Users Guide

Security Commands 1015
Example
console(config-if-Gi1/0/1)#show dot1x
Administrative Mode............... Disabled
Dynamic VLAN Creation Mode........ Disabled
VLAN Assignment Mode.............. Disabled
Monitor Mode...................... Disabled
EAPOL Flood Mode.................. Disabled
Port Admin Mode Oper Mode Reauth Reauth
Control Period
--------- ------------------ ------------ -------- ----------
Gi1/0/1 auto N/A FALSE 3600
Gi1/0/2 auto N/A FALSE 3600
Gi1/0/3 auto N/A FALSE 3600
MAB Request Fmt Attr1 Groupsize... 2
MAB Request Fmt Attr1 Separator... legacy(:)
MAB Request Fmt Attr1 Case........ uppercase
show dot1x authentication-history
Use the show dot1x authentication-history command to display the dot1x
authentication events and information during successful and unsuccessful
dot1x authentication processes. The command is available to display all
events, or events per interface, or only failure authentication events in
summary or in detail.
Syntax
show dot1x authentication-history {interface-id | all} [failed-auth-only]
[detail]
VLAN Assignment
Mode
Indicates whether assignment of an authorized port to a
RADIUS assigned VLAN is allowed (enabled) or not (disabled).
Monitor Mode Indicates whether the Dot1x Monitor mode on the switch is
enabled or disabled.
Dynamic VLAN
Creation Mode
Indicates if VLANs assigned by the RADIUS server are
dynamically created by the dot1x client.
EAPOL flood mode Indicates whether EAPOL frames are flooded on the interface
or are processed locally by the switch.
Field Description