Users Guide

554 Images and File Management
ip host labpc2 192.168.3.58
ip host labpc3 192.168.3.59
Configuration script 'labhost.scr' applied.
6 Verify that the script was successfully applied.
console#show hosts
Host name: jmclendon
Default domain: rtp.dell.com
Name/address lookup is enabled
DNS source interface :Default
Name servers (Preference order): 192.168.3.20, 192.168.3.21
Configured host name-to-address mapping:
Host Addresses
------------------------ -----------------------------------
labpc1 192.168.3.56
labpc2 192.168.3.58
labpc3 192.168.3.59
cache: TTL (Hours)
Host Total Elapsed Type Addresses
------------ ------- ------- --------- -----------------------
No hostname is mapped to an IP address
Managing Files by Using the USB Flash Drive
In this example, the administrator copies the backup image to a USB flash
drive before overwriting the backup image on the switch with a new image.
The administrator also makes a backup copy of the running-config by copying
it to a USB flash drive. After the backups are performed, the administrator
copies a new image from the USB flash drive to the switch to prepare for the
upgrade.
This example assumes the new image is named new_img.stk and has already
been copied from an administrative host onto the USB flash drive.
To configure the switch:
1 Insert the USB flash drive into the USB port on the front panel of the
switch. The USB flash drive is automatically mounted.
2 Copy the backup image from the switch to the USB flash drive.
console#copy backup usb://img_backup.stk