Administrator Guide

672 Access Control Lists
continued • log —Specifies that this rule is to be logged.
•
time-range time-range-name —Allows imposing time
limitation on the ACL rule as defined by the parameter
time-range-name. If a time range with the specified name
does not exist and the ACL containing this ACL rule is
applied to an interface or bound to a VLAN, then the
ACL rule is applied immediately. If a time range with
specified name exists and the ACL containing this ACL
rule is applied to an interface or bound to a VLAN, then
the ACL rule is applied when the time-range with
specified name becomes active. The ACL rule is removed
when the time-range with specified name becomes
inactive.
•
assign-queue queue-id —Specifies the assign-queue,
which is the queue identifier to which packets matching
this rule are assigned.
•{
mirror | redirect } unit/slot/ port —Specifies the mirror
or redirect interface which is the unit/slot/port to which
packets matching this rule are copied or forwarded,
respectively.
interface interface (Optional) Enter interface configuration mode for the
specified interface. The
interface variable includes the
interface type and number, for example tengigabitethernet
1/0/3.
A range of interfaces can be specified using the interface
range command. For example, interface range
tengigabitethernet 1/0/8-12 configures interfaces 8, 9, 10,
11, and 12.
Command Purpose