Administrator Guide

64 Switch Feature Overview
!System Software Version 6.3.0.51
!Image File Name N3000_BGPv6.3.0.51.stk
!Software Capability AGGREGATION ROUTER
When migrating between the two types of images, certain commands in the
startup-config may fail to execute because the relevant feature is not
available. The switch firmware will identify any failed commands. It is
necessary to edit the startup-config if errors are displayed and remove any
failed commands. Do not simply save the running-config when commands in
the startup-config fail, as the startup-config may contain modal commands
that enter into a sub-mode not supported by the firmware. The exit
command to exit the sub-mode may, in fact, exit Global Configuration mode,
causing all subsequent commands to fail, even though those commands may
be valid.