Administrator Guide

Stacking 221
6 N2024
7 N2024P
8 N2048
9 N2048P
The following is the output on Dell Networking N1500 Series switches:
console#show supported switchtype
SID Switch Model ID
--- --------------------------------
1 N3024
2 N3024F
3 N3024P
4 N3048
5 N3048P
6 N2024
7 N2024P
8 N2048
9 N2048P
2 Preconfigure the switch (SID = 2) as member number 2 in the stack.
console#configure
console(config)#stack
console(config-stack)#member 2 2
console(config-stack)#exit
console(config)#exit
3 Confirm the stack configuration. Some of the fields have been omitted
from the following output due to space limitations.
console#show switch
Management Standby Preconfig Plugged-in Switch Code
SW Status Status Model ID Model ID Status Version
-- ------ ------ -------- -------- ------ -------
1 Mgmt Sw N3048 N3048 OK 6.0.0.0
NOTE: Dell Networking N1500, N2000, and N3000 Series switches cannot be
stacked together.