Administrator Guide

Images and File Management 493
Figure 14-9. Image Path
3 View information about the current image.
console#show version
Image Descriptions
image1 :default image
image2 :
Images currently available on Flash
4 Download the image to the switch. After you execute the copy command,
you must verify that you want to start the download.
Use either the
active or backup keyword to select the specified image to
replace (which takes effect only after a reboot). In the following example,
the active image is replaced.
console#copy tftp://10.27.65.103/images/dell_0308.stk active
Mode........................................... TFTP
Set TFTP Server IP............................. 10.27.65.103
TFTP Path...................................... images/
TFTP Filename.................................. dell_0308.stk
Data Type...................................... Code
------- ------------ ------------ --------------- --------------
unit image1 image2 current-active next-active
------- ------------ ------------ --------------- --------------
1 4.1.0.7 5.0.0.8 image1 image1