Users Guide

Authentication, Authorization, and Accounting 351
4 Click Apply.
To view the Internal Authentication Server Users Table page, click Show All.
To delete an IAS user:
1 Open the Internal Authentication Server Users Configuration page.
2 From the User menu, select the user to remove, select the user to remove.
3 Select the Remove check box.
Figure 10-11. Removing an IAS User
4 Click Apply.
Configuring IEEE 802.1X (CLI)
This section provides information about commands you use to configure
802.1X and Port Security settings. For additional information about the
commands in this section, see the Dell EMC Networking N1100-ON, N1500,
N2000, N2100-ON, N3000, N3100-ON, and N4000 Series Switches CLI
Reference Guide at www.dell.com/support.
Configuring Basic 802.1X Authentication Settings
Use the following commands to enable and configure 802.1X authentication
on the switch.
Command Purpose
configure Enter Global Configuration mode.