Users Guide

Dell EMC Networking CLI 180
IPv6 Routing
set ip next-hop Specifies the adjacent next-hop router in the
path toward the destination to which the
packets should be forwarded.
RM
set ip precedence Sets the IP precedence bits in the IP packet
header.
RM
show ip brief Displays all the summary information of the IP. PE
Maximum Next
Hops.............................. 16
Displays all pertinent information about the IP
interface.
PE
show ip policy Displays the route maps used for policy based
routing on the router interfaces.
PE
show ip protocols Displays the parameters and current state of the
active routing protocols.
PE
show ip route Displays the routing table. PE
show ip route static Displays the configured routes, whether or not
they are reachable.
PE
show ip route preferences Displays detailed information about the route
preferences.
PE
show ip route summary Shows the number of all routes, including best
and non-best routes.
PE
show ip traffic Displays IP statistical information. UE or
PE
show ip vlan Displays the VLAN routing information for all
VLANs with routing enabled.
PE
show route-map Displays the route maps. PE
show routing heap summary Displays a summary of the memory allocation
from the routing heap.
PE
a. For the meaning of each Mode abbreviation, see Mode Types .
Command Description Mode
a
arp Clears all entries in the IPv6 neighbor table
or an entry on a specific interface.
PE
Command Description Mode
a