Users Guide

Layer 3 Routing Commands 1582
Command Mode
Interface Configuration (VLAN) mode
User Guidelines
There are no user guidelines for this command.
Example
console(config-if-vlan10)#ipv6 unreachables
show ipv6 brief
Use the show ipv6 brief command to display the IPv6 status of forwarding
mode and IPv6 unicast routing mode.
Syntax
show ipv6 brief
Default Configuration
This command has no default configuration.
Command Mode
Privileged Exec mode, Global Configuration mode and all Configuration
submodes
User Guidelines
This command has no user guidelines.
Example
The following example displays the IPv6 status of forwarding mode and IPv6
unicast routing mode.
console#show ipv6 brief
IPv6 Unicast Routing Mode.................... Enable
IPv6 Hop Limit............................... Unconfigured
ICMPv6 Rate Limit Error Interval............. 1000 msec
ICMPv6 Rate Limit Burst Size................. 100 messages