Administrator Guide

1440 DHCPv6 Server and Relay Settings
Monitoring DHCPv6 Information
Beginning in Privileged EXEC mode, use the following commands to view
bindings, and statistics, and to clear the information.
ipv6 dhcp server pool-
name
[rapid-commit]
[preference pref-value ]
Configure DHCPv6 server functionality on the interface.
• pool-name — The name of the DHCPv6 pool containing
stateless and/or prefix delegation parameters
•
rapid-commit — Is an option that allows for an
abbreviated exchange between the client and server.
•
pref-value — Preference value — used by clients to
determine preference between multiple DHCPv6 servers.
(Range: 0-4294967295)
CTRL + Z Exit to Privileged Exec Mode.
show ipv6 dhcp interface
[tunnel tunnel-id | vlan
vlan-id ]
View DHCPv6 information for all interfaces or for the
specified interface.
Command Purpose
show ipv6 dhcp binding
[ address ]
View the current binding information in the DHCP server
database. Specify the IP address to view a specific binding.
show ipv6 dhcp statistics View DHCPv6 server and relay agent statistics.
clear ipv6 dhcp statistics Reset all DHCPv6 server and relay agent statistics to zero.
Command Purpose