Users Guide

Switch Management Commands 2196
User Guidelines
Debug level messages are intended for use by support personnel. The output
is voluminous, cryptic, and because of the large number of messages
generated, can adversely affect switch operations. Only set the logging level to
debug under the direction of support personnel.
Example
The following example limits SYSLOG messages stored in the logging file to
severity level “warnings” and above (numerically lower).
console(config)#logging file warnings
logging monitor
Use the logging monitor command in Global Configuration mode to enable
logging messages to telnet and SSH sessions with the default severity level.
Use the no logging monitor command to disable logging messages.
Syntax
logging monitor severity
no logging monitor
• severity—(Optional) The number or name of the desired severity level.
Range:
– [0 | emergencies]
– [1 | alerts]
– [2 | critical]
– [3 | errors]
– [4 | warnings]
– [5 | notifications]
– [6 | informational]
– [7 | debugging]