Setup Guide

Initial Configuration Worksheet
This appendix includes the following information.
Topics:
Initial Configuration Worksheet (Blank)
Initial Configuration Worksheet (Blank)
Work with your network administrator to complete the Initial Configuration Worksheet. Once completed the worksheet will
provide the necessary information to setup up the networks during initial configuration of PowerStore T model.
Table 29. Initial Configuration Worksheet (blank)
Initial Login Information
Use the following default user credentials when you log in to the PowerStore Manager for the first time.
Default Username admin
Default Password Password123#
Cluster Details
For resource management, efficiency, and availability purposes, appliances act as a single component called cluster.
Cluster Name
Appliance Service Tags
The service tag appears on
the black tag on the front of
the base enclosure. When the
systems arrive, identify the
base enclosures that you
want to configure together as
a cluster, and record their
service tags.
Networks
Your cluster requires a dedicated set of IP addresses for each type of network.
NOTE: VLAN information for management, storage, vMotion, and NAS networks are optional and default to 0. It is a
marker used to indicate that the network traffic is not tagged and native VLAN is applied through the switch. For better
security and performance, it is recommended that you specify a unique VLAN information for each type of network.
If you are deploying into a single VLAN, ensure that you configure a unique subnet for each type of network.
Cluster IP Address
Management Network
Connects the cluster to services such as DNS and NTP. The IP addresses in the management
network are used to address the cluster, appliances, controllers, and internal hosts.
3 IPs for each PowerStore
T model Appliance
5 IPs for each PowerStore
X model Appliance
VLAN
(Optional, Defaults to 0)
Netmask/Prefix Length Gateway IP Addresses
A
Initial Configuration Worksheet 73