Administrator Guide

110 Hardware Overview
Figure 3-6. Dell Networking N2024 Close-up
The Dell Networking N2024 front panel, shown in Figure 3-6, has status
LEDs for over-temperature alarm (left), internal power (middle), and status
(right) on the top row. The bottom row of status LEDs displays, from left to
right, the Stack Master, redundant power supply (RPS) status, and fan alarm
status.
The Dell Networking N2024P front panel has status LEDs for over-
temperature alarm, internal power and status on the top row. The bottom row
of status LEDs displays Stack Master, modular power supply (MPS), status
and fan alarm status.
Switch Ports
The Dell Networking N2024/N2024P front panel provides 24 Gigabit
Ethernet (10/100/1000BASE-T) RJ-45 ports that support auto-negotiation for
speed, flow control, and duplex. The Dell Networking N2024/N2024P models
support two SFP+ 10G ports. Dell-qualified SFP+ transceivers are sold
separately. Dell Networking N2000 Series switches operate in full-duplex
mode only.
The Dell Networking N2048/N2048P front panel provides 48 Gigabit
Ethernet (10BASE-T, 100BASE-TX, 1000BASE-T) RJ-45 ports that support
auto-negotiation for speed, flow control, and duplex. The Dell Networking
N2048/N2048P supports two SFP+ 10G ports. Dell-qualified SFP+
transceivers are sold separately.