Users Guide

Switch Management Commands 1968
DHCPv6 Server Commands
Dell EMC Networking N2000/N2100/N3000/N3100/N4000 Series
Switches
This section explains the following commands:
clear ipv6 dhcp
Use the clear ipv6 dhcp command to clear DHCPv6 statistics for all
interfaces or for a specific interface.
Syntax
clear ipv6 dhcp {statistics | interface vlan vlan-id statistics}
• vlan-id — Valid VLAN ID.
• statistics — Indicates statistics display if VLAN is specified.
Default Configuration
This command has no default configuration.
Command Mode
Privileged Exec mode
User Guidelines
This command has no user guidelines.
clear ipv6 dhcp service dhcp
dns-server (IPv6 DHCP Pool Config) show ipv6 dhcp
domain-name (IPv6 DHCP Pool Config) show ipv6 dhcp binding
ipv6 dhcp pool show ipv6 dhcp interface (User Exec)
ipv6 dhcp relay show ipv6 dhcp interface (Privileged Exec)
ipv6 dhcp server show ipv6 dhcp pool
prefix-delegation show ipv6 dhcp statistics