Users Guide

190 Using Dell EMC OpenManage Switch Administrator
Starting the Application
To access the Dell EMC OpenManage Switch Administrator and log on to
the switch:
1 Open a web browser.
2 Enter the IP address of the switch in the address bar and press <Enter>.
For information about assigning an IP address to a switch, see "Setting the
IP Address and Other Basic Network Information" on page 209.
3 When the Login window displays, enter a username and password.
Passwords and usernames are both case sensitive and alpha-numeric.
Figure 4-1. Login Screen
NOTE: The switch is not configured with a default user name or password.
The administrator must connect to the CLI by using the console port to
configure the initial user name and password. For information about
connecting to the console, see "Console Connection" on page 197. For
information about creating a user and password, see "Authentication,
Authorization, and Accounting" on page 275.