Setup Guide
Table 9. Initial Configuration Worksheet for Block-optimized (FC-only) deployments with no ToR
switches (completed) (continued)
Default Username
admin
Default Password Password123#
Cluster Details
For resource management, efficiency, and availability purposes, appliances act as a single component called cluster.
Cluster Name PowerStoreTCluster
Appliance Service Tags
The service tag appears on
the black tag on the front of
the base enclosure. When the
systems arrive, identify the
base enclosures that you
want to configure together as
a cluster, and record their
service tags.
CNR42W2
Networks
Your cluster requires a dedicated set of IP addresses for each type of network.
NOTE: VLAN information for management, storage, vMotion, and NAS networks are optional and default to 0. It is a
marker used to indicate that the network traffic is not tagged and native VLAN is applied through the switch. For better
security and performance, it is recommended that you specify VLAN information for each type of network.
Ensure that you configure a unique subnet for each type of network.
Management Network
Connects the cluster to services such as DNS and NTP. The IP addresses in the management
network are used to address the cluster, appliances, controllers, and internal hosts.
4 IPs for each PowerStore
T model Appliance
6 IPs for each PowerStore
X model Appliance
Cluster IP Address 192.168.1.10
VLAN
(Optional, Defaults to 0)
Netmask/Prefix Length Gateway IP Addresses
0
255.255.255.0/24 192.168.1.1 192.168.1.11-13
Storage Network (Optional)
Enables clients to access the storage in the cluster. The IP addresses in the storage network
are used for iSCSI targets, iSCSI initiators, and the Global Storage Discovery IP address. If you
want to enable iSCSI interfaces later or only use Fibre Channel, you can skip this step.
NOTE: At a minimum, you need 6 IP addresses for each PowerStore X model appliance.
However, for performance improvements, it is highly recommended that you have 10 IP
addresses for each PowerStore X model appliance.
2 IPs for each PowerStore
T model Appliance
6 or 10 IPs for each
PowerStore X model
Appliance
Global Storage Discovery IP Address
The last IP address you specify here is used as the Global Storage Discovery IP address.
It is recommended that you choose to create this IP address. It is used as the single highly
available floating IP address for hosts to easily discover storage from your cluster.
N/A
VLAN
(Optional, Defaults to 0)
Netmask/Prefix Length Gateway IP Addresses
N/A N/A N/A N/A
24 Configuring Dell PowerSwitch Series for Block-optimized (FC-only) deployments