Users Guide

Layer 3 Routing Commands 1636
Default Configuration
There is no default configuration for this command.
Command Mode
User Exec and Privileged Exec modes, Global Configuration mode and all
Configuration submodes
User Guidelines
There are no user guidelines for this command.
Example
(console)#show ip pim interface
InterfaceVLAN0010
ModeSparse
Hello Interval(secs)30
Join Prune Interval(secs)60
DR Priority1
BSR BorderDisabled
Neighbor Count1
Designated Router192.168.10.1
InterfaceVLAN0001
ModeSparse
Hello Interval(secs)30
Join Prune Interval(secs)60
DR Priority1
BSR BorderDisabled
Neighbor Count1
Designated Router192.168.10.1
If none of the interfaces are enabled for PIM, the following message is
displayed:
None of the routing interfaces are enabled for PIM
Neighbor Count Number of PIM Neighbors learned on this interface
Designated-Router IP address of the elected DR on the interface
Field Description