Users Guide

Dell EMC Networking CLI 212
show snmp user Displays the configuration of users. PE
show snmp views Displays the configuration of views. PE
show trapflags Displays SNMP traps globally or displays
specific SNMP traps.
PE
snmp-server community Sets up the community access string to permit
access to SNMP protocol.
GC
snmp-server community-
group
Maps SNMP v1 and v2 security models to the
group name.
GC
snmp-server contact Set s up a system contact (sysContact) string. GC
snmp-server enable traps Enables SNMP traps globally or enables specific
SNMP traps.
GC
snmp-server engineID local Specifies the Simple Network Management
Protocol (SNMP) engine ID on the local switch.
GC
snmp-server filter Creates or updates an SNMP server filter entry. GC
snmp-server group Configures a new SNMP group or a table that
maps SNMP users to SNMP views.
GC
snmp-server host Specifies the recipient of SNMP notifications. GC
snmp-server location Sets the system location string. GC
snmp-server user C onfigures a new SNMP Version 3 user. GC
snmp-server view Creates or updates a Simple Network
Management Protocol (SNMP) server view
entry.
GC
snmp-server v3-host Specifies the recipient of Simple Network
Management Protocol Version 3 (SNMPv3)
notifications.
GC
snmp-server source-interface Selects the interface from which to use the IP
address in the source IP address field of
transmitted SNMP traps and informs.
GC
a. For the meaning of each Mode abbreviation, see Mode Types .
Command Description Mode
a