Dell EMC PowerStore Konfigurieren von SMB-Freigaben 2.x Juni 2021 Rev.
Hinweise, Vorsichtshinweise und Warnungen ANMERKUNG: Eine ANMERKUNG macht auf wichtige Informationen aufmerksam, mit denen Sie Ihr Produkt besser einsetzen können. VORSICHT: Ein VORSICHTSHINWEIS warnt vor möglichen Beschädigungen der Hardware oder vor Datenverlust und zeigt, wie diese vermieden werden können. WARNUNG: Mit WARNUNG wird auf eine potenziell gefährliche Situation hingewiesen, die zu Sachschäden, Verletzungen oder zum Tod führen kann. © 2020 - 2021 Dell Inc. oder ihre Tochtergesellschaften.
Inhaltsverzeichnis Weitere Ressourcen........................................................................................................................ 4 Kapitel 1: Überblick......................................................................................................................... 5 SMB-Unterstützung..............................................................................................................................................................5 Überlegungen zur Planung.......
Vorwort Es werden regelmäßig neue Software- und Hardwareversionen veröffentlicht, um das Produkt kontinuierlich zu verbessern. Einige in diesem Dokument beschriebene Funktionen werden eventuell nicht von allen Versionen der von Ihnen derzeit verwendeten Software oder Hardware unterstützt. In den Versionshinweisen zum Produkt finden Sie aktuelle Informationen zu Produktfunktionen.
1 Überblick In diesem Kapitel werden die folgenden Informationen behandelt: Themen: • • SMB-Unterstützung Überlegungen zur Planung SMB-Unterstützung PowerStore T-Modell unterstützt SMB 1 bis SMB 3.1.1. Wenn die SMB-Unterstützung auf dem NAS-Server aktiviert ist, können Sie SMB-fähige Dateisysteme erstellen. Der NAS-Server mit SMB-Unterstützung kann entweder eigenständig sein oder über die Active Directory-Domain verbunden werden.
Das Erstellen von Netzwerk-VLANs und IP-Adressen ist für NAS-Server optional. Wenn Sie beabsichtigen, ein VLAN für NAS-Server zu erstellen, kann das VLAN nicht für die PowerStore T-Modell-Verwaltung oder für Storage-Netzwerke freigegeben werden. Stellen Sie außerdem sicher, dass Sie mit Ihrem Netzwerkadministrator zusammenarbeiten, um die Netzwerkressourcen zu reservieren und das Netzwerk auf dem Switch zu konfigurieren.
2 Erstellen von NAS-Servern In diesem Kapitel werden die folgenden Informationen behandelt: Themen: • • • Übersicht über die Konfiguration von NAS-Servern Erstellen eines NAS-Servers für SMB-Dateisysteme (nur Windows) Ändern von NAS-Servereinstellungen Übersicht über die Konfiguration von NAS-Servern Damit Sie Datei-Storage auf der PowerStore T-Modell-Appliance bereitstellen können, muss ein NAS-Server auf dem System ausgeführt werden.
Assistentenfenster Beschreibung ANMERKUNG: Wenn Sie sowohl ein SMB- als auch ein NFS-Protokoll auswählen, wird der NAS-Server zur Unterstützung von Multiprotokoll automatisch aktiviert. Die Multiprotokollkonfiguration wird in diesem Dokument nicht beschrieben. Windows Server-Einstellungen Wählen Sie Standalone aus, um einen eigenständigen SMB-Server zu erstellen, oder wählen Sie Join to the Active Directory Domain aus, um einen SMB-Server als Domainmitglied zu erstellen.
Weitere Informationen finden Sie unter Konfigurieren des FTP-Freigabeprotokolls. ● Wählen Sie User Mapping aus, um dem Server die Verwendung der automatischen Zuordnung für nicht zugeordnete WindowsKonto/-Nutzer oder des Standardkontos für nicht zugeordnete Windows-Kontonutzer zu ermöglichen. 5. Aktivieren oder deaktivieren Sie NDMP auf der Seite Protection & Events. Weitere Informationen finden Sie unter Aktivieren von NDMP-Schutz und -Ereignissen. 6.
3 Zusätzliche Funktionen des NAS-Servers In diesem Kapitel werden die folgenden Themen behandelt: Themen: • • • • Konfigurieren des FTP- oder SFTP-Freigabeprotokolls Konfigurieren von NAS-Servernetzwerken Aktivieren von NDMP-Schutz und -Ereignissen Konfigurieren der NAS-Serversicherheit Konfigurieren des FTP- oder SFTP-Freigabeprotokolls Sie können FTP oder SFTP (FTP over SSH) konfigurieren, nachdem der NAS-Server erstellt wurde. Voraussetzungen Der passive FTP-Modus wird nicht unterstützt.
Konfigurieren von Dateischnittstellen für einen NAS-Server Sie können die Dateischnittstellen für einen NAS-Server konfigurieren, nachdem der Server zu PowerStore hinzugefügt wurde. Info über diese Aufgabe Sie können weitere Dateischnittstellen hinzufügen und festlegen, welche Sie bevorzugt verwenden möchten. Außerdem können Sie festlegen, welche Schnittstelle für Produktions- und Backupzwecke oder für IPv4 bzw. IPv6 verwendet werden soll. Schritte 1.
