Administrator Guide

1094 DHCP Server and Relay Settings
The DHCP L2 relay feature permits L3 relay agent functionality in layer-2
switched networks. The switch supports L2 DHCP relay configuration on
individual ports, link aggregation groups (LAGs) and VLANs. For information
about layer-2 and layer-3 DHCP Relay, see "Layer-2 and Layer-3 Relay
Features " on page 1157.
Default DHCP Server Values
By default, the DHCP server is disabled, and no address pools are configured.
You must create at least one address pool and enable the DHCP server to
allow the switch to dynamically assign network information to hosts with
DHCP clients that broadcast requests.
The DHCP server can lease a maximum of 256 addresses.
The Dell Networking DHCP server does not offer infinite leases. The
maximum lease time offered is 60 days, which corresponds to an infinite
setting in the UI.