Users Guide

Security Commands 1023
Example
The following example displays 802.1x statistics for the specified interface.
console#show dot1x interface gigabitethernet 1/0/2 statistics
Port......................................... Gi1/0/2
EAPOL Frames Received.......................... 0
EAPOL Frames Transmitted....................... 0
EAPOL Start Frames Received.................... 0
EAPOL Logoff Frames Received................... 0
Last EAPOL Frame Version....................... 0
Last EAPOL Frame Source........................ 0000.0000.0000
EAP Response/Id Frames Received................ 0
EAP Response Frames Received................... 0
EAP Request/Id Frames Transmitted.............. 0
EAP Request Frames Transmitted................. 0
Invalid EAPOL Frames Received.................. 0
EAPOL Length Error Frames Received............. 0
show dot1x users
Use the show dot1x users command to display 802.1x authenticated users for
the switch.
EAP Request/ID Frames
Transmitted
The number of EAP Req/Id frames that have been
transmitted by this Authenticator.
EAP Request Frames
Transmitted
The number of EAP Request frames (other than Rq/Id
frames) that have been transmitted by this
Authenticator.
Invalid EAPOL Frames
Received
The number of EAPOL frames that have been received
by this Authenticator in which the frame type is not
recognized.
EAPOL Length Error
Frames Received
The number of EAPOL frames that have been received
by this Authenticator in which the Packet Body Length
field is invalid.
Last EAPOL Frame
Version
The protocol version number carried in the most recently
received EAPOL frame.
Last EAPOL Frame
Source
The source MAC address carried in the most recently
received EAPOL frame.
Field Description