Users Guide

Authentication, Authorization, and Accounting 405
console(config-CP 4)#interface te1/0/18
...
console(config-CP 4)#interface te1/0/40
console(config-CP 4)#exit
6. Use the web interface to customize the CP pages that are presented to
users when they attempt to connect to the network.
7. Add the Conference users to the local database.
console(config-CP)#user 1 name EaglesNest1
console(config-CP)#user 1 password
Enter password (8 to 64 characters): *********
Re-enter password: *********
console(config-CP)#user 1 group 2
Continue entering username and password combinations to populate the
local database.
8. Add the User-Name, User-Password, Session-Timeout, and Dell-Captive-
Portal-Groups attributes for each employee to the database on the
RADIUS server.
9. Globally enable CP.
console(config-CP)#enable
NOTE: CP page customization is supported only through the web interface.
For information about customizing the CP pages, see "Customizing a Captive
Portal" on page 382.
NOTE: Other items that may need to be configured to obtain a working
configuration are:
• DNS servers
• DHCP servers
• DHCP Relay or DHCP L2 Relay
• Default gateway (if routing is enabled)