Users Guide

Dell EMC Networking CLI 218
Telnet Server
show users Displays information about the active users,
including which profiles have been assigned to
local user accounts and which profiles are active
for logged-in users.
PE
show version Displays the system version information. UE
stack Sets the mode to Stack Configuration mode. GC
stack-port Sets the mode to Stack Configuration mode to
configure Stack ports as either Stacking ports or
as Ethernet ports.
GC
stack-port shutdown Enables or disable the stack port
administratively.
SC
standby Configures the standby in the stack. SG
switch renumber Changes the identifier for a switch in the stack. GC
telnet Logs into a host that supports Telnet. PE
traceroute Discovers the IP routes that packets actually
take when traveling to their destinations.
PE
traceroute ipv6 Discovers the IP routes that packets actually
take when traveling to their destinations.
PE
update bootcode Updates the boot code on one or more switches. PE
a. For the meaning of each Mode abbreviation, see Mode Types .
Command Description Mode
a
a. For the meaning of each Mode abbreviation, see Mode Types .
ip telnet server disable Enables/disables the Telnet service on the
switch.
GC
ip telnet port Configures the Telnet TCP port number on the
switch.
GC
show ip telnet Displays the status of the Telnet server and the
Telnet TCP port number.
PE
Command Description Mode
a