Setup Guide

Other Dell EMC PowerSwitch Series

configuration operations

This appendix contains the following information.

Topics:

• Reset the switch to factory settings

• Running configuration of PowerSwitch Series used in PowerStore T model deployments

Reset the switch to factory settings

If necessary, you can reset the Dell PowerSwitch Series running OS10 Enterprise Edition (OS10EE) to the default factory

settings.

NOTE: If you reset the switch, all the existing configuration will be lost, and if the switch is being used, there will be a

disruption in traffic.

When a Dell PowerSwitch Series is reset to the factory default settings:

● Telnet is disabled

● SSH is enabled

● DHCP is enabled

● The default switch username and password are both admin.

NOTE: Dell recommends changing the admin password during the first login.

OS10# delete startup-configuration

Proceed to delete startup-configuration [confirm yes/no(default)]:y

OS10# reload

System configuration has been modified. Save? [yes/no]:n

Proceed to reboot the system? [confirm yes/no]:y

Running configuration of PowerSwitch Series used in

PowerStore T model deployments

Use the following command to generate a running configuration file when PowerSwitch Series are used for the out-of-band

management and Top-of-Rack (ToR) switches:

show running-configuration

Example of running configuration for the OOB management switch

! Version 10.4.1.4

! Last configuration change at Mar 19 04:19:20 2020

snmp-server contact http://www.dell.com/support

hostname oobMgmtSwitch

interface breakout 1/1/25 map 100g-1x

interface breakout 1/1/26 map 100g-1x

80 Other Dell EMC PowerSwitch Series configuration operations