Administrator Guide

Authentication, Authorization, and Accounting 291
To change the administrative port control:
1
Open the Dot1x Authentication page.
2 Click Show All .
The
Dot1x Authentication Table displays.
3 Scroll to the right side of the table and select the Edit check box for each
port to configure. Change
Admin Port Control to Authorized ,
Unauthorized , or Automode as needed for chosen ports. Only MAC-
Based
and Automode actually use 802.1X to authenticate. Authorized and
Unauthorized are manual overrides.
4 Click Apply .
Admin Port Control is updated for the specified ports, and the device is
updated.
Authenticated Users
The Authenticated Users page is used to display lists of ports that have
authenticated users.
To display the Authenticated Users page, click Switching
 Network Security
 Authenticated Users in the navigation panel.
Figure 10-6. Network Security Authenticated Users