Setup Guide

Figure 10. Out-of-band management switch uplink connections

Types of networks required for Block-optimized (FC-

only) deployments

PowerStore T model requires all networks to be unique. It is highly recommended to deploy PowerStore T model with multiple

and unique VLANs to separate the traffic. However, if only one VLAN is available, you have the option to deploy PowerStore T

model with a single VLAN and multiple unique subnets as demonstrated below.

The following networks must be configured on the out-of-band management switch for Block-optimized (FC-only) deployments.

Switch and network requirements for Block-optimized (FC-only) deployments