Users Guide

802 VLANs
Configuring VLANs (CLI)
This section provides information about the commands you use to create and
configure VLANs. For more information about the commands, see the Dell
EMC Networking N1100-ON, N1500, N2000, N2100-ON, N3000, N3100-
ON, and N4000 Series Switches CLI Reference Guide at
www.dell.com/support.
Creating a VLAN
Use the following commands to configure a VLAN and associate a name with
the VLAN.
Command Purpose
configure Enter global configuration mode.
vlan vlan-list Create a new VLAN or a range of VLANs and enter the
interface configuration mode for the specified VLAN or
VLANs.
• vlan-list — A list of one or more valid VLAN IDs to be
added. List separate, non-consecutive VLAN IDs
separated by commas (without spaces); use a hyphen to
designate a range of IDs. (Range: 2–4093)
name string Add a name to the specified VLAN.
string — Comment or description to help identify a
specific VLAN (Range: 1–32 characters).
CTRL + Z Exit to Privileged Exec mode.
show vlan [vlan-id |
name vlan-name]
Display VLAN information.
• vlan-id — A valid VLAN ID. (Range: 1–4093)
• vlan-name — A valid VLAN name string. (Range: 1–32
characters)