Users Guide

Layer 3 Routing Commands 1408
• vrf vrf-name — Displays the aggregate address information associated
with the named VRF.
Default Configuration
By default, information about the global VRF is shown.
Command Mode
User Exec mode, Privileged Exec mode, Global Config mode and all sub-
modes.
User Guidelines
If the vrf-name argument is specified, information pertaining to that VRF is
displayed.
The following information is displayed.
Fields Description
Admin Mode Whether BGP is globally enabled.
BGP Router ID The configured router ID
Local AS Number The router’s AS number
Traps Whether BGP traps are enabled.
Maximum Paths The maximum number of next hops in an external BGP
route.
Maximum Paths iBGP The maximum number of next hops in an internal BGP
route.
Default Keep Alive Time The configured keepalive time used by all peers that
have not been configured with a peer-specific keepalive
time.
Default Hold Time The configured hold time used by all peers that have not
been configured with a peer-specific hold time.
Number of Network Entries The number of distinct prefixes in the local RIB.
Number of AS Paths The number of AS paths in the local RIB.