Users Guide

Dell EMC Networking CLI 159
Priority Flow Control
Layer 3 Routing Commands
ARP (IPv4)
show openflow Displays OpenFlow configuration and status. PE,
GC
a. For the meaning of each Mode abbreviation, see Mode Types .
Command Description Mode
a
a. For the meaning of each Mode abbreviation, see Mode Types .
Data Center Bridging
Capability Exchange
Commands
Enables Priority-Flow-Control (PFC) on an
interface.
DCB
priority-flow-control priority Enables the priority group for lossless (no-drop)
or lossy (drop) behavior on the selected
interface.
DCB
clear priority-flow-control
statistics
Clears all or interface Priority-Flow-Control
statistics.
PE
show interfaces priority-
flow-control
Displays the global or interface priority flow
control status and statistics.
PE
Command Description Mode
a
arp Creates an Address Resolution Protocol (ARP)
entry.
GC
arp cachesize Configures the maximum number of entries in
the ARP cache.
GC
arp dynamicrenew Enables the ARP component to automatically
renew dynamic ARP entries when they age out.
GC
arp purge Causes the specified IP address to be removed
from the ARP cache.
PE
arp resptime Configures the ARP request response timeout. GC
Command Description Mode
a