Anwendung (Data Management Application) eines Drittanbieters, z. B. Dell EMC Networker, das PowerStore-NDMP über die IP-Adresse des NAS-Servers erkennen. Info über diese Aufgabe Die Aktivierung von NDMP erfolgt nach der Erstellung des NAS-Servers. PowerStore unterstützt: ● Drei-Wege-NDMP. Die Daten werden durch die DMA über ein lokales Netzwerk (LAN) oder ein Wide Area Network (WAN) übertragen. ● Komplette und inkrementelle Backups. Schritte 1.
Virenschutzsoftware ist wichtig, auch wenn das Speichersystem aufgrund seiner Architektur gegen das Eindringen von Viren resistent ist. Der NAS-Server führt mithilfe eines eingebetteten Betriebssystems den Datenzugriff in Echtzeit aus. Drittanbieter können auf diesem Betriebssystem keine Programme ausführen, die Viren enthalten. Obwohl die Betriebssystemsoftware gegen Viren geschützt ist, muss auf Windows-Clients, die auf das Speichersystem zugreifen, ebenfalls ein Virenschutz installiert sein.
4 Erstellen von Dateisystemen und SMBFreigaben In diesem Kapitel werden die folgenden Themen behandelt: Themen: • • Erstellen eines Dateisystems Erstellen einer SMB-Freigabe Erstellen eines Dateisystems Auf dem NAS-Server muss ein Dateisystem erstellt werden, damit Sie eine SMB-Freigabe erstellen können. Voraussetzungen Vergewissern Sie sich, dass ein NAS-Server für die Unterstützung des SMB-Protokolls konfiguriert wurde, wie unter Konfigurieren von NAS-Servern beschrieben. Schritte 1.
Option Beschreibung Protection Policy (Schutz-Policy) Geben Sie optional eine Schutz-Policy für das Dateisystem an. ANMERKUNG: PowerStore unterstützt Snapshots für Datei-Storage-Schutz. Der Replikationsschutz wird für Dateisysteme nicht unterstützt. Wenn eine Schutz-Policy für Replikations- und Snapshot-Schutz festgelegt ist, wird in PowerStore die Snapshot-Policy auf dem Dateisystem implementiert und die Replikations-Policy für das Dateisystem ignoriert.
Tabelle 2. Erweiterte Dateisystemeinstellungen für SMB (fortgesetzt) Einstellung Beschreibung Dieser Mechanismus verringert den Netzwerkverkehr, da Clients auf diese Weise die irrelevanten Anfragen zum Schließen und Öffnen überspringen können. Benachrichtigung bei Schreibvorgang aktiviert Aktivieren Sie die Benachrichtigung bei Schreibvorgängen in ein Dateisystem. Benachrichtigung bei Zugriff aktiviert Aktivieren Sie die Benachrichtigung bei Zugriffen auf ein Dateisystem.
Um die Freigabe in PowerStore zu ändern, wählen Sie sie auf der Seite SMB Share in der Liste aus und klicken Sie auf Modify. Erweiterte SMB-Share-Eigenschaften Sie können die folgenden erweiterten SMB-Share-Eigenschaften konfigurieren, wenn Sie eine SMB-Share erstellen oder ihre Eigenschaften ändern: Tabelle 3.
5 Weitere Dateisystemfunktionen In diesem Kapitel werden die folgenden Informationen behandelt: Themen: • Dateisystem-quotas Dateisystem-quotas Sie können die Belegung des Laufwerksspeichers durch Konfigurieren von Quoten für Dateisysteme auf Dateisystem- oder Verzeichnisebene begrenzen und nachverfolgen. Sie können Quotas jederzeit aktivieren oder deaktivieren.
Tabelle 5. Harte und weiche Limits (fortgesetzt) Typ Beschreibung Der Nutzer darf Speicherplatz belegen, bis das Ende einer Toleranzperiode erreicht ist. Der Nutzer wird benachrichtigt, wenn das weiche Limit erreicht wurde, bis die Toleranzperiode abgelaufen ist. Danach wird die Bedingung „Out of space“ erreicht und bleibt bestehen, bis der Nutzer wieder das weiche Limit einhält.
3. Geben Sie im Assistenten Add User Quota die erforderlichen Informationen ein. Um den Speicherplatzverbrauch ohne Festlegung von Limits nachzuverfolgen, legen Sie Soft Limit und Hard Limit auf 0 fest (was kein Limit bedeutet). 4. Wählen Sie Add. Hinzufügen einer Quotenstruktur zu einem Dateisystem Info über diese Aufgabe Erstellen Sie eine Quotenstruktur auf der Verzeichnisebene eines Dateisystems, um den durch dieses Verzeichnis belegten gesamten Speicherplatz zu begrenzen oder nachzuverfolgen.