Users Guide
Dell EMC Networking CLI 105
• TC — TACACS Configuration
• TRC — Time Range Configuration
• UB—U-boot
• UE — User Exec
• VC — VLAN Configuration (reached via vlan command)
•
VRC—VRF Configuration
• VR—Virtual Router Configuration
• v6ACL — IPv6 Access List Configuration
• v6CMC — IPv6 Class-Map Configuration
• v6DP — IPv6 DHCP Pool Configuration
Layer 2 Commands
ACL
Command Description Mode
a
ip access-list
Creates an Access Control List (ACL) that is
identified by the parameter accesslistnumber.
GC
deny | permit (IP ACL)
The deny command denies traffic if the
conditions defined in the deny statement are
matched. The permit command allows traffic if
the conditions defined in the permit statement
are matched.
ML
deny | permit (Mac-Access-
List-Configuration)
The deny command denies traffic if the
conditions defined in the deny statement are
matched. The permit command allows traffic if
the conditions defined in the permit statement
are matched.
ML
ip access-group
Attaches a specified access-control list to an
interface.
GC or
IC
mac access-group
Attaches a specific MAC Access Control List
(ACL) to an interface in the in-bound
direction.
GC or
IC