Users Guide

Layer 3 Routing Commands 1634
Example
console#show ip pim
PIM Mode............................. None
If no routers are enabled for PIM, the following message is displayed.
None of the routing interfaces are enabled for PIM.
show ip pim bsr-router
The show ip pim bsr-router command displays information about a bootstrap
router (BSR).
Syntax
show ip pim bsr-router {candidate|elected}
• candidate – Shows the candidate routers capable of acting as the bootstrap
router.
• elected – Shows the router elected as the PIM bootstrap router.
Default Configuration
There is no default configuration for this command.
Command Mode
User Exec, Privileged Exec mode, Global Configuration mode and all
Configuration submodes
User Guidelines
The following information is displayed:
PIM Mode The routers that are enabled for PIM.
Field Description
BSR address IP address of the BSR.
BSR Priority The configured BSR priority.
BSR Hash Mask Length The configured hash mask length (32 bits maximum).