Users Guide

Dell EMC Networking CLI 215
System Management
Command Description Mode
a
asset-tag Specifies the switch asset-tag. GC
banner exec Sets the message that is displayed after a
successful login.
GC
banner login Sets the message that is displayed just before
the login prompt.
GC
banner motd Specifies message-of-the-day banner. GC
banner motd
acknowledge
Acknowledges message-of-the-day banner. GC
buffers Configures the rising and falling thresholds for
the issuance of the message buffer SNMP trap
and notification via a SYSLOG message.
GC
clear checkpoint
statistics
Clears the statistics for the checkpointing
process.
GC
clear counters stack-
ports
Clears the statistics for all stack-ports. PE
connect Connects to the serial console of a different
stack member.
PE
cut-through mode Enables cut-through mode on the switch (if
supported).
GC
exit Disconnects the serial connection to the remote
unit.
UE
hardware profile
portmode
Configures a 40G port in 4x10G mode or
1x40G mode.
IC
hostname Specifies or modifies the switch host name. GC
initiate failover Forces failover of management unit. GC
load-interval Loads the interface utilization measurement
interval.
IC
locate Locates a switch by LED blinking. PE
logout Disconnects the serial connection to a remote
unit on a stack member.
UE