Users Guide

Audio Visual Bridging Commands 1119
User Guidelines
MMRP is not compatible the GMRP. Do NOT enable GMRP/GVRP on
MMRP enabled switches.
The clear counters command also clears all MMRP statistics for all interfaces
in addition to clearing other counters.
Command History
Introduced in version 6.2.0.1 firmware.
Example
This example clears the MMRP counters on port channel 1
console#clear mmrp statistics po1
mmrp
This command enables MMRP on a specific interface. Use the no form of the
command to disable MMRP on an interface.
Syntax
mmrp
no mmrp
Default Configuration
By default, MMRP is disabled globally and on all interfaces.
Command Mode
Interface Configuration (Ethernet and port channel) and Interface Range
(Ethernet and port channel)
User Guidelines
MMRP is not compatible with GVRP/GMRP. Do not enable MMRP on
switches enabled for GVRP/GMRP.
Enabling MMRP on an interface automatically disables dynamic MFDB
entry creation. MFDB entries are only configured via MMRP when MMRP is
enabled.