Users Guide

Data Center Technology Commands 1189
Ethernet FC0E 3
TCP/SCTP 3260 4
Enhanced Transmission Selection (ETS)
Commands
NOTE: Enhanced Transmission Selection commands are only supported on N4000 series
switches. CLI commands and Dell OpenManage Switch Administrator pages are
not available for other switch models.
classofservice traffic-class-group
This command maps the internal Traffic Class to an internal Traffic Class
Group (TCG). The Traffic Class can range from 0-6, although the actual
number of available traffic classes depends on the platform.
Use the no form of this command to return system (Global Configuration
mode) or interface (Interface Configuration mode) to the default mapping.
Syntax
classofservice traffic-class-group trafficclass traffic class group
no classofservice traffic-class-group
• trafficclass — The selected traffic class. Range is 0-6.
• trafficclassgroup — The selected group. Range 0-2.
Default Configuration
By default, all the traffic classes are mapped to TCG 0. In the default
configuration, all the Traffic Classes are grouped as one Traffic Class Group
and TCG0 is configured as weighted round robin.
Command Mode
Global Config, Interface Configuration modes
User Guidelines
NOTE: This command is only available on N40xx series switches.