Users Guide

Dell EMC Networking CLI 145
TACACS+
802.1x
Command Description Mode
a
a. For the meaning of each Mode abbreviation, see Mode Types .
key Specifies the authentication and encryption key
for all TACACS communications between the
device and the TACACS server.
TC
port Specifies a server port number. TC
priority Specifies the order in which servers are used. TC
show tacacs Displays TACACS+ server settings and
statistics.
PE
tacacs-server host Specifies a TACACS+ server host. GC
tacacs-server key Sets the authentication and encryption key for
all TACACS+ communications between the
switch and the TACACS+ daemon.
GC
tacacs-server source-
interface
Selects the interface from which to use the IP
address in the source IP address field of
transmitted TACACS packets.
GC
tacacs-server timeout Sets the interval for which the switch waits for a
server host to reply.
GC
timeout Specifies the timeout value in seconds. TC
Command Description Mode
a
dot1x dynamic-vlan enable Enables the capability of creating VLANs
dynamically when a RADIUS-assigned VLAN
does not exist in the switch.
GC
dot1x eapolflood Enables the flooding of received IEEE 802.1x
frames in the VLAN.
GC
dot1x initialize Begins the initialization sequence on the
specified port.
PE
mab Enables MAB on an interface. IC