Users Guide

352 Authentication, Authorization, and Accounting
aaa authentication
dot1x default method1
Specify the authentication method to use to authenticate
802.1X clients that connect to the switch.
method1—The method keyword can be radius, none, or
ias.
dot1x system-auth-
control
Globally enable 802.1X authentication on the switch.
interface interface Enter interface configuration mode for the specified
interface. The interface variable includes the interface type
and number, for example tengigabitethernet 1/0/3.
A range of interfaces can be specified using the interface
range command. For example, interface range
tengigabitethernet 1/0/8-12 configures interfaces 8, 9, 10,
11, and 12.
Command Purpose