Users Guide

738 Access Control Lists
(Continued) – When eq is specified, IPv6 ACL rule matches only if
the layer-4 port number is equal to the specified port
number or portkey.
– When lt is specified, IPv6 ACL rule matches if the
layer-4 destination port number is less than the
specified port number or portkey. It is equivalent to
specifying the range as 0 to <specified port number –
1>.
• destination ipv6 prefix — IPv6 prefix in IPv6 global
address format.
• flow label value — The value to match in the Flow Label
field of the IPv6 header (Range 0–1048575).
• dscp dscp — Specifies the TOS for an IPv6 ACL rule
depending on a match of DSCP values using the
parameter dscp.
• log — Specifies that this rule is to be logged.
• time-range-name — Specifies the named time range to
associate with the ACL rule.
• assign-queue queue-id — Specifies particular hardware
queue for handling traffic that matches the rule.
• mirror interface — Allows the traffic matching this rule
to be copied to the specified interface.
• redirect interface — This parameter allows the traffic
matching this rule to be forwarded to the specified
interface.
interface interface (Optional) Enter interface configuration mode for the
specified interface. The interface variable includes the
interface type and number, for example tengigabitethernet
1/0/3.
A range of interfaces can be specified using the interface
range command. For example, interface range
tengigabitethernet 1/0/8-12 configures interfaces 8, 9, 10,
11, and 12.
Command Purpose