Users Guide

Dell EMC Networking CLI 167
set extcommunity soo Sets BGP extended community attributes for
the site of origin.
RMC
show bgp ipv6 Displays IPv6 routes in the BGP routing table. UE,
PE,
GC
show bgp ipv6 aggregate-
address
Displays the configured IPv6 aggregate
addresses and indicates if each address is
currently active.
PE
show bgp ipv6 community Displays the IPv6 routes that belong to the
specified set of communities.
PE
show bgp ipv6 community-
list
Displays the IPv6 routes that match a specified
community list.
PE
show bgp ipv6 listen range Displays information about IPv6 BGP listen
ranges.
PE
show bgp ipv6 neighbors Displays neighbors with IPv4 or IPv6 peer
addresses that are enabled for the exchange of
IPv6 prefixes.
PE
show bgp ipv6 neighbors
advertised-routes
Displays IPv6 routes advertised to a specific
neighbor.
PE
show bgp ipv6 neighbors
policy
Displays the inbound and outbound IPv6
policies configured for a specific peer.
PE
show bgp ipv6 neighbors
received-routes
Displays a list of IPv6 routes received from a
specific neighbor.
PE
show bgp ipv6 statistics Displays statistics for the IPv6 decision process. UE,
PE,
GC
show bgp ipv6 summary Displays a summary of BGP configuration and
status.
UE,
PE,
GC
show bgp ipv6 update-group Reports the status of IPv6 outbound groups and
their members.
PE
show bgp ipv6 route-
reflection
Displays a summary of BGP route reflection. PE
show ip bgp Displays BGP routes. UE
Command Description Mode
a