Setup Guide
exit
ntp server 100.0.100.200
exit
interface ethernet 1/1/2
description "PowerStoreNodeA_MgmtPort"
no shutdown
switchport mode access
switchport access vlan 100
exit
interface ethernet 1/1/53
description "PowerStoreNodeB_MgmtPort"
no shutdown
switchport mode access
switchport access vlan 100
exit
interface port-channel 10
description Uplink
no shutdown
switchport mode trunk
switchport access vlan 1
switchport trunk allowed vlan 100
exit
interface ethernet 1/1/25
description Uplink
no shutdown
channel-group 10 mode active
no switchport
flowcontrol receive off
flowcontrol transmit off
exit
interface ethernet 1/1/26
description Uplink
no shutdown
channel-group 10 mode active
no switchport
flowcontrol receive off
flowcontrol transmit off
exit
exit
Cable the out-of-band management switch
Cable the out-of-band (OOB) management switch to the appliance base enclosure nodes and the management uplink.
Figure 12. Base enclosure appliance connection to the OOB management switch
30
Configuring Dell PowerSwitch Series for Block-optimized (FC-only) deployments