Users Guide

Switch Management Commands 2095
Use the no form of this command to disable debug tracing of PIMDM packet
reception and transmission.
Syntax
debug ip pimdm packet [receive | transmit]
no debug ip pimdm packet [receive | transmit]
Default Configuration
Display of PIMDM traces is disabled by default.
Command Mode
Privileged Exec mode.
User Guidelines
Debug output should be enabled with caution. Switch behavior may be
adversely affected by the additional processing load incurred from enabling
debug.
Example
console#debug ip pimdm packet
debug ip pimsm packet
Use the debug ip pimsm command to trace PIMSM packet reception and
transmission. The receive option traces only received PIMSM packets and the
transmit option traces only transmitted PIMSM packets. When neither
keyword is used in the command, then all PIMSM packet traces are dumped.
Vital information such as source address, destination address, control packet
type, packet length, and the interface on which the packet is received or
transmitted is displayed on the console. Use the no form of this command to
disable debug tracing of PIMSM packet reception and transmission.
Syntax
debug ip pimsm packet [receive | transmit]
no debug ip pimsm packet [receive | transmit]