Users Guide

Security Commands 1019
Example
The following example displays information about the 802.1x clients.
console#show dot1x clients all
Clients Authenticated using Monitor Mode....... 1
Clients Authenticated using Dot1x.............. 1
Interface...................................... Gi1/0/2
User Name...................................... 000102030405
Supp MAC Address............................... 00:01:02:03:04:05
Session Time................................... 518
Filter Id......................................
DACL Name......................................
RADIUS Frame IPv4/IPv6 address.................
VLAN Assigned.................................. 1
Interface...................................... Gi1/0/7
User Name...................................... dell
Supp MAC Address............................... 00:08:A1:7E:45:1A
Session Time................................... 67
Filter Id......................................
DACL Name......................................
RADIUS Frame IPv4/IPv6 address.................
VLAN Assigned.................................. 1
DACL Name The voice VLAN Dynamic IPv4 or IPv6 ACL or the data
VLAN IPv4 or IPv6 Dynamic ACL. The Static keyword
indicates that a pre-configured ACL was assigned. The
downloadable keyword indicates that the ACL definition
was sent in the Access-Accept.
VLAN Assigned The VLAN assigned to the client by the radius server.
When VLAN assignments are disabled, RADIUS server
does not assign any VLAN to the port, and this field is set
to 0.
RADIUS Framed IPv4
Address
The IPv4 address of the 802.1X client received in the
Access-Accept message, if any.
RADIUS Framed IPv6
Address
The IPv6 address of the 802.1X client received in the
Access-Accept message, if any.
Field Description