Setup Guide

Table 7. PowerStore T model Block-optimized IP address requirements (continued)
Network IP Addresses Required
NOTE: If you want to add the Storage networks later in PowerStore Manager, REST API, or CLI".
See the Dell EMC PowerStore Clustering and High Availability White Paper for details.
For details see the Initial Configuration Worksheet.
You can choose to assign either IPv4 or IPv6 addresses to the management network. You cannot assign different IP versions to
the same network, for example, all 4 IPs assigned to the management network must all be either IPv4 or IPv6.
NOTE: It is recommended that you reserve extra IP addresses to accommodate adding more appliances in the future.
Switch and network requirements for Block-optimized (FC-only) deployments 21