssen Sie in PowerStore Manager eine Konfiguration für ihn definieren. Schritte 1. Wählen Sie unter Compute die Option Hosts & Host Groups aus. 2. Klicken Sie auf Add Host. 3.
Info über diese Aufgabe Es gelten folgende Einschränkungen: ● Nachdem ein Volume einem Host zugeordnet wurde, nutzt es dasselbe Storage-Protokoll (SCSI oder NVMe) wie der Host, dem es zugeordnet ist. ● Gemischte Protokolle werden nicht unterstützt. Schritte 1. Aktivieren Sie unter Compute > Hosts & Host Groups das Kontrollkästchen neben dem Host oder der Hostgruppe, dem/der Sie Volumes zuordnen möchten. 2. Wählen Sie Provision > Map aus, um das Slide-Out-Fenster Map Volumes zu öffnen. 3.
4 Identifier Version Status GUID-09C9F278-929C-493A-AC2B-02DFCDDEE33F 1 Translation approved Datenmobilität für Volumes und VolumeGruppen Starten Sie eine Migrationssitzung, um ein Volume oder eine Volume-Gruppe in eine andere Appliance zu verschieben.
Das Slide-Out-Fenster Migrate wird angezeigt. 4. Wählen Sie eine Appliance aus, die die Anforderungen für die Storage-Ressource, die Sie migrieren, am besten erfüllt. 5. Klicken Sie auf Next. Eine Migrationssitzung mit dem Status „Ausstehend“ wird im Hintergrund erstellt. 6. Wählen Sie Finish aus. Die Migrationssitzung wird auf der Seite Migration Actions angezeigt und anschließend wird das Slide-Out-Fenster Required Action for Migration angezeigt. ANMERKUNG: Überprüfen Sie ggf.
5 Identifier Version Status GUID-BD5033CA-D7F3-4DF9-B94F-E0EB4E516815 2 Translation in review Thin Clones Ein Thin Clone ist eine Lese-Schreib-Kopie eines Volume, einer Volume-Gruppe, oder eines Snaphots, die gemeinsame Blöcke mit der übergeordneten Ressource haben. Daten, die auf der Quelle zum Zeitpunkt der Erstellung des Thin Clone verfügbar sind, sind für den Thin Clone sofort verfügbar. Der Thin Clone referenziert den Quell-Snapshot für diese Daten.
Tabelle 1. Thin Clone-Terminologie Begriff Definition Quelle Ein Volume, eine Volume-Gruppe oder ein Snapshot eines Volumes oder einer VolumeGruppe, das/die als Quelle für die Erstellung und Aktualisierung von Thin Clones verwendet wird. Die Quelle kann sich ändern, wenn der Clone aktualisiert wird. Basis-Volume, Basis-Volume-Gruppe, Basis-Speichercontainer (Produktions)-Volume, -Volume-Gruppe oder -Storage-Container als Grundlage für abgeleitete Snapshots und Thin Clones.
Abbildung 1. Thin-Clone-Hierarchie 1. Volume1 2. Snapshot 1 3. Snapshot 2 4. Thin Clone1 5.
6. Snapshot 3 7. Thin Clone3 8. Aktualisieren Die Basis-Volume-Familie für Volume 1 umfasst alle Snapshots und Thin Clones, die im Diagramm dargestellt sind. Für Thin Clone 2: ● Die Produktreihe ist Volume 1. ● Das übergeordnete Element ist Snapshot 2. ● Die Quelle ist Snapshot 2. Für Thin Clone 3: ● Die Produktreihe ist Volume 1. ● Das übergeordnete Element ist Snapshot 3. ● Die Quelle ist Snapshot 3. Wenn nun Thin Clone 3 von Snapshot 1 aktualisiert wird: ● Die Produktreihe ist weiterhin Volume 1.
6 Identifier Version Status GUID-D0F6937F-C5A0-4913-983F-1B11B2D01A3E 2 Translation in review Performance-Policies Eine Performance-Policy legt die I/O-Performanceanforderungen für PowerStore-Speicherressourcen fest. PowerStore bietet drei vordefinierte Performance-Policies: ● High ● Mittel (Standard) ● Niedrig PowerStore verfügt über freigabebasierte QoS.
Identifier Version Status GUID-3EB3D53B-21C0-41DB-A8E5-0189AFF31714 2 Translation in review Ändern der Performance-Policy für ein Volume Schritte 1. Wählen Sie unter Storage die Option Volumes. 2. Aktivieren Sie das Kontrollkästchen neben dem entsprechenden Volume. 3. Wählen Sie More Actions > Change Performance Policy aus. 4. Wählen Sie die Performance-Policy im Slide-Out-Fenster Change Performance Policy aus.