Setup Guide

5. Validate the link layer discovery protocol (LLDP) configuration
show lldp neighbors
Loc PortID Rem Host Name Rem Port Id Rem Chassis Id
--------------------------------------------------------------------------------------
ethernet1/1/1 Not Advertised a0:36:9f:d4:fb:2e
a0:36:9f:d4:fb:2e
ethernet1/1/2 Dell EMC PowerStore 00:60:16:9d:02:5c cyc-coreos
ethernet1/1/25 MGMT-01 ethernet1/1/31
68:4f:64:68:c7:1d
ethernet1/1/26 MGMT-02 ethernet1/1/31
68:4f:64:58:9f:a5
ethernet1/1/53 Dell EMC PowerStore 00:60:16:9e:e6:2c cyc-coreos
mgmt1/1/1 MGMT-01 ethernet1/1/41
68:4f:64:68:c7:1d
6. Review the running configuration for the oob switch.
show running-configuration
For an example of the running configuration output see Running configuration of PowerSwitch Series used in PowerStore T
model deployments.
Network Validation Tool for PowerStore
Optionally, you can run the Network Validation Tool (NVT) for PowerStore after configuring your switches.
The NVT is available for download from Dell EMC Central Solutions (https://psapps.emc.com/central/solutions).
You must have an online support account to download the NVT. You can create an account from www.dell.com/support.
Once you have downloaded the NVT, see the Network Validation Tool for PowerStore UserGuide.pdf, which is downloaded in
the zip file with the NVT.
Validate the out-of-band management switch configuration
33