Administrator Guide

Hardware Overview 133
Figure 3-18. Dell Networking N4032 Front Panel
Figure 3-19. Dell Networking N4032F Front Panel
Dell Networking N4032 and N4032F switches can be stacked with other Dell
Networking N4000 Series switches using 10G or 40G SFP+ or QSFP modules
in the module bay.
The Dell Networking N4064 front panel provides 48 x 10GbE copper ports
and two fixed QSFP ports, each supporting 4 x 10G or 1 x 40G connections.
The Dell Networking N4064F front panel provides 48 SFP+ ports supporting
SFP+ and SFP transceivers plus two fixed QSFP ports, each supporting 4 x
10G or 1 x 40G connections.
All Dell Networking N4000 Series ports operate in full-duplex mode only. The
copper ports require that auto-negotiation be enabled. Auto-negotiation
should be disabled for Dell Networking N4000 Series SFP+ ports and
enabled for SFP+ ports with SFP transceivers installed.
10GbE Copper Ports Module bay
USB port
10GbE Fiber Ports Module bay
USB port