Users Guide

Security Commands 1014
console(config-radius-da)# server-key 0 “Keep it. Keep it.”
console(config-radius-da)# port 3799
console(config-radius-da)# auth-type any
console(config-radius-da)# exit
console(config)#dot1x system-auth-control
console(config)#dot1x initialize
show dot1x
Use the show dot1x command to display:
• A summary of the global dot1x configuration.
• Summary information of the dot1x configuration for a specified port or all
ports.
• Detailed dot1x configuration for a specified port
• Dot1x statistics for a specified port, depending on the tokens used.
Syntax
show dot1x [interface interface-id [statistics]]
• interface-id—Any valid interface. See Interface Naming Conventions for
interface representation.
Default Configuration
This command has no default configuration.
Command Mode
Privileged Exec mode, Global Configuration mode and all Configuration
submodes
User Guidelines
If you do not use the optional parameters, the command displays the global
dot1x mode, Dynamic VLAN Creation Mode, Monitor Mode, EAPOL Flood
Mode, and the VLAN Assignment mode.
Field Description
Administrative
Mode
Indicates whether authentication control on the switch is
enabled or disabled.